Answer:
A System
Explanation:
There are many systems including the circulatory and nervous system where multiple organs work together to perform a job.
The displacement d (m) of a block sliding along a straight line is given by the equation d = -0.65 t + 0.21 t2, where t is the time in seconds. What is the instantaneous velocity of the block when t = 2.0 s?
Answer:
0.19m/sExplanation:
velocity is the change in displacement of a body with respect to time. Given the displacement d (m) of a block sliding along a straight line is given by the equation d = -0.65 t + 0.21 t², where t is the time in seconds, instantaneous velocity is expressed by differentiating the displacement with respect to time
Velocity = dd/dt
Velocity = -0.65 + 2(0.21)t²⁻¹
Velocity = -0.65 + 0.42t
The instantaneous velocity of the block when t = 2.0 s can be gotten by substituting t = 2.0s into the expression above:
Velocity = -0.65 + 0.42(2)
Velocity = -0.65 + 0.84
Velocity = 0.19
Hence the instantaneous velocity of the block when t = 2.0 s is 0.19m/s
If a dog moves 3 meters due East and then 4 meters due North, what will be the dispalcement of the dog?
Answer:
5 mExplanation:
Displacement is the diatnce moves in a specified direction. It is the shortest distance covered by the dog. The displacement of the dog can be gotten by using the pythagoras theorem as shown;
According to the theorem, a²+b² = d² where d is the displacement
Substituting the given value into the fofrmula;
3²+4² = d²
9+16 = d²
d² = 25
square root both sides
√d² = √25
d = √25
d = 5 metres
Hence the displacement of the dog is 5metres
Drag the tiles to the correct boxes to complete the pairs.
Match the following astronomers to their contributions.
Galileo Galilei
Albert Einstein
Henrietta Swan Leavitt
Edwin Hubble
Georges Lemaître
theorized that the universe had a beginning
showed that the universe was expanding
demonstrated a method to calculate the distance of celestial bodies
was the first to use a telescope to observe the planets
huit a model of the inverse haced on relativity
2020 Edmentum. All rights reserved.
Answer:
Georges Lemaître - theorized that the universe had a beginning
Albert Einstein - huit a model of the inverse haced on relativity
Galileo Galilei - was the first to use a telescope to observe the planets
Edwin Hubble - showed that the universe was expanding
Henrietta Swan Leavitt - demonstrated a method to calculate the distance of celestial bodies
is my choices report if wrong
Galileo Galilei was the first to use a telescope to observe the planets
Albert Einstein built a model of the universe based on relativity
Henrietta Swan Leavitt demonstrated a method to calculate the distance of celestial bodies
Edwin Hubble showed that the universe was expanding
Georges Lemaître theorized that the universe had a beginning
What is science?Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.
A method of learning about the world is science. Science allows people to participate in the creation of new knowledge as well as use that knowledge to further their goals. It is both a process, a product, and an institution.
Thus, The first person to observe the planets through a telescope was Galileo Galilei.
Based on relativity, Albert Einstein created a model of the universe.
A technique to determine the separation between celestial bodies was demonstrated by Henrietta Swan Leavitt.
Edwin Hubble demonstrated the expansion of the universe
According to Georges Lemaître, the universe had a beginning.
Learn more about the science here
https://brainly.com/question/18186842
#SPJ5
8. An airplane heading to Paris from Houston travels 5000 miles at 500 mph. How long will it take the airplane to get to Paris?
Answer:
10 hours to get to Paris
If 2 different processes driven by heat transfer start at state 1 and end at state 2 BUT follow different paths, is the amount of energy transferred by heat the same for each path? Yes or no?
A runner moves west with an initial velocity of 4 m/s. She accelerates 3 m/s2 for 30 seconds. The runner’s final velocity is?
Hello! The answer to this would be 94m/s3 I believe. I’m not for sure with the units but in order to find the answer, you would need to use the equation Vf=VI+(a x t) you would plug in the numbers, so in you case you would plug in, Vf= 4m/s +(3m/s2 x 30s) and you would get solve. I’m so sorry that I’m not certain with the units but I hope this helps you understand! Good luck :)
Her final velocity is 94 m/s West, and her legs are all blurry because she is running at a little bit over 210 mph. Bet she can't keep that up for too long.
science numerical problem .Hari drag a load a of 60 kg along a distance of 12 m . what amount of work does he do? as 0 mention the type of work
We don't know, and we don't have enough information to calculate it.
The weight of the 60kg load is (m g) = 588 Newtons.
IF Hari wanted to lift the load 12m straight up, he would have to do
(Force x distance) = (588 N) x (12 m) = 7,056 Joules of work.
But to drag it, he has to provide enough force to balance out the force of friction, and we don't know how much that is. It depends on the weight of the load, the shape of the load, the smoothness of the part of the load that sits on the ground, and the smoothness of the ground. But the only thing we know is the weight of the load.
Henry was giving the school toy for his birthday he can use it to tell how fast someone is moving at the moment in time the toy miss calculate the persons
Answer:
The toy must calculate the person's speed/velocity
Explanation:
Since the school toy given to Henry can be used to tell how fast someone is moving, the toy must be able to calculate the person's speed/velocity using the average distance covered by the person divided by time taken to cover the distance; average distance ÷ time taken.
The toy must be able to determine the parameters (average distance and time taken) in order to be able to calculate the person's speed/velocity
When a student stands on a rotating table,the frictional force exerted on the student by the table is?
Answer:
Less
Explanation:
because static friction is more than rolling friction
which process must occur for clouds to form?
The phenomenon is called as condensation in which the water droplets combine together to form clouds. So, the correct option is D.
What is Condensation?Condensation is defined as the change of state of matter from the gas phase to the liquid phase, and is the reverse of evaporation which often refers to the water cycle.
Condensation is described as the process where water vapor becomes liquid which is the opposite of evaporation, where liquid water becomes vapor. Condensation happens in one of two ways which are as follows: either the air cools to its dew point or it becomes so saturated with water vapor that it cannot hold any more water.
Thus, the phenomenon is called as condensation in which the water droplets combine together to form clouds. So, the correct option is D.
Learn more about Condensation, here:
https://brainly.com/question/956180
#SPJ6
Your question is incomplete, most probably the complete question is :
Which process must occur for clouds to form?
(1) conduction (2)erosion (3) precipitation (4) condensation
PLZ HELP TIMES TEST
When a person strikes and lights a match, potential energy in the match is transformed into which types of energy?
electrical and thermal
thermal and radiant
radiant and nuclear
nuclear and kinetic
Answer:
Thermal and Radiant
Explanation:
Thermal = Heat
Radiant = Light
Answer: B
Explanation:
What happens to scientific laws if new, unexpected data is discovered? a They become scientific theories. b They are revised. c Nothing, the new data is ignored.
Answer:
revised
Explanation:
scientific theories cannot change once they've been written down true or false
Answer:
Yes
Explanation:
Answer: false
a theory is just an idea, so it can be changed, while a scientific fact is true and wont be changed
A light-rail train going from one station to the next on a straight section of track accelerates from rest at 1.1m/s^2 for 20s. It then proceeds at constant speed for 1100 m before slowing down at 2.2m/s^2 until it stops at the station. a. What is the distance between the stations? b. How much time does it take the train to go between the stations?
Answer:
A.) 1430 metres
B.) 80 seconds
Explanation:
Given that the train accelerates from rest at 1.1m/s^2 for 20s. The initial velocity U will be:
U = acceleration × time
U = 1.1 × 20 = 22 m/s
It then proceeds at constant speed for 1100 m
Then, time t will be
Time = distance/ velocity
Time = 1100/22
Time = 50 s
before slowing down at 2.2m/s^2 until it stops at the station.
Deceleration = velocity/time
2.2 = 22/t
t = 22/2.2
t = 10s
Using area under the graph, the distance between the two stations will be :
(1/2 × 22 × 20) + 1100 + (1/2 × 22 × 10)
220 + 1100 + 110
1430 m
The time taken between the two stations will be
20 + 50 + 10 = 80 seconds
6. Amy spits watermelon seeds at 1.8 m/s. How far will the seed travel in 1.2 s?
Answer:
2.16 meters
Explanation:
We can find distance using the following formula.
[tex]d=s*t[/tex]
where [tex]s[/tex] is the speed and [tex]t[/tex] is the time.
The speed of the watermelon seed is 1.8 meters per second. The time is 1.2 seconds.
[tex]s= 1.8 m/s\\t=1.2 s[/tex]
Substitute the values into the formula.
[tex]d= 1.8 m/s * 1.2 s[/tex]
Multiply. When you multiply the 2 "s" that represent seconds will cancel out.
[tex]d= 1.8 m * 1.2[/tex]
[tex]d=2.16 m[/tex]
The watermelon seed with travel 2.16 meters in 1.2 seconds.
how does diffusion support the idea that matter is made up of particles
Explanation:
because when diffusion occurs it is as a result of the particles moving around freely in open space
The fact that matter is composed of particles and that these particles are incredibly tiny and have space between them supports the theory that matter is composed of particles.
What is diffusion?The mixing of materials is caused by the free movement of their particles is known as diffusion.
Even with a strong microscope, the substance is composed of microscopic particles that cannot be seen. The matter is anything that is both mass- and space-having. Small particles make up matter.
Because the particle's unrestricted movement in an open environment causes diffusion to happen.
Hence, diffusion supports the idea that matter is made up of particles.
To learn more about diffusion refer to;
https://brainly.com/question/13513898
#SPJ2
A typical galaxy contains about 100 billion stars, and there are approximately 100 billion galaxies in the observable universe. About how many stars are in the observable universe
Answer = (100 billion stars/galaxy) x (100 billion galaxies/universe)
Answer = (100 billion x 100 billion) stars
Answer = 10,000 billion billion stars
Answer = 10,000,000,000,000,000,000,000 stars
Answer = 10²² stars/observable universe
The number of stars in the observable universe is; 10²² stars/observable universe.
How many stars are in the observable universe?Since there are about 100 billion stars in our galaxy; we can rewrite that to be;
100 billion stars/galaxy
However, there are about 100 billion galaxies in the observable universe.
Since our galaxy is one of the 10¹¹ observable galaxies in the universe; the number of stars in the observable universe is;
(100 billion stars/galaxy) x (100 billion galaxies/universe)
= (100 billion x 100 billion) stars
= 10,000 billion billion stars
= 10,000,000,000,000,000,000,000 stars
= 10²² stars/observable universe
Therefore, the number of stars in the observable universe is; 10²² stars/observable universe.
Read more the similar concept here;
brainly.com/question/24291110
#SPJ2
Kinetic energy depends on the height of an object above the ground?
What is your understanding of science?
Answer:Science is a method of learning things about the world and environment we live in today . It gives us a better understanding of the natural world and how it works
Explanation:
Hurry!! Physical science
Answer:
time stirred and amount of water
all of the answers are true
Answer:
All are True
Explanation:
Energy is both coming and leaving and so on.
3. Daniel stands on a bridge over a river. He drops a coin and notes that the coin takes 3 s to reach the river below.
He must be standing
above the river.
A 10 m
B. 15 m
C. 30 m
D. 45 m
Answer:
45 m
Explanation:
Initial velocity of the coin = 0 m/s (since he dropped it from his hands)
time spent in falling - 3 sec
distance s = ?
using
s = ut + [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex]
where
s is the distance the stone fell
u is the initial velocity
t is the time spent falling
g is acceleration due to gravity = 10 m/s^2 (positive downwards)
substituting values, we have
s = (0 x 3) + [tex]\frac{1}{2}[/tex](10 x [tex]3^{2}[/tex])
s = 45 m
a bee travels 7.6 m in 38 seconds. what is it’s velocity?
Answer:
Velocity=0.2m/s
Explanation:
Velocity=displacement / time
Velocity=7.6m/38s
Velocity=0.2m/s
A car accelerates from rest at a stop sign at a rate of 3.0 m/s^2 to a speed of 21.0 m/s, and then immediately begins to decelerate to a stop at the next stop sign at a rate of 4.0 m/s^2. How long did it take the car to travel from the first stop sign to the second stop sign? Show your work.
Answer:
t = 12.25 s
Explanation:
First we calculate the time taken by the car during accelerating motion, we use 1st equation of motion:
Vf = Vi + at₁
where,
Vf = Final Velocity = 21 m/s
Vi = Initial Velocity = 0 m/s
a = acceleration = 3 m/s²
t₁ = time taken during acceleration = ?
Therefore,
21 m/s = 0 m/s + (3 m/s²)t₁
t₁ = (21 m/s)/(3 m/s²)
t₁ = 7 s
Now, we use the same equation to find out the time taken during deceleration motion, with following data:
Vf = Final Velocity = 0 m/s
Vi = Initial Velocity = 21 m/s
a = deceleration = -4 m/s²
t₂ = time taken during deceleration = ?
Therefore,
0 m/s = 21 m/s + (-4 m/s²)t₂
t₂ = (-21 m/s)/(-4 m/s²)
t₂ = 5.25 s
Therefore, the total time taken by the car to travel from first stop sign to second stop sign is:
t = t₁ + t₂
t = 7 s + 5.25 s
t = 12.25 s
Answer:
12.25s
Explanation:
compare mass and weight
Answer:
The mass of an object is a measure of the object's inertial property, or the amount of matter it contains. The weight of an object is a measure of the force exerted on the object by gravity, or the force needed to support it. The pull of gravity on the earth gives an object a downward acceleration of about 9.8 m/s2.
. Explain how surface waves can have characteristics of both longitudinal waves and transverse waves.
Please use 3 content related sentences. (ref: p.388-393)
Answer:
This whole concept depends on the depends on the direction of propagation of the surface wave or displacement of wave such that if its in direction of wave velocity its said to features of longitudinal wave and if its in direction at 90° to wave velocity its said to have transverse features
What’s 2.3 miles into kilometers
Answer:
3.70149
Explanation:
Please help with these physics problems 1. A soccer ball is dropped from the top of a building. It takes 5.8 seconds to fall to the ground. The height of the building is...? 2. The Falcon 9 launches to a height of 123 meters. What is its vertical initial velocity? 3. An apple falls from rest off a 10.m m tree. How long will it take before it hits the ground?
Answer:
1.) h = 164.8 m
2.) U = 49.1 m/s
3.) t = 1.43 seconds
Explanation:
1.) A soccer ball is dropped from the top of a building. It takes 5.8 seconds to fall to the ground. The height of the building is...?
Since the soccer ball is dropped from the building, the initial velocity U will be equal to zero
Using second equation of motion
h = Ut + 1/2gt^2
Substitutes the time into the formula
h = 1/2 × 9.8 × 5.8^2
h = 164.8 m
2. The Falcon 9 launches to a height of 123 meters. What is its vertical initial velocity?
At maximum height final velocity = 0
Using the third law of motion
V^2 = U^2 - 2gH
0 = U^2 - 2 × 9.8 × 123
U^2 = 2410.8
U = 49.1 m/s
3. An apple falls from rest off a 10.m m tree. How long will it take before it hits the ground?
Since the apple fall from rest, the initial velocity U will be equal to zero
Using the second equation of motion,
h = Ut + 1/2gt^2
substitute all the parameters into the formula
10 = 1/2 × 9.8 × t^2
10 = 4.9t^2
t^2 = 10/4.9
t^2 = 2.04
t = 1.43 seconds
Conduction occurs when thermal energy is transferred by the movement of
a. Waves
b. molecules
c. liquids
d. fluids
Answer: Molecules
Explanation:
Answer:
B. molecules
Explanation:
got 100% on the edge quiz
If an athlete completes a cycle around a circular track, his displacement eauals to ZERO.
O True
O False
The statement is TRUE.
"Displacement" means the distance and direction from the start-point to the end-point, NO MATTER how you got there.
If you go out cycling and go back home when you're done, your displacement is zero. it doesn't matter how far you cycled, or what streets or woods you cycled through, or whether your route was a circle, a square, an ellipse, a triangle, or a jumble, or whether you cycled around and around the same path 27 times. You ended right where you started. The distance from your start-point to your end-point is zero, so your displacement is zero.
What are the benefits of vitamin K
Answer:Vitamin K is an important factor in bone health and wound healing. Vitamin K is a fat-soluble vitamin that makes proteins for healthy bones and normal blood clotting. According to the Harvard School of Public Health, vitamin K helps produce four of the 13 proteins needed for blood clotting.
Explanation: