When writing a number in scientific notation, how many digits should be to
the left of the decimal point?
o
A. None
B. One
C. Two
D. It depends on how precise you want your answer to be.

Answers

Answer 1

Answer:

C

Explanation:


Related Questions

The classification and collection of data that are in the form of numbers is called

Answers

Answer:

Statistics

Explanation:

How can you use the position-time graphs for two in-line skaters to determine if and when one in-line skater will pass the other one?

Answers

Explanation:

Position-time graphs measure/express the position of a skater over time relative to the start or finish of the race (depends on how it is used). Note: are the skaters in line vertically or horizontally? Like is one directly behind the other or are they next to each other?

If the two skaters are in line horizontally with each other, then their position will be the same relative to the start or finish of the race. This means if one passes the other one, the position would be different for all times after they pass. On the graph, it would look like one single line at the start (as position is same) which splits into 2 (representing the new difference in position due to 1 passing the other.

If the two skaters are in line vertically, their lines on the graph will appear parallel to each other (assuming they are going same speed) because the position is changing at the same rate, one is just reaching the same point after the other. If the skater behind overtakes the one in front. The lines on the graph will cross and continue either in parallel but with the other line on top to represent the moment where their position is the same right before they pass and after, where the second skater is now in front.

Hope this helped!

Besides the USA what is another country that does not use the metrio system?​

Answers

Answer:

The USA, Liberia, and Myanmar (Burma) are the only countries that do not use the metric system

only 90% can dothis plz helpme i will give brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest Why magnetic bodies lose magnetic force? Why a nail gets magnetized when kept close to magnet? Why two pins attracted by bar magnet maintain distance between their ends? Why magnet do not have ,magnetic force in middle?

Answers

The force exerted by a magnet is called The push or pull of magnetism can act at a distance, which means that the magnet does not have to touch an object to exert a force on it. ... In fact, magnetism is the result of a moving electric charge.Explanation:

thanks! i need the brainliest to level up :)

1. Heat causes magnetic bodies to lose their magnetic force. For each material of magnet, there is a Curie temperature, or temperature at which the heat will destroy the polarization of the material, causing it to loses its magnetic properties.

2. In unmagnetized materials the domains are randomly aligned in different directions and cancel each other out. In a magnet, all the domains are oriented in the same direction. In the case of a nail, the domains can be aligned in the same direction causing the nail to become magnetic.

3. because after got attracting they will also got act as magnets since they would also get North and South poles so in the case of same poles they had repulsion.

4. We know that magnetic fields exert forces on moving electrons for example. ... When you are in the middle of the magnet, the metal object is being pulled more or less equally in both directions, and so the result is that the object doesn't really feel a force in either direction, they cancel each other out.

i hope this helps you!! <3

what is relation of acceleration of a body to its mass and applied force​

Answers

The law states that external forces cause objects to accelerate, and the amount of acceleration is directly proportional to the net force and inversely proportional to the mass of the object.


If you can’t copy and paste it just reword it

exlpain the process of harvesting ​

Answers

Answer:

harvesting is a proscess of gathering a ripe crop from the fileds

Explanation:

A car goes from 30 m/s to 20 m/s in 2 seconds. What is the acceleration of the car in m/s2?

Answers

Answer:

[tex] \boxed{\sf Acceleration \ of \ the \ car = -5 \ m/s^2} [/tex]

Given:

Initial speed (u) = 30 m/s

Final speed (v) = 20 m/s

Time taken (t) = 2s

To Find:

Acceleration (a) of the car

Explanation:

From equation of motion we have:

[tex] \boxed{ \bold{v = u + at}}[/tex]

By substituting value of v, u & t in the equation we get:

[tex]\sf \implies 20 = 30 + a(2) \\ \\ \sf \implies 2a + 30 = 20 \\ \\ \sf \implies 2a = 20 - 30 \\ \\ \sf \implies 2a = - 10 \\ \\ \sf \implies a = - \frac{10}{2} \\ \\ \sf \implies a = - 5 \: m {s}^{ - 2} [/tex]

[tex] \therefore[/tex]

Acceleration (a) of the car = -5 m/s²

A test car carrying a crash test dummy accelerates from 0 to 30 m/s and then crashes into a brick wall. Describe the direction of the initial acceleration vector and compare the initial acceleration vector’s magnitude with respect to the acceleration magnitude at the moment of the crash. [*** DRAW A DIAGRAM ***]

Answers

Answer:

the direction of acceleration of the vehicle is the same direction of its velocity of car

s acceleration has the opposite direction to the car speed.

Explanation:

The initial acceleration of the car can be calculated with

          v = v₀ + a t

          a = (v-v₀) t

       

indicate that the initial velocity is zero (v₀ = 0 m / s)

         a = v / t

         a = 300 / t

the direction of acceleration of the vehicle is the same direction of its acceleration movement.

When the car collides with the wall, it exerts a force in the opposite direction that stops the vehicle, therefore this acceleration has the opposite direction to the car speed. But your module must be much larger since the distance traveled to stop is small

An egg falls out of a nest of a tree. It freefalls for 1.5 seconds, and then hits the ground. From how high up did the egg fall?

Answers

Answer:

11.025m

Explanation:

Using kinematics,

u = Initial velocity = 0.

t = Time taken = 1.5sec.

a = Acceleration from gravity = 9.8m/s^2

Distance = s

= ut + 1/2 * a * t^2

= 0 + 1/2 * 9.8 * (1.5)^2

= 11.025m

The egg fall from the nest of a tree is 11.025 m.

To find height from where the egg fall, the given values are:

Time taken t = 1.5 seconds.

What is the distance of the egg fall? The egg  was falling from the nest of a tree.

By knowing the concept of Kinematics,

  For a particle moving with a constant acceleration, its displacement after a time period is given by

           s = ut +1/2 at²

where, u - initial velocity,

t - Time,

a - acceleration.

As u is the Initial velocity = 0.

t = 1.5s

Acceleration from gravity = 9.8m/s²

Here, Distance = s

Substituting all the values in the formula,

s = ut + 1/2 ( a × t²)

  = 0 + 1/2 × 9.8 × (1.5)²

Distance s = 11.025m

So, the distance the egg fall from a nest of a tree is s = 11.025 m.

Learn more about Kinematics,

https://brainly.com/question/24458315

#SPJ2

what are the 5 native elements?

Answers

Answer:

platinum, iridium, osmium, iron, zinc

As Sam comes to a stop on his bike, he slows from 9.00m/s to 0.00m/s in 5.00 seconds. Find the average acceleration of Sam on his bike. Hint: It will be a negative number.

Answers

Explanation:

Acceleration is change in velocity over time.

a = (v − v₀) / t

a = (0.00 m/s − 9.00 m/s) / 5.00 s

a = -1.80 m/s²

Which scientist created the most modern classification that we use today

Answers

Answer:

A. Aristotle

Explanation:

Answer:

A: Aristotle

Explanation:

There is no explanation

HEY CAN ANYONE PLS HELP ME IN DIS! Which prefix represents a unit that is larger than "centi-" ? a. "nano-" b. "pico-" c. "milli-" d. "deci-" e. "micro-"

Answers

i believe it’s d.)deci

action and reaction are equal in magnitude and opposite in direction then , why do not they balance each other​

Answers

Explanation:

Newton’s third law of motion states that every action has an equal and opposite reaction. This indicates that forces always act in pairs. Reaction forces are equal and opposite, but they are not balanced forces because they act on different objects so they don’t cancel each other out.

What actions are permissible when you are graphically adding one vector to another?

Answers

Answer:

1. Which of the following actions is permissible when you are graphically adding one vector to another:

Explanation:

: move the vector, rotate the vector, change the vector's length?

When you graphically add one vector to another, you can only move the vector as long as you don't modify its length or the direction it points in.

What are vector quantities?

In physics, a vector is a quantity with both a magnitude and a direction. It is often represented by an arrow whose length is proportional to the magnitude of the quantity and whose direction is the same as that of the quantity.

A vector does not have position, while having magnitude and direction. In other words, a vector's shape is unaltered if it is shifted parallel to itself as long as its length is unaltered.

Hence, when you are graphically adding one vector to another, permissible action is move the vector as long as you don't modify its length or the direction it points in.

Learn more about vector here:

https://brainly.com/question/29740341

#SPJ2

A force of 25N acts on a body of mass 9 kg. calculate the acceleration produced​

Answers

Answer:

2.7

Explanation:

[tex]Force = 25N\\mass = 9 kg\\acceleration = ?\\\\Force = mass \times acceleration\\\frac{Force}{mass}= acceleration\\ \\Acceleration = \frac{25}{9} \\\\Acceleration = 2.7[/tex]

Using the equation E = mc2, calculate how many joules of energy would be produced by converting 6.8 × 10-6 kg of matter into energy in this fusion reaction. Use c = 3 × 108 m/s.

Answers

Answer:

Explanation:

Using the formula : E = mc²

Where m = mass = 6.8 × 10^-6 kg

c = speed of light = 3 ×10^8 m/s

The amount of joules of energy that would be produced equals :

Plugging in our values :

E = mc²

E = (6.8 × 10^-6) kg × (3 ×10^8)²m/s

E = (6.8 × 10^-6) kg × 9 × 10^16 m/s

E = 61.2 × 10^(-6 + 16)

E = 61.2 × 10^10 J

Answer:

E = 6.12 × 1011 kg × m2/s2

Explanation:

What is the acceleration of a car that goes from zero to 60m/s in 15s?

Answers

Answer:What is the acceleration of a car that moves from rest to 15.0 m/s in 10.0 s? Vi=0, vf= 15.0 m/s,t=10.0s, a=? a= vf =vi/tA=15.0m/s-0m/s/10.0s = 15.0s/10.0s m/s*1/s =1.50 m/s^2 11.

Explanation:

Select the correct answer.
Matthew uses the combine harvester to harvest his crops. Which PPE should Mathew use?
А. сар
B.
earmuffs
C. gloves
D. respirator
E. safety glasses

Answers

Answer:

Matthew should use the safety glasses as his PPE.

Explanation:

the answer is E. safety glasses

which scenario is an example of a scientific way of thinking?

Answers

Answer:

A example of a scientific way of thinking is making observations, forming questions, making hypotheses, doing an experiment, analyzing the data, and forming a conclusion.

If Angela ran to the bus and back to where she started what distance would she travel ?

Answers

Answer:

Distance = 30 m

Explanation:

Since the position of the bus is at zero, and distance is a scalar quantity. That is, we are only concerned about the magnitude

If Angela ran to the bus and back to where she started, the distance travelled will be:

Distance = 15 + 15 = 30 m

But her displacement will be:

Displacement = 15 - 15 = 0.

Tor F
Science and technology
are
mutually beneficial.

Answers

Answer:

I believe that it's True.

Which structure is represented by the letter D? Choose 1 answer: (Choice A) A Chloroplast (Choice B) B Vacuole (Choice C) C Mitochondria (Choice D) D Nucleus

Answers

Answer:

vacuole

Explanation:

Remember vacuoles in plant cells are a lot bigger than there animal cell counterparts.

2. A car is moving south. It is getting faster. In which direction is the acceleration?
North
South
hy
Up
Down

Answers

South it is the same direction the car is already moving

what is machine
and type of machine​

Answers

Printer could be a machine

Answer:

A machine is a mechanical structure that uses power to apply forces and control movement to perform an intended action.

Explanation:

Example: Elevator

A straw is placed in a cup of water. The straw has a diameter of 5 mm, the contact angle is 60 degrees and the surface tension of water is 0.073 Nm. Calculate the change in elevation between the water surface in the cup and that in the straw.

Answers

Answer:

The change in elevation is 0.0029mm

Explanation:

This problem is on the capillary action of water and tube

we are going use the formula below for the rise in liquid level

h= 2Tcos∅/rgρ

where h= height of liquid level in the capillary tube

          T= surface tension = 0.073 Nm

          ∅= angle of contact = 60 degrees

          r= radius of bore of capillary tube = 5/2= 2.5 mm to m= 2.5/1000=  

          2.5*10^-3

          g= acceleration due to gravity = 9.81 m/s^2

         ρ= density of the liquid (assume water 1000 kg/m³)

we can now substitute to solve for h

[tex]h=\frac{2*0.073cos60}{ 2.5*10^-^3*9.81*10^3} \\\\h=\frac{2*0.073*0.5}{ 2.5*9.81}\\\\h=\frac{0.073}{ 2.5*9.81}\\\\h=\frac{0.073}{ 24.525}\\\\h=\frac{0.073}{ 24.525}\\\\h= 0.0029\\h= 2.9*10^-^3mm[/tex]

A watch manufacturer claims that its watches gain or lose no more than 8 seconds in a year. How accurate are these watches, expressed as a percentage?

Answers

Answer:

Accurate at 99.9999746%

Explanation:

First of all, let's calculate how many seconds we have in a year which has 365 days.

1day = 24 × 60 × 60 seconds = 86400 s

Thus, for 365 days, we have;

86400 × 365 = 31536000 seconds

Now, since 1 year has 31536000 seconds, let's find the ratio of efficiency.

We are told that the watch manufacturer claims that its watches gain or lose no more than 8 seconds in a year. Thus, efficiency is given by;

Efficiency = (8/31536000) × 100% = 0.00002536783 %

Thus, it will be be accurate at;

100% - 0.00002536783% ≈ 99.9999746%

A point charge of +3 C is located at the origin of a coordinate system and a second point charge of -6 C is at x = 1.0 m. At what point on the x-axis is the electrical potential zero?

Answers

Answer:

The point at which the electrical potential is zero is x = +0.33 m.

Explanation:

By definition the electrical potential is:

[tex] V_{E} = \frac{K*q}{r} [/tex]

Where:

K: is Coulomb's constant = 9x10⁹ N*m²/C²

q: is the charge

r: is the distance

The point at which the electrical potential is zero can be calculated as follows:

[tex] V_{1} + V_{2} = 0 [/tex]

[tex] K(\frac{q_{1}}{r_{1}} + \frac{q_{2}}{r_{2}}) = 0 [/tex]    (1)

q₁ is the first charge = +3 mC

r₁ is the distance from the point to the first charge  

q₂ is the first charge = -6 mC

r₂ is the distance from the point to the second charge    

By replacing r₁ = 1 - r₂ into equation (1) we have:

[tex]K(\frac{q_{1}}{1 - r_{2}} + \frac{q_{2}}{r_{2}}) = 0[/tex]   (2)

By solving equation (2) for r₂:

[tex]r_{2} = \frac{q_{1}}{q_{1} - q_{2}} = \frac{3 mC}{3 mC - (-6 mC)} = +0.33 m[/tex]

                 

Therefore, the point at which the electrical potential is zero is x = +0.33 m.

I hope it helps you!  

Since the two charges are placed on the x-axis. Then, the electric potential is zero at the distance of 0.66 m from the second point charge on the x-axis.

What is electric potential?

The electric potential at any point is the amount of work needed to move a unit positive charge from infinity to that point.

Given data-

The magnitude of a point charge is, Q = + 3 C.

The magnitude of the second point charge is, Q' = -6 C.

The distance between the two charges is, x = 1.0 m.

The expression for the net electric potential due to both the charges is,

[tex]V = \dfrac{k \times Q}{x} +\dfrac{k \times Q'}{x-y}[/tex]

here,

k is the Coulomb's constant.

y is the distance from the second point charge on the x-axis, where the net potential is zero.

Now, for zero net electric potential due to both the charges we have,

[tex]0 = \dfrac{k \times Q}{x-y} +\dfrac{k \times Q'}{y}\\\\\\-\dfrac{k \times Q'}{y}=\dfrac{k \times Q}{x-y}[/tex]

Solving as,

[tex]-\dfrac{(-6)}{y}=\dfrac{3}{1-y}\\\\6-6y=3y\\\\y =0.66\;\rm m[/tex]

Thus, we can conclude that the electric potential is zero at the distance of 0.66 m from the second point charge on the x-axis.

Learn more about the electric potential here:

https://brainly.com/question/13296426

Help me plz science middle school

Answers

The correct answer is A. He created a way of naming organisms based on genus and species

Explanation:

Carl Linnaeus created a simple but precise system for naming organisms of any species and kind. This system was known as binomial nomenclature and the names of organisms depend on two main elements: the genus and the species. The first element is a broad category that covers species with a common origin, and the second one is the species, which describes organisms that can reproduce and share many common features including DNA sequence. According to this, the correct answer is A.

Why are chloroplasts found in plant cells but NOT in animal cells?

Answers

Answer:

Its is because plants dont get sugar from eating food so, they need chloroplast to make food with the help of sunlight.Whereas animal can get sugar from the food they eat.

Other Questions
The following is an example of what type of figurative language?The dog was a rocket.simileO metaphorironyidiom The science department hypothesized that giving their students snacks would improve their performance in class. Upon reviewing the scores, they noticed that some students who usually have higher scores actually made lower scores on the weekly assessment. At this point, what should the teachers do? A. Develop a new experimentB. Analyze the data again C. Revise their hypothesis D. Conduct the experiment again What is the y-value when x = 0 in the function below? y=x+2 Increasing temperature can What is the effect of an enzyme has On the energy of a chemical reaction Tavon has a gift card for $115 that loses $2.50 for each 30-day period it is not used. He has another gift card for $95 that loses $2 for each 30-day period it is not used. 12 - 3x = -6xIm confused on how to solve for X if they are on both sides You are trying to determine information about the structure of a protein that you have purified. You carry out a series of experiments on this protein. The results are listed below.1. Size exclusion (aka gel filtration) chromatography of the protein indicates an apparent molecular weight of 240,000 kDa. 2. SDS polyacrylamide gel electrophoresis of the protein carried out WITHOUT the addition of a disulfide-bond reducing agent shows the protein as having an apparent molecular weight of 60,000 kDa. 3. After treatment with performic acid, which cleaves disulfide bonds, the same technique (SDS PAGE) reveals two bands of molecular weights 34,000 kDa and 26,000 kDa. 4. N-terminus identification shows Ala and Leu as amino terminal residues, in equal amounts.Describe what you can determine about the protein's structure from the above information by answering the questions below. a. Molecular weight of the native functional protein. b. Does the protein contain any disulfide bonds? If yes, can you estimate how many ?c. Can you determine anything about any secondary structure of the protein? If yes, what? d. Does the protein have quaternary structure? If yes, how many subunits, of what size? What is the equation of a line with a slope of 2 that passes through the point (6, 8)? Biological influences on body weight include genetics (such as the FTO-associated gene), metabolic factors (such as low levels of thyroid hormone), and physiologic factors (such as abnormal levels of various appetite-regulating hormones). From the list below, choose all the correct statements about biological influences on body weight.a. Obesity is associated with lower amounts of UCP1.b. The thrifty gene theory suggests that people with this gene universally expend more energy compared to those without the gene.c. The set-point theory suggests that the body responds to both energy restriction and overeating with physiological changes to maintain its weight within a narrow range.d. Genetic factors account for 20 to 50% of a persons BMI.e. People who have the fat mass and obesity (FTO)-associated gene are generally heavier than those without the gene. 2y^2-8=6-2y^2can someone help 4. Compare your observations of micrographs obtained from the optical microscope, the scanning electron microscope, and the transmission electron microscope. 3. Complete the following table with the mathematical statements that4(x-3)= 20.3correspond to the proofs used to solveProofStatements4(x - 3)= 203GivenMultiplication Property of EqualityDistributive PropertyAddition Property of Equality Pillbugs are placed in a container where they have a choice of wet or a dry environment. Researchers record how much time was spent on each side ? Im confused and I just need a little help understanding What is the answer ? PLEASE HELP!!! Select all the equations that represent the distance formula. Greg is saving to buy a tablet that costs $235. He already has $25 saved up. Each week, Greg earns $15 babysitting and $25 as a cashier, but he spends $10 on lunches. Write and solve an equation to find how many weeks it will take Greg to have enough money saved to buy the tablet. What debt was the Stamp Act supposed to pay for? * how many calendars did the maya have? how accurate were they?