The goal of Nozick's discussion of experience machines is c. to devise a thought experiment that elucidates what we value in life.
The Importance of Machines and Machine Making:
Man relies on machines for transportation, communication, and work, among other things. People with specialized knowledge in the application of scientific principles to problem solving design and develop machines.
Many of humanity's problems have been solved mechanically, chemically, and electronically by these engineers, scientists, and inventors. The benefits of the industrial revolution, such as unprecedented increases in agricultural outputs that have improved food security, are just a few of the positive wonders it has wrought.
They have also brought misery and oppression to many people through ingenious weapons of war, some of which have brought the world to its knees.
To know more about Machines, visit: https://brainly.com/question/25141510
#SPJ4
A solid shaft of 120 mm diameter is required to transmit 200 kW at 100r.p.m.
If the angle of twist is not to exceed 2°, find the length of the shaft. Take
modulus of rigidity for the shaft material as 90 GPa.
The required length of a shaft is approximately 2.96 meters.
To find the length of the shaft, you need to use the torsion formula, which is:
T = (Torque)/(pJ)
Where:
T is the angle of twist in radians
Torque is the applied torque
p is the radius of the shaft
J is the torsional stiffness of the shaft
To find the length of the shaft, you will need to rearrange the torsion formula to solve for L, the length of the shaft. The resulting equation will be:
L = (TpJ)/(Torque)
Plugging in the known values, we get:
L = (2° × 120 mm × 90 GPa) / (200 kW)
Converting the angle of twist to radians and the power to torque gives:
L = (0.0349 × 120 mm × 90 GPa) / (2777 Nm)
Solving this equation gives a shaft length of approximately 2.96 meters.
This is the minimum length of the shaft required to transmit the specified torque without exceeding the specified angle of twist.
To learn more about the torsion click here:
https://brainly.com/question/27375807
#SPJ1
Management information systems (MIS) for communication directly support organizational decision making by helping managers communicate, obtain, discuss, and understand the information necessary for strategic decisions. ensuring that managers' decisions and goals are communicated and understood by everyone within the organization. allowing all stakeholders to communicate their opinions and insights and participate in making strategic decisions. creating a record of the organization's past decisions and their outcomes, which managers can easily refer back to
Management information systems (MIS) directly assist corporate decision making -by helping managers communicate, obtain, discuss, and understand the information necessary for strategic decisions.
How do management information systems (MIS) function?
A collection of systems and processes known as a management information system (MIS) collect data from many sources, compile it, and present it in an usable fashion.
Managers create reports using a MIS to offer them a complete overview of all the data they need to make choices about everything from daily operations to top-level strategy.
Although the notion is older than contemporary computing technologies, today's management information systems heavily rely on technology to gather and show data.
Information Systems Types:
a. Transaction Processing Systems (TPS):
b. Management Information Systems (MIS)
c. Decision Support Systems (DSS)
To know more about management information systems, visit: https://brainly.com/question/12977871
#SPJ4
A piston having a cross sectional area of 0.07m is located in a cylinder containing water as shown in the Figure 1. An open U-tube manometer is connected to the cylinder as shown. For h1=60mm and h=100 mm, what is the value of the applied force, P, acting on the piston? The weight of the piston is negligible.
The value that applied force acting on the piston is 892.71 N.
How to calculate the applied force?[tex]p_1[/tex] = mercury density = 13600 kg/m^3
[tex]p_2[/tex] = water density = 1000 kg/m^3
h = height of mercury = 100 mm or 0.1 m
[tex]h_1[/tex] = height of water = 60 mm or 0.06m
A = piston area = 0.07m
First, we can calculate the total of pressure on the piston which is equal to pressure of mercury cylinder subtract the pressure of water cylinder.
ΔP = [tex]p_1[/tex]*g*h - [tex]p_2[/tex]*g*[tex]h_1[/tex]
= 13600*9.81*0.1 - 1000*9.81*0.06
= 12753
Then, we multiply the total pressure by area to calculate the force on the piston. So,
P = ΔP * A
= 12753 * 0.07
= 892.71 N
Thus, the force on piston is 892.71 N.
You question is incomplete, but most probably your full question was
(image attached)
Learn more about force here:
brainly.com/question/28012687
#SPJ4
Topping off a leaking A/C system is:
A) Prohibited by the Clean Air Act
B) Allowable everywhere in the U.S.
C) Allowable everywhere in the U.S., except where state or local laws prohibit it.
D) Prohibited in all urban areas
Topping off a leaking A/C system is Allowable everywhere in the U.S., except where state or local laws prohibit it. Thus, option C is correct.
What is law?Law is a set of rules created and enforced by social or governmental institutions to regulate behaviour, the precise definition of which has long been debated. It has been described as a science as well as an art form.
These laws serve as a guideline for acceptable behaviour and serve as a standard of conduct for citizens.
Therefore, option C is correct, that topping off a leaking A/C system is legal throughout the United States, except where state or local laws prohibit it.
Learn more about the law, refer to:
https://brainly.com/question/15400748
#SPJ4
Naturally found uranium consists of 99.274%, 238U, 0.720%235U, and 0.006% 233U (by mass). As we have seen, 235U is the isotope that can undergo a nuclear chain reaction. Most of the 235U used in the first atomic bomb was obtained by gaseous diffusion of uranium hexafluoride, UF6(g).
A.) What is the mass of UF6 in a 30.0-L vessel of UF6 at a pressure of 690 torr at 360 K?
B.) What is the mass of 235U in the sample described in part A? The atomic mass of uranium-235 is 235.044 u.
C.) Now suppose that the UF6 is diffused through a porous barrier and that the change in the ratio of 238U and 235U in the diffused gas can be described by the equation r1r2=urms1urms2=3RT/M13RT/M2ââââââââ=M2M1ââââ. What is the mass of 235U in a sample of the diffused gas analogous to that in part A?
D.) After one more cycle of gaseous diffusion, what is the percentageof 235UF6 in the sample? (In your calculations unrounded values from previous parts should be used.)
A. The mass of UF6 in a 30.0-L vessel of UF6 at a pressure of 690 torr at 360 K is 2298.4 g
B. The mass of 235U in the sample described in part A is 16.44 g
C. The mass of 235U in a sample of the diffused gas analogous to that in part A is 16.47 g.
D. The percentage of 235UF6 in the sample is 0.7179%
How do we arrive at the values given above?The values of the equations or problems given above are determined as follows:
A) To find the mass of UF6 in the 30.0 L vessel at a pressure of 690 torr and a temperature of 360 K, we need to use the ideal gas law:
PV = nRT
Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
We can rearrange the equation to solve for n:
n = PV/RT
Plugging in the values, we get:
n = (690 torr)(30.0 L)/(8.31 J/mol*K)(360 K)
= 6.52 moles of UF6
To find the mass of UF6, we can multiply the number of moles by the molar mass of UF6, which is 352.0 g/mol:
mass = n * molar mass
= 6.52 moles * 352.0 g/mol
= 2298.4 g
B) To find the mass of 235U in the sample, we first need to calculate the mass of UF6 in the sample that is made up of 235U. We know that naturally occurring uranium consists of 99.274% 238U, 0.720% 235U, and 0.006% 233U by mass. Since the mass of the UF6 in the sample is 2298.4 g, the mass of 235U in the sample is (0.720%)(2298.4 g) = 16.44 g.
C) To find the mass of 235U in the diffused gas, we can use the equation provided:
r1r2 = urms1urms2 = (3RT/M1)(3RT/M2) = M2/M1
Where r1 and r2 are the ratios of 238U and 235U in the initial and final samples, respectively, and M1 and M2 are the molar masses of 238U and 235U, respectively.
We can rearrange the equation to solve for r2:
r2 = r1 * M2/M1
Plugging in the values, we get:
r2 = (16.44 g/2298.4 g) * (235.044 g/mol) / (238.05 g/mol)
= 0.7202
This means that the diffused gas has a ratio of 0.7202 235U to 238U. Since the mass of the UF6 in the sample is 2298.4 g, the mass of 235U in the diffused gas is (0.7202)(2298.4 g) = 16.47 g.
D) After one more cycle of gaseous diffusion, the ratio of 235U to 238U in the sample will be the same as it was in the diffused gas after the first cycle, 0.7202. The mass of 235U in the sample will also be the same, 16.47 g. To find the percentage of 235UF6 in the sample, we can divide the mass of 235U by the total mass of the UF6 and multiply by 100:
percentage = (16.47 g / 2298.4 g) * 100%
= 0.7179%
Therefore, the correct answers are as given above
learn more about percentage of mass: https://brainly.com/question/26150306
#SPJ1
Bryden is a network analyst who has been recruited into Big Bay Burger's security management. Which of the following terminologies must he use to explain to the company's employees about the possibility of someone using a deception in following them into a restricted area?
1. Phishing
2. Baiting
3. Piggybacking
4. tailgating
The correct term to use in this situation is "tailgating." Tailgating refers to the act of someone following another person into a restricted area without proper authorization, often by piggybacking on the other person's access.
Tailgating, also known as "piggybacking," is a security breach that occurs when an unauthorized person follows an authorized person into a restricted area, such as a building or a secure computer network. This can be done physically, by following someone through a door or gate, or digitally, by using someone else's login credentials to access a restricted system. This can be a security vulnerability, as it allows unauthorized individuals to enter secure areas without being detected. It is important for employees to be aware of this potential security risk and to take steps to prevent it, such as using proper authentication procedures and paying attention to their surroundings.
Learn more about tailgating, here https://brainly.com/question/2000011
#SPJ4
All of the following are true of spreadsheets EXCEPT O A cell content that is displayed is the result of a formula entered in that cell. O Line graphs, bar graphs, stacked bar graphs, and pie charts are typical graphs created from spreadsheets. O A cell reference is made by a numbered column and lettered row reference, O A cell may contain label, value, formula, or function.
The statement about spreadsheets that incorrect is a cell reference is made by a numbered column and lettered row reference.
What is cell reference?Cell reference or cell address is a address to specific cell in spreadsheets. Cell reference is made by combining two axis reference which is called column and row.
Column reference in spreadsheets are by letter such as A, B, C, etc. Then, row reference in spreadsheets are by number such as 1, 2, 3, etc.
Thus, the cell reference is made by lettered column and numbered row. So, the option of a cell reference is made by a numbered column and lettered row reference is false or incorrect.
Learn more about cell reference here:
brainly.com/question/14309859
#SPJ4
A dormitory at a large university, built 50 years ago, has exterior walls constructed of L5 = 25-mm-thick sheathing with a thermal conductivity of k3 = 0. 1 W/m. K. To reduce heat losses in the winter, the university decides to encapsulate the entire dormitory by applying an Li = 25-mm-thick layer of extruded insulation characterized by ki = 0. 029 W/m K to the exterior of the original sheathing. The extruded insulation is, in turn, covered with an Lg = 5-mm-thick architectural glass with kg = 1. 4 W/m. K. Determine the heat flux through the original and retrofitted walls when the interior and exterior air temperatures are Tinfity, i = 22 degree C and Tinfity, 0 = -20 degree C, respectively. The inner and outer convection heat transfer coefficients are hi = 5 W/m2 K and h0 = 25 W/m2 K. respectively.
The heat flow through the original wall is 627.7 W/m² and the heat flux through the retrofitted wall is 174.3 W/m². So the retrofitted wall has a significantly lower heat flux than the original wall, indicating that it is much more effective at preventing heat loss.
Heat energy is a form of energy that is associated with the motion of particles in a substance, such as the vibrations of atoms and molecules. It is a form of thermal energy that is transferred between objects that are at different temperatures.
To determine the heat flux through the original and retrofitted walls, we can use the equation for heat flux through a multi-layer composite wall, which is:
Q = [tex](T_i - T_o) / (\frac{1}{h_i} + \frac{L_i}{k_i} + \frac{Lg}{k_g} + \frac{Lo}{k_o} + \frac{1}{h_o} )[/tex]
Where:
T = the interior and exterior air temperatures, respectively
[tex]L_i, k_i, L_g, k_g, L_o,[/tex] and [tex]k_o[/tex] are the thickness, thermal conductivity, and convection heat transfer coefficient of each layer of the wall
[tex]h_i[/tex] and [tex]h_o[/tex] are the inner and outer convection heat transfer coefficients, respectively
we are informed that:
Li = 0 (interior air layer)
ki = 0 (interior air layer)
L1 = 25 mm
k1 = 0.1 W/m.K
L2 = 25 mm
k2 = 0.029 W/m.K
L3 = 5 mm
k3 = 1.4 W/m.K
Lo = 0 (exterior air layer)
ko = 0 (exterior air layer)
So the heat flux through the original wall is:
Qoriginal = (22 - (-20)) / (1/5 + (25/0.1) + 1/25) = 627.7 W/m²
And the heat flux through the retrofitted wall is:
Qretrofitted = (22 - (-20)) / (1/5 + (25/0.1) + (25/0.029) + (5/1.4) + 1/25) = 174.3 W/m²
Learn more about heat energy here, https://brainly.com/question/8206631
#SPJ4
a capacitor uses an _____ field to store potential electric energy which can be used as a power source when connected to a network. fill in the blank.
A capacitor uses an electric field to store potential electric energy which can be used as a power source when connected to a network.
What is a capacitor and how it works?
Unlike the battery, a capacitor is a circuit component that temporarily stores electrical energy by distributing charged particles on (generally two) plates to create a potential difference. A capacitor can take a shorter time than a battery to charge up and it can release all the energy very quickly.
What is the main function of a capacitor?
The primary use of a capacitor is to store electrostatic energy in an electric field and hence supply this energy whenever possible to the circuit.
How does a capacitor store energy?
A charged capacitor stores energy in the electrical field between its plates. As the capacitor is being charged, the electrical field builds up. When a charged capacitor is disconnected from a battery, its energy remains in the field in the space between its plates.
Thus, the electric field is the correct answer.
To know more about a capacitor:
https://brainly.com/question/21851402
#SPJ4
Q4 A heat engine has a heat input of 3 X 104 Btu/h and a thermal efficiency of 40 percent. Calculate the power it will produce, in hp. Source 3 x 10+ Btu/h 7th = 40% HE w ng Sink Q5 When a man returns to his well-sealed house on a summer day, he finds that the house is at 35°C. He turns on the air conditioner, which cools the entire house to 20°C in 30 min. If the COP of the air-conditioning system is 2.8, determine the power drawn by the air conditioner. Assume the entire mass within the house is equivalent to 800 kg of air for which c, = 0.72 kJ/kg-°C and c, = 1.0 kJ/kg.°C. W: 35°C 20°C A/C
The power drawn by the air conditioner is 1353.38 Watt
Power can be calculate as follows
T1: The home's initial temperature of 35 °C
T2 = 20°C, the house's final temperature
Δt =38 minutes, or 38 minutes x 60 seconds = 2280 s, are needed to cool the house.
800 kg is the mass of air in the home, or m.
0.72 kJ/kgK for Cv, specific heat at constant volume.
1.0 kJ/kgK for specific heat at constant pressure (Cp).
we can calculate the removing heat as follows:
q = mCvΔT
q = 800×720×(35-20) (35-20)
q = 8640000 J
Average removal rate of ears
Q= q/t
Q = 8640000/ 2280 = 3789.47 W
COP = Q/ W
W= Q/ COP
W= 3789.47/ 2.8
W = 1353.38
Learn more about power at https://brainly.com/question/24003945
#SPJ4
what is the cartesian representation of the number exp(-j90) (phase is given in degrees)? 1
-1
j
-j
0 1+j 1-j -1-j -1+j
The Cartesian representation of exp(-j90) is 0 - 1j
What is the cartesian representation of the number exp(-j90)?Generally, The Cartesian representation of a complex number is its real and imaginary parts. In this case, the number exp(-j90) is a complex number with a phase of -90 degrees, which can be represented as a rotation by -90 degrees in the complex plane.
To find the Cartesian representation of exp(-j90), we can use Euler's formula, which states that a complex number in polar form (r,θ) can be represented in Cartesian form (x,y) as follows:
x = r * cos(θ) y = r * sin(θ)
where r is the magnitude of the complex number and θ is its phase angle in radians.
In this case, the magnitude of exp(-j90) is 1, since it is a unit complex number (its magnitude is 1). The phase angle is -90 degrees, which is equal to -π/2 radians. Therefore, the Cartesian representation of exp(-j90) is:
x = 1 * cos(-π/2)
= 0
y = 1 * sin(-π/2)
= -1
So the Cartesian representation of exp(-j90) is 0 - 1j.
Read more about cartesian representation
https://brainly.com/question/29298525
#SPJ1
R = 4MN and C= 0.75μF.
v(0)
v¡(t) = −t²V for 0s ≤ t ≤ 5s. What is the value of v
at time t = 5s, if v (0)
5s, if = 0? You can assume the
operational amplifier behaves as an ideal op amp with
power supplies of +15V and −15V. Give your answer
in volts, and omit the units from your answer.
Answer:
45.9m
Explanation:
Given parameters:
Final velocity = 30m/s
Initial velocity = 0m/s
Unknown:
Height of fall = ?
Solution:
The motion equation to solve this problem is given below;
V² = U² + 2gH
V² = 0 + (2 x 9.8 x H)
Determine the maximum tensile and compressive bending stress in the beam if it is subjected to a moment of M=4 kip. ft
Maximum tensile to y bar is 3.40 in and I Na is 91.73 in4 whereas bending stress is 1.78 ksi.
When an object is subjected to an external load at any cross-section, it typically experiences bending stress. The relationship between the section's section modulus and bending moment is another definition for the bending stress. The equation calculates the bending stress for the rail. Tensile strength is the maximum load or stress that a material can withstand before stretching and breaking. Tensile stress and strain are the two components of tensile force, which is the stretching force acting on the material. This indicates that the force is seeking to stretch the material that is subject to it since it is under tension.
To learn more about Bending Stress click here
brainly.com/question/24227487
#SPJ4
Users regularly log on with a username and password. However, management wants to add a second authentication factor for any users who launch the gcga application. The method needs to be user-friendly and non-disruptive. Which of the following will BEST meet these requirements?An authentication applicationTPMHSMPush notifications
Push notifications would likely be the best option for adding a second authentication factor that is user-friendly and non-disruptive.
An authentication application, such as a token generator or authenticator app, could also be a good choice, as it would allow users to easily complete the second authentication step without having to remember additional passwords or codes.
TPM (Trusted Platform Module) and HSMs (Hardware Security Modules) are hardware-based security measures that can provide additional protection for sensitive data, but they may not be as user-friendly or non-disruptive as the other options.
It's worth considering the specific needs and requirements of your organization and the users in deciding which option to choose.
Learn more about authentication, here https://brainly.com/question/29752591
#SPJ4
find the type of elements and their impedance in ohms within each electrical box. (assume that all elements of a load are in series.)
The type of element is Resistor and inductor in series. While the impedance will be 1.08 + 0.72.
What is Resistor?
A passive electrical component with two terminals that is used in electrical circuits to limit or regulate the flow of electric current.
The main function of a resistor is to reduce current flow and voltage in a specific section of a circuit. It is made of copper wires coiled around a ceramic rod, and the resistor's outer surface is coated with insulating paint.
Ohm is the SI unit of resistor.
The two basic types of resistors are as follows:
Linear resistorNon-linear resistorTo know more about Resistor, visit: https://brainly.com/question/29006457
#SPJ4
describe the difference between lossy and lossless compression techniques and give an example of when each is most appropriate.
The difference between lossy and lossless compression techniques are:
Lossy compression is a method that reduces the size of a file by removing some of the data contained in it. This is done by identifying and removing redundant or unnecessary data, such as data that the human eye cannot perceive. Lossy compression is typically used for media files, such as images, audio, and video, and is often used in applications where the loss of some data is acceptable in exchange for a smaller file size. Examples of lossy compression include JPEG for images and MP3 for audio.Lossless compression, on the other hand, is a method that reduces the size of a file without removing any data. This is done by identifying and eliminating redundancy in the data, such as repeating patterns or sequences, and replacing them with a smaller representation. Lossless compression is typically used for files that cannot tolerate any loss of data, such as documents and other text-based files. Examples of lossless compression include ZIP and GZIP.Lossy and lossless are two types of data compression techniques that are used to reduce the size of a file or data stream. In general, lossy compression is most appropriate when the file size needs to be reduced as much as possible, even if it means sacrificing some data quality, while lossless compression is most appropriate when the file needs to be reduced in size without losing any data.
Learn more about lossy and losses, here https://brainly.com/question/13663721
#SPJ4
Ex-1: Using EFM to design the interior panel C of the flat plate floor shown in Figure
below. Assume fy = 414 MPa, fd = 25 MPa, LL =4.8 kN/m², DL = 1.0 kN/m² in
addition to self-weight of slab, floor height=3.66 m, C1 = C2 = 460mm, thickness of
the slab hf = 216 mm
Answer:
Explanation:
To answer your question, I will start by outlining the requirements needed to design the interior panel C of the flat plate floor using EFM. Firstly, we need to consider the fact that fy = 414 MPa, fd = 25 MPa, LL =4.8 kN/m² and DL = 1.0 kN/m² in addition to self-weight of slab and floor height=3.66 m. Also, C1 and C2 are 460 mm and thickness of the slab hf is 216 mm respectively.
After considering the given information, we can proceed with designing interior panel C by first finding out the ultimate moment capacity for this panel according to EFM guidelines. Using a combination of flexural strength equations and suitably selected material strength constants based on slab type, we can calculate this capacity. Then determination of reinforcement size along with other design criteria such as yield line analysis need to be calculated in order to ensure stability and durability of structure under all kinds of loads. This process needs to be repeated for each interior panel in order to complete their EFM design process accurately. EFM is a powerful tool that can help you design the interior panel C of the flat plate floor shown in Figure below. With EFM, you can determine the optimal dimensions and material properties for the panel, and you can also assess the structural performance of the panel under different loads and conditions.
TRUE/FALSE. a technician is using a network-attached desktop computer with a type 2 hypervisor to run two vms. one of the vms is infected with multiple worms and other forms of known malware. the second vm is a clean installation of windows. the technician has been tasked with logging the impact on the clean windows vm when the infected vm attempts to infiltrate the clean vm through the network.
This statement about networking is true.
What is network?A network is a system of interconnected components or entities that exchange data or information. It can refer to physical or virtual components, such as computers, wires, cables, and routers, or it can refer to the nodes and edges of a graph. Networking is the process of creating and maintaining connections between entities, which can be used to share resources and information. Networks can be used to connect computers to each other in a local area network (LAN) or to connect computers in different locations over the internet. Networks can also be used to connect people and organizations, or to provide services like email, video streaming, and telecommunication.
To know more about network click-
https://brainly.com/question/28041042
#SPJ4
In which situations is NoSQL better than relational databases such as SQL? What are specific examples of apps where switching to NoSQL yielded considerable advantages?
NoSQL databases, like denormalized relational databases, optimize for specific queries in your application. In other words, you know what queries you want to optimize for, so you choose a NoSQL product and a data design to support the queries you'll run.
Explanation in Detail:
I believe NoSQL is a meaningless term. Because it is perfectly possible to have relational databases that do not use SQL and vice versa, the concept should probably be called Not-Only-Relational (in theory at least).
A normalized relational database, on the other hand, is intended to store data with the fewest data anomalies and to maximize data integrity. This is obviously a good goal, but it is diametrically opposed to performance, which is what most people care about.
So, in my opinion, a NoSQL database is best if you want to optimize for specific queries in a specific application. If you want a database that is safe for your data and supports the widest range of queries against that data (for example, if you don't know what queries your app will need to run), a SQL database is the best choice.
To know more about NoSQL databases, visit: https://brainly.com/question/29835951
#SPJ4
The following problem has several moving parts. Although it's a multiple choice question, we recommend reading the code carefully and coming to an understanding of what it does. 1| def main(): 2| counter = Counter() 3| num = 0 4| for x in range(0, 100): 5| incrementor(counter, num) 6| return (counter.count, num) 7| 8| def incrementor(c, num): 9| c.count = c.count + 1 10| num = num + 1 11| 12| class Counter: 13| def __init__(self): 14| self.count = 0 15| 16| a_tuple = main() What is stored in a_tuple after the above code is run?(0, 100) (100, 0) (100, 100) (0,0) Nothing; an error occurs before the code can end on its own.
(100, 0) is stored in a_tuple after the above code is run.
What is code?The language that a computer can understand is generally referred to as code. Natural language cannot be understood by computers. As a result, the computer must translate human language into a set of "words" it can comprehend.
The words that, when used in a program, start a standard action are known as keywords. Syntax is the set of keywords that must be present for a computation to be successfully performed. A programming language is made up of a set of keywords and syntax.
The word "code" by itself is so vague that it doesn't convey much. Consideration of code as instructions as opposed to data can be helpful. This means that computer code takes data as an input, processes it, and then outputs the result.
Learn more about code
https://brainly.com/question/26134656
#SPJ4
adjust your program from exercise 2 so that only lower case letters are allowed for valid passwords.
To adjust your program from exercise 2 so that only lower case letters are allowed for valid passwords, check the code given below.
What is program?A programme is a set of instructions that a computer uses to carry out a particular task. A programme is like the instructions for a computer, to use an analogy. It includes a list of components (called variables, which can stand for text, images, or numeric data) and a list of instructions (called statements), which instruct the computer how to carry out a particular task.
Specific programming languages like C++, Python, and Ruby are used to create programmes. These high level programming languages are writable and human-readable. Compilers, interpreters, and assemblers inside the computer system then translate these languages into low level machine languages.
//CODE//
/*Exercise 2: Adjust your program from Exercise 1 so that only
lower case letters are allowed for valid passwords.*/
#include <iostream>
#include <string>
#include <cctype>
#include <cstring>
using namespace std;
//function prototypes
bool testPassWord(char[]);
int countLetters(char*);
int countDigits(char*);
bool islowerCase(char *strPtr);
int main()
{
char passWord[20];
cout << "Enter a password consisting of exactly 4 letters in lower case letters and 6 digits:";
cin.getline(passWord,20);
if (testPassWord(passWord))
cout << "Please wait - your password is being verified" << endl;
else
{
cout << "Please enter a password with exactly 4 letters in lower case letters and 6 digits" << endl;
cout << "For example, my1237Ru99 is valid" << endl;
}
// Fill in the code that will call countLetters and countDigits and will
//print to the screen both the number of
// letters and digits contained in the password.
cout << "There are " << countLetters(passWord) << " letters in the password.\n";
cout << "There are " << countDigits(passWord) << " digits in the password.\n";
if(countLetters(passWord)==4 && countDigits(passWord)==6)
{
cout<<"password: "<<passWord<<" is valid"<<endl;
}
else
cout<<"So, password: "<<passWord<<" is INVALID"<<endl;
//Pause the system for a while
system("PAUSE");
return 0;
}
//**************************************************************
// testPassWord
//
// task: determines if the word in the character array passed to it, contains //exactly 5 letters and 3 digits.
// data in: a word contained in a character array
// data returned: true if the word contains 5 letters & 3
// digits, false otherwise
//
//**************************************************************
bool testPassWord(char custPass[])
{
int numLetters, numDigits, length;
length = strlen(custPass);
if(!islowerCase(custPass))
{
cout<<"Lower case letters are only allowed for valid password.";
}
numLetters = countLetters(custPass);
numDigits = countDigits(custPass);
//Check valid password consists of 10 characters,6 of which must be digits
//and the other 4 letters
if (numLetters == 4 && numDigits == 6 && length == 10 )
return true;
else
return false;
}
//**************************************************************
// countLetters
//
// task: counts the number of letters (both
// capital and lower case)in the string
// data in: a string
// data returned: the number of letters in the string
//
//**************************************************************
int countLetters(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (isalpha(*strPtr))
occurs++;
strPtr++;
}
return occurs;
}
bool islowerCase(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (islower(*strPtr))
occurs++;
strPtr++;
}
if(occurs==4)
return true;
else
return false;
}
//**************************************************************
// countDigits
//
// task: counts the number of digits in the string
// data in: a string
// data returned: the number of digits in the string
//
//**************************************************************
int countDigits(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (isdigit(*strPtr)) // isdigit determines if the character is a digit
occurs++;
strPtr++;
}
return occurs;
}
Learn more about program
https://brainly.com/question/26497128
#SPJ4
How did NAT help resolve the shortage of IPV4 addresses after the increase in SOHO, Small Office Home Office, sites requiring connections to the Internet? Choose the best answer below:
A.It provides a migration path to IPV6.
B.It permits routing the private IPV4 subnet 10.0.0.0 over the Internet.
C.NAT adds one more bit to the IP address, thus providing more IP addresses to use on the Internet.
D.It allowed SOHO sites to appear as a single IP address, (and single device), to the Internet even though there may be many devices that use IP addresses on the LAN at the SOHO site.
Even though there may be numerous devices using IP addresses on the LAN at the SOHO site, it allowed SOHO sites to appear to the Internet as a single IP address (and single device).
After an increase in SOHO, Small Office Home Office, sites needing internet connections, NAT assisted in resolving the IPV$ address shortage.
A router can convert a public IP address to a private IP address and vice versa thanks to network address translation (NAT). The private IP addresses are kept secret (private) from the outside world thanks to the additional protection it gives the network. By doing this, NAT enables routers (single devices) to serve as intermediaries between local (private) networks and the Internet (public networks). A single distinct IP address is needed with this arrangement to identify a complete group of computers to anyone outside their networks.
Know more about IP address here:
https://brainly.com/question/16011753
#SPJ4
investigate and report on the purpose, relative advantages, and relative disadvantages of two network management software tools. comment on another person's post.
The two network management tools are Datadog and Zabbix.
What are advantages of Datadog and Zabbix?Datadog
The application topology and interdependencies are well visualized, and Datadog assists in automatically monitoring and analyzing network traffic between the application's component parts. It is simple to access the metrics' past. It is easy to manage the downtime for different resources.
Zabbix
Zabbix can keep an eye on servers, networks, databases, and websites. The zabbix interface is absolutely fantastic. The team can monitor only the things that are important to them using the customized dashboards. aids in the production of reports on the network assets' performance. Monitoring connection availability is beneficial.
What are disadvantages of Datadog and Zabbix?
Datadog
A faster method of removing the resources from datadog would be preferable. Training is more expensive. There is a lack of documentation in some setup-related areas. Customization is valued over simplicity.
Zabbix
Reports that are already created can also be updated. Being open source does not imply that something is free. Overall, the UI is functional, not necessarily attractive. Increase the number of triggers that can be configured The user interface is now slightly more tidy. The process is a little bit lighter as a result.
Learn more about network monitoring tools
https://brainly.com/question/14293290
#SPJ4
The branch-circuit load for a counter-mounted cooking unit supplied from a single branch circuit shall be calculated by adding ____ of the nameplate rating.
A 50%
B 80%
C 100 %
D 125 %
The branch-circuit load for a counter-mounted cooking unit supplied from a single branch circuit shall be calculated by adding 80% of the nameplate rating.
The National Electrical Code (NEC) specifies that the branch-circuit load for a counter-mounted cooking unit (such as a stove, oven, or cooktop) supplied from a single branch circuit should be calculated by adding 80% of the nameplate rating. This is to account for the potential for high levels of electrical demand when the cooking unit is in use. It is important to ensure that the branch circuit is adequately sized to handle the expected electrical load in order to prevent overloading and potential hazards such as fires or electrical shock.
Learn more about NEC, here https://brainly.com/question/10165093
#SPJ4
Which of the following are true regarding using multiple vlans on a single switch?
a. The number of collision domains remains the same.
b. The number of broadcast domains increases.
There are more broadcast domains available. There are still the same amount of collision domains.
Although a switch can support many VLANs, none of them can speak to one another directly. If they could, the goal of a VLAN, which is to isolate a portion of the network, would be defeated. A router is necessary for VLAN communication. Numerous VLANs can be present on a single switch, and VLANs can span multiple switches. Trunking, a method that enables information from many VLANs to be transferred over a single connection between switches, is required in order for numerous VLANs on various switches to be able to communicate with one another.
Learn more about domains here:-
https://brainly.com/question/28135761
#SPJ4
In this little assignment you are given a string of space separated numbers, and have to return the highest and lowest number in C++.
Examples
highAndLow("1 2 3 4 5"); // return "5 1"
highAndLow("1 2 -3 4 5"); // return "5 -3"
highAndLow("1 9 3 4 -5"); // return "9 -5"
Notes
All numbers are valid Int32, no need to validate them.
There will always be at least one number in the input string.
Output string must be two numbers separated by a single space, and highest number is first.
The Array object, like arrays in other programming languages, allows for the storage of a group of various elements under a single variable name and provides members for carrying out standard array operations.
how to use string?The sum is equal to zero if the integers I are also equal to zero. If they add up to 1, then the result is 2. The sum is equal to 3 if they add up to 3. The sum is equivalent to 6 if they add up to 5. If they add up to 7, then the total also adds up to 7. The sum is equal to 8 if they add up to 8.
"#include iostream"
"cstring" should be included using the namespace std;
char integers[size]; int main(); /Declaring Variables & Character Array; int size = 100;
Small and large numbers are represented by the characters "9," "0," etc.
cout "Please enter a series of integers with a comma between each one."; cin >> integers; /Gathering Integers;
/To determine the length of the string, enter size = (strlen(integers) + 1);
creating the sum variable by setting it to 0;
The string's integers are added together as a whole using the formula for (int I = 0; I size; i++)
If (integers I >= "0" && I = "9" && I >= "0")
To know more about Array visit :-
brainly.com/question/19570024
#SPJ4
3. Suppose up to 300 cars per hour can travel between any two of the cities 1, 2, 3, and 4. Formulate a maximum flow problem that can be used to determine how many cars can be sent in the next two hours from city 1 to city 4. Give the network diagram and the LP formulation for your model.
Let $x ij$ represent the quantity of cars that will be delivered in the following two hours from city I to city j.
Create a maximum flow issue?Network Diagram:
LP Formulation:
Maximize Z = 150x14 + 150x24
Subject to:
x11 + x12 + x13 + x14 <= 300 (flow from city 1 to other cities)
x21 + x22 + x23 + x24 <= 300 (flow from city 2 to other cities)
x31 + x32 + x33 + x34 <= 300 (flow from city 3 to other cities)
x41 + x42 + x43 + x44 <= 300 (flow from city 4 to other cities)
x11 + x21 + x31 + x41 = 150 (flow into city 1)
x12 + x22 + x32 + x42 = 150 (flow into city 2)
x13 + x23 + x33 + x43 = 150 (flow into city 3)
x14 + x24 + x34 + x44 = 150 (flow into city 4)
xij >= 0 (all variables must be positive)
Where xij represents the number of cars traveling from city i to city j in two hours.To learn more about network diagram and the LP formulation refer to:
https://brainly.com/question/29672656
#SPJ4
۷۲ Q1. Write a C++ program that takes a positive integer number and displays all the factors of that number. Thus, for example, if number=12, the program will print 1,2,3,4,6,12
Answer:
#include <iostream>
using namespace std;
int main() {
int x;
cin>>x;
if (x>0){
for (int i=1;i<=x;i++){
if(x%i==0){
cout<<i<<" ";
}
}
}
else {
cout<<"write a positive num";
}
return 0;
}
Explanation:
i first checked if the num is positvie if no you ask the user for a positive num
i used a loop to find the factors by dividing the entered number on every num from 1 to the num
What are the 5 common hazards?
Answer:
Biological Hazards.
Chemical Hazards.
Physical Hazards.
Safety Hazards.
Ergonomic Hazards.
Psychosocial Hazards.
The tailstock
a. is used to mount the lathe center
b. cannot be used for taper turning
C. is removed when long work must be turned
D. holds the inner end of the work being turned