true or false

The Total electric potential due to two or more charges is equal to the algebraic sum of the potentials due to the individual charges.

Answers

Answer 1

Answer:

i guess the answer is false


Related Questions

You are testing a new car using crash test dummies. Consider two ways to slow the car from 90 km/h (56 mi/h) to a complete stop:
i) You let the car slam into a wall, bringing it to a sudden stop.
ii) You let the car plow into a giant tub of gelatin so that it comes to a gradual halt.
In which case is there a greater impulse of the net force on the car?
(Prove and select below.)
a) in case (i).
b) in case (ii).
c) The impulse is the same in both cases.
d) The impulse of the first case > the impulse of the second case.
e) The impulse of the first case < the impulse of the second case.

Answers

Answer:

c) The impulse is the same in both cases.

Explanation:

What drives the car is the amount of movement of the car during its journey. In this case, we can consider that in the car, presented in the question above, the movement is generated through speed and friction on the track, the impact that makes the car stop, is not part of the movement and therefore, not part of the impulse. In the two situations presented, the speed of the car is the same, the same car and the same track were also used, which shows us that the impulse, in both situations, is the same.

Which two chemical equations show double-replacement reactions?
A. C+02 - CO2
B. 2Li + CaCl2 - 2LiCl + Ca
I C. Ca(OH)2 + H2S04 - CaSO4 + 2H20
D. Na2CO3 + H2S - H2CO3 + Na2S

Answers

The two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.

What is double replacement reaction?

A double replacement reaction have two ionic compounds that are exchanging anions or cations.

From the given options, we can choose the following based on their exchange of anions or cations.

Ca(OH)2 + H2S04 - CaSO4 + 2H20Na2CO3 + H2S - H2CO3 + Na2S

Thus, the two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.

Learn more about double replacement reaction here: https://brainly.com/question/14281077

#SPJ2

Credit-Card Magnetic Strips Experiments carried out on the television show Mythbusters determined that a magnetic field of 1000 gauss is needed to corrupt the information on a credit card's magnetic strip. (They also busted the myth that a credit card can be demagnetized by an electric eel or an eelskin wallet.) Suppose a long, straight wire carries a current of 7.0A . How close can a credit card be held to this wire without damaging its magnetic strip?

Answers

Answer:

14 μm

Explanation:

The magnetic field due to a long straight wire is B = μ₀i/2πr where  μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, i = current = 7.0 A and r = distance of credit card from magnetic field.

So r = μ₀i/2πB since B = 1000 gauss = 1000 G × 1 T/10000 G  = 0.1 T

r = 4π × 10⁻⁷ H/m × 7.0 A/(2π × 0.1 T)

r = 2 × 10⁻⁷ H/m × 7.0 A/0.1 T

r = 14 × 10⁻⁷ H/m × A/0.1 T

r = 140 × 10⁻⁷ m

r = 1.4 × 10⁻⁵ m

r = 14 × 10⁻⁶ m

r = 14 μm

Two protons move with uniform circular motion in the presence of uniform magnetic fields. Proton one moves twice as fast as proton two. The magnitude of the magnetic field in which proton one is immersed is twice the magnitude of the magnetic field in which proton two is immersed. The radius of the circle around which proton one moves is r. What is the radius of the circle around which proton two moves

Answers

Answer:

r₂ = 4 r

Explanation:

For this exercise let's use Newton's second law with the magnetic force

          F = q v x B

bold letters indicate vectors, the magnitude of this expression is

          F = q v B sin θ  

in this case we assume that the angle is 90º between the speed and the magnetic field.

If we use the rule of the right hand with the positive charge, the thumb in the direction of the speed, the fingers extended in the direction of the magnetic field, the palm points in the direction of the force, which is towards the center of the circle, therefore the force is radial and the acceleration is centripetal

           a = v² / r

let's use Newton's second law

           F = ma

           q v B = m v² / r

           r = [tex]\frac{qB}{mv}[/tex]

Let's apply this expression to our case.

Proton 1

             r = \frac{qB_1}{mv_1}

Proton 2

             r₂ = [tex]\frac{q \ B_2}{m \ v_2}[/tex]

in the exercise indicate some relationships between the two protons

*    v₁ = 2 v₂

    v₂ = v₁ / 2

*   B₂ = 2B₁

we substitute

           r₂ = [tex]\frac{q \ 2B_1}{m \ \frac{v_1}{2} }[/tex]

           r₂ = 4 [tex]\frac{qB_1}{mv_1}[/tex]

           r₂ = 4 r

The frequency and wavelength of EM waves can vary over a wide range of values. Scientists refer to the full range of frequencies that EM radiation can have as the electromagnetic spectrum. Electromagnetic waves are used extensively in modern wireless technology. Many devices are built to emit and/or receive EM waves at a very specific frequency, or within a narrow band of frequencies. Here are some examples followed by their frequencies of operation:__________.

Answers

Complete question is;

The frequency and wavelength of EM waves can vary over a wide range of values. Scientists refer to the full range of frequencies that EM radiation can have as the electromagnetic spectrum. Electromagnetic waves are used extensively in modern wireless technology. Many devices are built to emit and/or receive EM waves at a very specific frequency, or within a narrow band of frequencies. Here are some examples followed by their frequencies of operation:

garage door openers: 40.0 MHz

standard cordless phones: 40.0 to 50.0 MHz

baby monitors: 49.0 MHz

FM radio stations: 88.0 to 108 MHz

cell phones: 800 to 900 MHz

Global Positioning System: 1227 to 1575 MHz

microwave ovens: 2450 MHz

wireless internet technology: 2.4 to 2.6 GHz

Which of the following statements correctly describe the various applications listed above? Check all that apply.

a.) All these technologies use radio waves, including low-frequency microwaves.

b.) All these technologies use radio waves, including high-frequency microwaves.

c.) All these technologies use a combination of infrared waves and high-frequency microwaves.

d.) Microwave ovens emit in the same frequency band as some wireless Internet devices.

e.) The radiation emitted by wireless Internet devices has the shortest wavelength of all the technologies listed above.

f.) All these technologies emit waves with a wavelength in the range of 0.10 to 10.0 m.

g.) All the technologies emit waves with a wavelength in the range of 0.01 to 10.0 km.

Answer:

B, D, E, F are the correct statements.

Explanation:

Looking at the options;

A) This is true because radio waves are electromagnetic radiation being used today in television, mobile phones, radios and other areas of communication technologies. And the examples given to us fall in the category of technologies that use radio waves.

B) microwaves usually have long wavelengths and low frequencies. However, sometimes they could have high frequencies usually more than radio waves. Thus, this option is correct.

C) This option is wrong because it's not all the listed technologies that use combination of infrared waves and high-frequency microwaves.

D) we are given the frequency of microwave ovens as 2450 MHz.

Converting to GHz gives; 2.45 GHz.

We are told that wireless internet technology has frequency between 2.4 to 2.6 GHz. Thus, microwave frequency falls in the same range as wireless internet technology and thus the statement is true.

E) we know that wavelength is inversely proportional to frequency. This means that the higher the frequency, the shorter the wavelength.

In the frequencies given to us, wireless internet technology have the highest frequency which means they have the shortest wavelength. The statement is true.

F) from the frequencies given to us, the smallest is garage door openers = 40.0 MHz = 40 × 10^(6) Hz while the biggest is 2.6 GHz = 2.6 × 10^(9) Hz

Formula for wavelength is;

Wavelength = speed of light/frequency

Speed of light = 3 × 10^(8) m/s

Thus;

Wavelength = (3 × 10^(8))/(40 × 10^(6))

Or wavelength = (3 × 10^(8))/(2.6 × 10^(9))

So,wavelength = 7.5 m or 0.12 m

This falls into the given range of 0.10 to 10.0 m.

Thus, the statement is true.

In an experiment, a disk is set into motion such that it rotates with a constant angular speed. As the disk spins, a small sphere of clay is dropped onto the disk, and the sphere sticks to the disk. All frictional forces are negligible. What would happened to the angular momentum and the total kinetic energy of the disk-sphere system immediately before and after the collision?

Answers

Answer:

  L₀ = L_f ,  K_f < K₀

Explanation:

For this exercise we start as the angular momentum, with the friction force they are negligible and if we define the system as formed by the disk and the clay sphere, the forces during the collision are internal and therefore the angular momentum is conserved.

This means that the angular momentum before and after the collision changes.

Initial instant. Before the crash

        L₀ = I₀ w₀

Final moment. Right after the crash

        L_f = (I₀ + mr²) w

we treat the clay sphere as a point particle

how the angular momentum is conserved

       L₀ = L_f

       I₀ w₀ = (I₀ + mr²) w

       w = [tex]\frac{I_o}{I_o + m r^2}[/tex]   w₀

having the angular velocities we can calculate the kinetic energy

       

starting point. Before the crash

        K₀ = ½ I₀ w₀²

final point. After the crash

        K_f = ½ (I₀ + mr²) w²

sustitute

        K_f = ½ (I₀ + mr²)  ( [tex]\frac{I_o}{I_o + m r^2}[/tex]   w₀)²

        Kf = ½  [tex]\frac{I_o^2}{ I_o + m r^2}[/tex]   w₀²

we look for the relationship between the kinetic energy

        [tex]\frac{K_f}{K_o}[/tex]=   [tex]\frac{I_o}{I_o + m r^2}[/tex]

       [tex]\frac{K_f}{K_o } < 1[/tex]

      K_f < K₀          

we see that the kinetic energy is not constant in the process, this implies that part of the energy is transformed into potential energy during the collision


Please help I will mark you brainliest

Answers

I believe the answer is a

The correct answer is D, that is the point of the lowest elevation on the map.

What fuel does a main-sequence star use for nuclear fusion?
oxygen (0)
petroleum
helium (He)
hydrogen (H)

Answers

Answer:

A main sequence star is powered by fusion of hydrogen into helium in its core

Explanation:

A +3.4 x 10-6 C test charge experiences forces from two other nearby charges: a 3 N force due east and a 15 N force due west. What are the magnitude and direction of the electric field st the location of the test charge?

Answers

Answer:

3.53×10⁶ N/c due west

Explanation:

From the question

E = F'/q........................ Equation 1

Where E =  Electric Field, F = Net Force, q = Charge.

But,

F' = F₂-F₁...................... Equation 2

Substitute equation 2 into equation 1

E = (F₂-F₁)/q................ Equation 3

Given: F₁ = 3 N due east, F₂ = 15 N due west,  q = 3.4×10⁻⁶ C

Substitute these values into equation 1

E = (15-3)/(3.4×10⁻⁶)

E = 12/(3.4×10⁻⁶)

E = 3.53×10⁶ N/c due west

A go-cart is traveling at a rate of 25 m/sec for 20 seconds. How far will the go cart travel?

Answers

Answer:

Distance travel by go-cart = 500 meter

Explanation:

Given:

Speed of go cart = 25 m/s

Time travel = 20 seconds

Find:

Distance travel by go-cart

Computation:

Distance = Speed x time

Distance travel by go-cart = Speed of go cart x Time travel

Distance travel by go-cart = 25 x 20

Distance travel by go-cart = 500 meter

describe what will happen to our sun in the future

Answers

Answer: After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen.

Answer: the Sun will begin to collapse

Explanation: "After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen."

a Ferris wheel with a diameter of 35 m starts from rest and achieves its maximum operational tangential speed of 2.3 m/s in a time of 15 s. what is the magnitude of the wheels angular acceleration?
b. what is the magnitude of the tangential acceleration after the maximum operational speed is reached?​

Answers

final angular speed
ω = v / r = 2.20m/s / ½*35.0m = 0.126 rad/s
and so prior to reaching that final speed
the angular acceleration
α = Δω / Δt = 0.126rad/s / 15.0s = 0.00838 rad/s² ◄
and the tangential acceleration
a = Δv / Δt = 2.20m/s / 15.0s = 0.147 m/s² ◄
OR
a = αr = 0.00838rad/s² * ½*35.0m = 0.147 m/s² ◄

(a) The magnitude of the wheels angular acceleration is 0.0088 rad/s².

(b) The magnitude of the tangential acceleration after the maximum operational speed is reached is 0.153 m/s².

Angular acceleration of the wheel

The angular acceleration of the wheel is calculated as follows;

α = ω/t

ω = v/r

α = v/(rt)

α = (2.3)/(17.5 x 15)

α = 0.0088 rad/s²

Tangential acceleration of the wheel

a = v/t

a = (2.3)/15

a = 0.153 m/s²

Learn more about angular acceleration here: https://brainly.com/question/25129606

#SPJ6

What happens to a light wave that is absorbed by matter

Answers

Answer:

In absorption, the frequency of the incoming light wave is at or near the energy levels of the electrons in the matter. The electrons will absorb the energy of the light wave and change their energy state.

Explanation:

You are at a train yard observing trains (because why not). You see a train car (let's call it car 1) moving to the right ( x direction) towards a stationary train car (let's call this one car 2). Car 1 has an initial velocity of 15.0 m/s. A helpful train employee tells you that Car 1 also has a mass of 1,825 kg and Car 2 has a mass of 2,645 kg. Car 1 gently collides with Car 2, allowing them to connect. After the collision the two train cars stay connected. You can assume that there is no friction in the system. If you have never see train cars connect, you can watch the first 25ish seconds of this video to see two train cars couple. However, these cars have friction, so they stop - unlike our problem. What is the Final Velocity of the system consisting of Car 1 and Car 2

Answers

Answer:

6.12 m/s

Explanation:

Using the law of conservation of momentum

momentum before collision = momentum after collision

m₁v₁ + m₂v₂ = (m₁ + m₂)V    (since the train cars become attached to each other) where m₁ = mass of car 1 = 1,825 kg, m₂ = mass of car 2 = 2,645 kg, v₁ = initial velocity of car 1 = + 15.0 m/s (positive since it is moving in the positive x direction), v₂ = initial velocity of car 2 = 0 m/s (since it is initially stationary) and V = velocity of both cars after collision,

So, m₁v₁ + m₂v₂ = (m₁ + m₂)V  

m₁v₁ + m₂(0 m/s) = (m₁ + m₂)V  

m₁v₁ + 0 = (m₁ + m₂)V  

V = m₁v₁/(m₁ + m₂)

substituting the values of the other variables into the equation, we have

V = 1,825 kg × 15.0 m/s/(1,825 kg + 2,645 kg)

V = 27375 kgm/s/ 4470kg

V = 6.124 m/s

V ≅ 6.12 m/s

should scientist be allowed to do anything that they can?​

Answers

No, because some scientist are bad and they must have a scientific attitude like honesty, curiosity, open-mindedness, optimistic and more. And they should follow others sometimes because for their own good.

Answer:

No

Explanation:

Science operates in the context of national and international laws, agreements and conventions. It requires scientists to conduct and communicate scientific work for the benefit of society, with excellence, integrity, respect, fairness, trustworthiness, clarity, and transparency.

PLEASE HELP

the graph shows a plot of an objects velocity versus time for 15 seconds. is the acceleration of the object constant or changing? how do you know? what does this tell you about the net force on the object?

Answers

Answer:

It cannot be constant because if it does not change and each time it increases its strength and speed.

Explanation:

A car braked with a constant deceleration of 36 ft/s2, producing skid marks measuring 50 ft before coming to a stop. How fast was the car traveling when the brakes were first applied

Answers

Answer:

Initial velocity u = 60 ft/s

Explanation:

Given:

Deceleration a = -36 ft/s²

Distance covered s =50ft

Final  velocity v = 0 ft/s

Find:

Initial velocity u

Computation:

Using third equation of motion;

v² = u² + 2as

0² = u² + 2(-36)(50)

0 = u² - 3600

u² = 3600

u = 60 ft/s

Initial velocity u = 60 ft/s

What is the definition of the half-life of a radioactive isotope?
answer: The time it takes for half the parent nuclei in a sample to become daughter nuclei.

Answers

Answer: The half-life is the amount of time it takes for a given isotope to lose half of its radioactivity. If a radioisotope has a half-life of 14 days, half of its atoms will have decayed within 14 days. In 14 more days, half of that remaining half will decay, and so on.

How many excess electrons must be distributed uniformly within the volume of an isolated plastic sphere 30.0 cmcm in diameter to produce an electric field of 1440 N/CN/C just outside the surface of the sphere

Answers

Answer:

1.78×10×10^10 electron

Explanation:

Electric field outside the sphere can be calculated using below expression

E= kq/ r^2..........eqn(1)

Where k= 9 × 10^9 NM^2/C^2

q= charge

E= 1440 N/C

Diameter= 30.0 cm= 0.3 m

r= radius= 0.3/2= 0.15m

If we make q subject of formula from eqn(1) we have

q= Er^2/k............eqn(2)

q= 1440 × (0.15)^2 /(9 × 10^9 )

= 2.85×10^-9C

Total charge is an integer of electron charge , then we can calculate the number of the electron using the expression below

q= Ne

Where

N = number of electron

Making N subject of the formula we have

N= q/e

Where e= electron value= 1.6× 10^-19

N=2.85×10^-9 /1.6× 10^-19

= 1.78×10×10^10 electron

Only one setup below will light the bulb. Which setup will light the bulb?

Answers

Answer:

A. it's got everything set.... correct connection

The setup that will light the bulb in the given different circuit diagram is circuit A, because it is the only circuit is that is closed.

What is a closed circuit?

A complete circuit or closed circuit is the circuit that will allow the flow of electric current through it.

When a circuit is closed or complete, the connection of the different components of the circuit is complete.

From the image given, only option A has complete connection of different components of the circuit.

Thus, the setup that will light the bulb in the given different circuit diagram is circuit A, because it is the only circuit is that is closed.

Learn more about closed circuit here: https://brainly.com/question/17707076

A 45 kg object is lifted vertically at a constant speed to a height of 9.0 m by a 7.5x10² w electric motor. If this motor is 25% efficient in converting electric energy to mechanical energy, how long does the motor take to lift the object?​

Answers

Answer:

the time taken for the motor to lift the object is 21.17 s.

Explanation:

Given;

mass of the object, m = 45 kg

height through which the object was lifted, h = 9.0 m

electrical power used by the motor, P = 750 W

Efficiency of the electrical motor, n = 25% = 0.25

The electrical energy used by the motor in lifting the object is calculated as;

E = P x t

where;

t is the time taken for the motor to lift the object

E = 750 x t

E = 750t

The electrical energy converted by the motor to mechanical energy is calculated as;

P.E = 0.25(750t)

P.E = 187.5t

Recall, P.E = mgh

mgh = 187.5t

45 x 9.8 x 9 = 187.5t

3969 = 187.5t

t = 3969/187.5

t = 21.17 s

Therefore, the time taken for the motor to lift the object is 21.17 s.

An electron is confined in the 1s state of Hydrogen atom. Find ∆. Given that
∆ = ( in pic )
Help me pls!

Answers

The electron's distance from the nucleus in the 1s state of a hydrogen atom is A = [(r * (a^3 / 4√π) * ∫ e^(-2r/a) dr) - (a^3 / 4√π) * (∫ e^(-2r/a) dr)^2] from 0 to ∞ = [(r * (a^3 / 4√π) * (a/2)) - (a^3 / 4√π) * (a/2)^2].

To find the expectation value of the electron's distance from the nucleus in the 1s state of a hydrogen atom, we need to calculate the quantity Ar, where A is given by:

A = ⟨r⟩ = ∫ r * ψ(1s) * r^2 dr from 0 to ∞

First, let's express ψ(1s) in terms of the radial wavefunction R(r):

ψ(1s) = R(r) * Y(0,0)  [Since the 1s state has azimuthal quantum number l = 0 and magnetic quantum number m = 0]

The radial wavefunction R(r) for the 1s state is given by:

R(r) = (1 / √π * a^(3/2)) * e^(-r/a)

Now, let's calculate A:

A = ∫ r * ψ(1s) * r^2 dr from 0 to ∞

 = ∫ r * (1 / √π * a^(3/2)) * e^(-r/a) * r^2 dr from 0 to ∞

We can use integration by parts to simplify this integral. Let's define u = r and dv = (1 / √π * a^(3/2)) * e^(-r/a) * r^2 dr.

Taking the differentials, we have du = dr and v = ∫ (1 / √π * a^(3/2)) * e^(-r/a) * r^2 dr.

Integrating v, we can use the given integrals:

v = ∫ (1 / √π * a^(3/2)) * e^(-r/a) * r^2 dr

 = (a^3 / 4√π) * ∫ e^(-2r/a) dr  [Using the given integral]

Now, applying integration by parts:

∫ u dv = uv - ∫ v du

∫ r * (1 / √π * a^(3/2)) * e^(-r/a) * r^2 dr

= (r * v) - ∫ v du

= (r * (a^3 / 4√π) * ∫ e^(-2r/a) dr) - ∫ [(a^3 / 4√π) * ∫ e^(-2r/a) dr] dr

Simplifying the expression:

A = [(r * (a^3 / 4√π) * ∫ e^(-2r/a) dr) - (a^3 / 4√π) * ∫ ∫ e^(-2r/a) dr dr] from 0 to ∞

The integral ∫ ∫ e^(-2r/a) dr dr can be expressed in terms of the given integrals:

∫ ∫ e^(-2r/a) dr dr = (∫ e^(-2r/a) dr)^2

                     = (a/2)^2   [Using the given integral]

Now, substituting the values and evaluating the limits:

A = [(r * (a^3 / 4√π) * ∫ e^(-2r/a) dr) - (a^3 / 4√π) * (∫ e^(-2r/a) dr)^2] from 0 to ∞

 = [(r * (a^3 / 4√π) * (a/2)) - (a^3 / 4√π) * (a/2)^2]

For more such questions on nucleus,click on

https://brainly.com/question/12602839

#SPJ8

[tex]\\ x^{2} \int\limits^a_b {x} \, dx \int\limits^a_b {x} \, dx \neq \pi \pi \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right] \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right] \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right][/tex]

Answers

Answer:

I think you have a problem trying to write the question down, can you re write it because it seems glitched.

Explanation:

What is the term used to describe the
force pushing on an area or surface?
A. density
B. pressure
C. surface tension
D. volume

Answers

Answer: B. pressure
Explanation: The force pushing on a surface divided by the area of that surface is called pressure

An electron is travelling in the positive x direction. A uniform electric field is in the negative y direction. If a uniform magnetic field with the appropriate magnitude and direction also exists in the region, the total force on the electron will be zero. The appropriate direction for the magnetic field is:Group of answer choicesthe negative y directioninto the pageout of the pagethe negative x directionthe positive y direction

Answers

Answer:

into the page

Explanation:

Since the uniform electric field is in the negative y direction so its is -E and the electron is travelling in the positive x direction, it experiences an electric force F = -e × -E = + eE, so the electric force is in the positive y direction. Now since the net force on the electron is zero in the region of the magnetic field, it follows that the direction of the magnetic force is opposite to that of the electric force. Since the electric force is in the positive y direction, the magnetic force is in the negative y direction.

By the right hand rule, since the magnetic force is in the negative y direction and the electron moves in the positive x direction, it follows that the magnetic field is in the positive z direction, into the page.

What is the reason that the moon looks dimmer before eclipse? Why does it take some time to be brighter again after eclipse?​

Answers

Answer:

Why does it take sometimes to be brighter again after eclipse? The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation:

Answer: The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation:

When a car makes a sharp left turn, what causes the passengers to move toward the right side of the car? *

A centrifugal force
B inertia
C centripetal acceleration
D centripetal force

Answers

B, the body at rest becomes reluctant to start moving or a body in motion becomes

reluctant and stop moving once in motion in a straight line

Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flowmeters in which the magnetic field is produced by horizontal coils embedded in the bottom of the channel. A particular coil has 100 turns and a diameter of 6.0 m. When it's time for a measurement, a 4.5 A current is turned on. The large diameter of the coil means that the field in the water flowing directly above the center of the coil is approximately equal to the field in the center of the coil. The field is directed downward and the water is flowing east. The water is flowing above the center of the coil at 1.5 m/s

Required:
a. What is the magnitude of the field at the center of the coil?
b. What is the direction of the force on a positive ion in the water above the center of the coil?

Answers

Answer:

A) B = 9.425 × 10^(-5) T

B) North direction

Explanation:

A) We are given;

Current in coil; I = 4.5 A

Number of turns; N = 100 turns

Radius;R = diameter/2 = 6/2 = 3 m

Formula for the magnetic field at the center of the coil is given by;

B = (μ_o•N•I)/2R

Where μ_o is a constant = 4π × 10^(-7) H/m

Thus;

B = (4π × 10^(-7) × 100 × 4.5)/(2 × 3)

B = 9.425 × 10^(-5) T

B) The direction of the force on a positive ion in water can be gotten by the application of flemmings right hand rule.

From flemmings right hand rule, we know that;

- The thumb indicates the direction of the motion of the force which is in the north direction.

- The Index finger indicates the direction of the magnetic field which is in the east direction

- The middle finger indicates the direction of magnetic field which is downwards in the west direction.

Therefore, the direction of the force as seen from flemmings right hand rule is in the north direction

A rifle can shoot a 4.00 g bullet at a speed of 998 m/s. Find the kinetic energy of the bullet. What work is done on the bullet if it starts from rest?​

Answers

Answer:

1992.008J

Explanation:

Explain why it is not advisable to be in a garage when the car engine is being
heated.​

Answers

Answer:

You can breathe in too much carbon monoxide, which will eliminate the flow of oxygen to your bloodstream and can kill you.

Explanation:

It’s a highly toxic gas produced when fuels burn incompletely. The typical internal combustion engine used in most cars and trucks, can produce extremely high concentrations of carbon monoxide.
Other Questions
HELP PLEASE whats the answer!?!? PLEASE HELP, ILL GIVE YOU A BRAINLY OR WHATEVER ITS CALLED!!! Why would two parents with dominant traits be able to pass down recessive traits, but two parents with recessive traits cannot pass down dominant traits? (explain your answer with a few sentences) I NEED HELP FAST PLEASE! Find the measure of the missing angles. Advantage of using paired samples William S. Gosset was employed by the Guinness brewing company of Dublin. Sample sizes available for experimentation in brewing were necessarily small, and new techniques for handling the resulting data were needed. Gosset consulted Karl Pearson (1857-1936) of University College in London, who told him that the current state of knowledge was unsatisfactory. Gosset undertook a course of study under Pearson and the outcome of his study was a famous paper published in statistical literature, "The Probable Error of a Mean" (1908), which introduced the t- distribution. Since Gosset was contractually bound by Guinness, he published under a pseudonym, "Student"; hence, the t distribution is often referred to as 'Student's t distribution.' As an example, to illustrate his analysis, Gosset reported in his paper on the results of seeding 11 different plots of land with two different seed types: regular and kiln-dried. There is reason to believe that drying seeds before planting will increase plant yield. Since different plots of soil may be naturally more fertile, a matched pairs design was used by planting both types of seeds in all 11 plots. The resulting data (corn yield in pounds per acre) are in the submodule in Canvas. Open the 'seeds' dataset in Minitab. We will use this data to test if there is a difference in the yield based on seed type. Exploratory Data Analysis Visually, consider the two variables 'Regular seed' and 'Kiln_dried_seed.' Create a graph that displays a boxplot for each variable. Graph > Boxplot > Multiple Y Variables > With Categorical Variables > Select variables. 1. What do you observe? What are the shapes of the distributions? Is there an obvious difference in the centers of the distributions? Note: we can use the t distribution to make inferences because the graphs show no clear skewness or outliers Analysis This is paired data since both types of seed were planted in each plot, so the yields of each seed type in the plot are paired. The unit/case is the plot. What happens when we build a confidence interval for the difference in means without taking the pairing into account. 2. Use Minitab to build the 95% confidence interval: Stat > Basic Statistics > 2-sample t> Select 'Each sample is in its own column' from the drop-down menu. Sample 1: 'Regular_seed' and Sample 2: 'Kiln_dried_seed' What is the 95% confidence interval for 12 ? 3. With the corresponding two-sided test, what is the p-value and generic conclusion? Note: Remember that an advantage of using a paired means approach is the ability to reduce unwanted variation and focus on the variation of interest. 4. Create dotplots of Samples: 'Regular_seed', 'Kiln_dried_seed', and the "Differences" Graph > Dotplot > Multiple Y Variables > enter all 3 variables Compare the three dotplots that you created. Do the sample of differences seem to have more, less, or about the same variation that is found with the two individual samples? 5. Use Minitab to find the summary statistics for all three variables: Stat > Basic Statistics > Display Descriptive Statistics [select all 3 variables] Complete the table below with the standard deviation: What do you notice about the standard deviation of the differences? 6. Calculate the 95% confidence interval for d : Stat > Basic Statistics > Paired t> Sample 1: 'Regular_seed' and Sample 2: 'Kiln_dried_seed' xd= Ibs/acre 95% confidence interval for d : 7. Compare the confidence interval for d in part 6 with the confidence interval that you found for 12 in part 2 . What is the most salient difference between the two intervals? 8. What is the p-value and generic conclusion for the corresponding two-sided hypothesis test with d ? 9. Compare the p-values from the two tests. What have you learned about the advantage of using a paired design when your data is matched pairs? 6)which types of telescopes will be able to detect flux from objects if the telescopes are located on earth? use figure 5.6 for guidance. bold the correct answers. Temperature is the measure of the average kinetic energy of the particles in an object. True False After a 6-mg injection of dye into a heart, the readings of dye concentration at two-second intervals are as shown in the table. Use Simpson's Rule to estimate the cardiac output.tc(t)tc(t)00144.721.9163.343.3182.165.1201.187.6220.5107.1240125.8 How were enslaved people who worked as servants in homes different from those who worked in the fields Can someone please help me 1. Compare and contrast the requirements laid down by Circular Letter No 34 s 1929 based on the Service Manual published by the Philippine Bureau of Public Schools with RA 7079. (1 paragraph with 5 sentences) 2. Identify 3 limitations of RA 7079 in terms of implementation, scope or protection of campus journalists. What will be your proposed amendments to the RA to address these limitations? Make sure to support your answers with relevant information. (1 paragraph with 5 sentences) 3. Specify one (1) teaching method that you think will work best when it comes to teaching the history of journalism at the high school level. Make sure to support your answers with relevant information. (1 paragraph with 5 sentences) describe atmospheric pressure and water pressure Fran has a box of candy. There are 5 pieces of lemon-flavored candy, 3 pieces of orange-flavored candy, and 4 pieces of grape-flavored candy in the box. Fran will randomly select 1 piece of candy from the box. What is the probability that the piece of candy will NOT be lemon flavored? A. 7/12B. 5/12C. 5/7D. 2/3 Whats the work and answer for this? Someone please tell me 100 PONTS AND BRAINIEST FOR BEST CORRECT ANSWER The majority of federal civil servants are hired by:A) selecting job applicants from those with the highest scored on test.B) selecting job applicants from Senate confirmation hearings.C) selecting job applicants from congressional committees.D) selecting job applicants from presidential recommendations. help this is math will mark brainlisttt there are 45 runners in a race. how many ways can the runners finish first, second, and third? The Net Asset Value (NAV) of a stock mutual fund is a) the price per share of the fund b) the value of all assets sold by the fund in a given month c) the highest market value of the fund during the trading day d) the lowest market value of the fund during the trading day The volume of the tissue box is 468 units. If the area of the base is 156 units, find its height. PLS HELP DUE TODAY 13. The total cost of 3 equally-priced baseball caps is $48. Howmuch does a customer save by using a 15%-off coupon to buy4 baseball caps?A $21.60B $9.60C $7.20D $2.40 3. Pepsi puts 355 ml of soda in a can. How many drops is this?