A popular 24-hour health club, Get Swole, has 29 people using its facility at time t=0. During the time interval 0≤t≤20 hours, people are entering the health club at the rate E(t)=−0.018t 2
+11 people per hour. During the same time period people are leaving the health club at the rate of L(t)=0.013t 2
−0.25t+8 people per hour. a.) Is the number of people in the facility increasing or decreasing at time t=11 ? Explain your reasoning. b.) To the nearest whole number, how many people are in the health club at time t=20. c. At what time t, for 0≤t≤20, is the amount of people in the health club a maximum? Justify your answer.
a) The rate of people leaving the health club, L(t), can be calculated as:
L(11) = 0.013(11)^2 - 0.25(11) + 8
b) To find the number of people, we integrate the net rate of change over the time interval:
Number of People at t=20 = Integral of (E(t) - L(t)) dt, from t=0 to t=20
c) This can be done by finding the critical points of the net rate of change and evaluating them to determine whether they correspond to maximum or minimum values.
To determine whether the number of people in the facility is increasing or decreasing at time t=11, we need to compare the rates of people entering and leaving the health club at that time.
a) At time t=11 hours:
The rate of people entering the health club, E(t), can be calculated as:
E(11) = -0.018(11)^2 + 11
Similarly, the rate of people leaving the health club, L(t), can be calculated as:
L(11) = 0.013(11)^2 - 0.25(11) + 8
By comparing the rates of people entering and leaving, we can determine if the number of people in the facility is increasing or decreasing. If E(t) is greater than L(t), the number of people is increasing; otherwise, it is decreasing.
b) To find the number of people in the health club at time t=20, we need to integrate the net rate of change of people over the time interval 0≤t≤20 hours.
The net rate of change of people can be calculated as:
Net Rate = E(t) - L(t)
To find the number of people, we integrate the net rate of change over the time interval:
Number of People at t=20 = Integral of (E(t) - L(t)) dt, from t=0 to t=20
c) To determine the time t at which the number of people in the health club is a maximum, we need to find the maximum value of the number of people over the interval 0≤t≤20.
This can be done by finding the critical points of the net rate of change and evaluating them to determine whether they correspond to maximum or minimum values.
Let's calculate these values and solve the problem.
Note: Since the calculations involve a series of mathematical steps, it would be best to perform them offline or using appropriate computational tools.
Visit here to learn more about rate brainly.com/question/25565101
#SPJ11
Rewrite each of the following as a base-ten numeral. a. 3• 106 +9.104 + 8 b. 5.104 + 6 .
a. The base-ten numeral for the expression 3• 10^6 + 9.10^4 + 8 is 3,009,008.
To rewrite the expression as a base-ten numeral, we need to evaluate each term and then add them together.
The term 3•10^6 can be calculated as 3 multiplied by 10 raised to the power of 6, which equals 3,000,000.
The term 9.10^4 can be calculated as 9 multiplied by 10 raised to the power of 4, which equals 90,000.
The term 8 is simply the number 8.
Adding these three terms together, we get:
3,000,000 + 90,000 + 8 = 3,009,008.
Therefore, the base-ten numeral for the expression 3• 10^6 + 9.10^4 + 8 is 3,009,008.
b. The base-ten numeral for the expression 5.10^4 + 6 is 50,006.
The term 5.10^4 can be calculated as 5 multiplied by 10 raised to the power of 4, which equals 50,000.
The term 6 is simply the number 6.
Adding these two terms together, we get:
50,000 + 6 = 50,006.
Therefore, the base-ten numeral for the expression 5.10^4 + 6 is 50,006.
To know more about base-ten numeral refer here:
https://brainly.com/question/24020782
#SPJ11
The RC circuit has an emf given in volts) by 400sint, a resistance of 100 ohms, an capacitance of 10-farad. Initially there is no charge on the capacitor. Find the current in the circuit at any time t ?
The current in the RC circuit at any time t is given by the expression 4sint * (1 - e^(-t/1000)), where EMF = 400sint, R = 100 ohms, and C = 10 farads. This equation takes into account the charging process in the circuit and accounts for the resistance and capacitance values.
To compute the current in the RC circuit at any time t, we can use the equation for charging in an RC circuit:
I(t) = (EMF/R) * (1 - e^(-t/RC))
where I(t) is the current at time t, EMF is the electromotive force (given as 400sint), R is the resistance (100 ohms), C is the capacitance (10 farads), and e is the base of the natural logarithm.
Substituting the values into the equation, we have:
I(t) = (400sint/100) * (1 - e^(-t/(10*100)))
Simplifying further:
I(t) = 4sint * (1 - e^(-t/1000))
Therefore, the current in the circuit at any time t is given by the expression 4sint * (1 - e^(-t/1000)).
To know more about RC circuit refer here:
https://brainly.com/question/2741777#
#SPJ11
q w b r s how many -letter code words can be formed from the letters if no letter is repeated? if letters can be repeated? if adjacent letters must be different?
Number of 5-letter code words with no repeated letters: 120
Number of 5-letter code words allowing letter repetition: 3125
Number of 5-letter code words with adjacent letters being different: 1280
To find the number of 5-letter code words that can be formed from the letters q, w, b, r, s, we will consider three scenarios: no letter repeated, letters can be repeated, and adjacent letters must be different.
1. No letter repeated:
In this case, we cannot repeat any letter in the code word. So, for the first letter, we have 5 choices, for the second letter, we have 4 choices (since one letter has already been used), for the third letter, we have 3 choices, for the fourth letter, we have 2 choices, and for the fifth letter, we have 1 choice.
Therefore, the number of 5-letter code words with no repeated letters is:
5 × 4 × 3 × 2 × 1 = 120
2. Letters can be repeated:
In this case, we can repeat letters in the code word. So, for each of the 5 positions, we have 5 choices (since we can choose any of the 5 letters).
Therefore, the number of 5-letter code words allowing letter repetition is:
5⁵ = 3125
3. Adjacent letters must be different:
if adjacent letters cannot be repeated. 5 letter codes to be made.
Possible options for each space = 5
so first digit has 5 options, second digit has 4 options , third digit has 4 options , fourth digit has 4 options and the final digit will have only 4 options also.
So total number of codes = 5 × 4 × 4× 4× 4 = 1280 codes
Hence, the total number of codes as calculated by permutation and combination is 1280.
Learn more about Permutation here
https://brainly.com/question/29428320
#SPJ4
Solve the initial value problem
dy/dt=2(t+1)y^2=0 , y(0)= -1/3
Give the largest interval in which the solution is defined
The solution y = -1/(t^2 + 2t + 3) is defined for all real values of t, and the largest interval in which the solution is defined is (-∞, ∞).
To solve the initial value problem dy/dt = 2(t + 1)y^2, y(0) = -1/3, we can separate the variables and integrate both sides with respect to t.
Starting with the given differential equation:
dy/y^2 = 2(t + 1) dt
Integrating both sides:
∫(dy/y^2) = ∫(2(t + 1) dt)
Integrating the left side using the power rule for integration gives:
-1/y = t^2 + 2t + C1
To find the constant of integration, we use the initial condition y(0) = -1/3:
-1/(-1/3) = 0^2 + 2(0) + C1
3 = C1
Therefore, the equation becomes:
-1/y = t^2 + 2t + 3
Next, we can solve for y:
y = -1/(t^2 + 2t + 3)
Now, let's determine the largest interval in which the solution is defined. The denominator of y is t^2 + 2t + 3, which represents a quadratic polynomial. To find the interval where the denominator is non-zero, we need to consider the discriminant of the quadratic equation.
The discriminant, Δ, is given by Δ = b^2 - 4ac, where a = 1, b = 2, and c = 3. Substituting the values, we have:
Δ = (2)^2 - 4(1)(3) = 4 - 12 = -8
Since the discriminant is negative, Δ < 0, the quadratic equation t^2 + 2t + 3 = 0 has no real solutions. Therefore, the denominator t^2 + 2t + 3 is always positive and non-zero.
Hence, the solution y = -1/(t^2 + 2t + 3) is defined for all real values of t, and the largest interval in which the solution is defined is (-∞, ∞).
Learn more about interval here
https://brainly.com/question/479532
#SPJ11
A bag of assorted candy contains the following proportions of six candies: Assorted Candy Probability Nerds Sour Patches 0.3 Gum Tarts Hershey Kisses 0.1 Tootsie Pops ? 0.2 0.2 0.1 What is the probability of picking a Tootsie Pop? 0 -1.40 O 0.11 O 1.34 O 0.10 O None of the above
According to the information provided, the probability of picking a Tootsie Pop is 0.1 or 10%. Therefore, the correct answer is 0.10.
The probability of picking a Tootsie Pop can be calculated based on the information provided for the proportions of different candies in the bag. The given probability of 0.1 or 10% indicates that out of the total candies in the bag, Tootsie Pops make up 10% of the assortment.
To calculate the probability, we consider that each candy has an equal chance of being selected from the bag. Therefore, the probability of picking a Tootsie Pop is the proportion of Tootsie Pops in the assortment, which is 0.1 or 10%.
In summary, when randomly selecting a candy from the bag, there is a 10% chance or a probability of 0.1 of picking a Tootsie Pop.
Learn more about probability:
https://brainly.com/question/13604758
#SPJ11
Write 3/5 as an Egyptian fraction. Given that a divides b and b divides c, prove that a divides c.
To represent 3/5 as an Egyptian fraction, we can write it as 1/2 + 1/10.
An Egyptian fraction is a representation of a fraction as a sum of unit fractions, where a unit fraction is a fraction with a numerator of 1. To represent 3/5 as an Egyptian fraction, we need to find unit fractions whose sum equals 3/5.
We can start by finding a unit fraction that is less than or equal to 3/5. The largest unit fraction satisfying this condition is 1/2. By subtracting 1/2 from 3/5, we obtain 1/10. Hence, we can write 3/5 as 1/2 + 1/10, which is an Egyptian fraction representation.
Now, let's prove the statement that if a divides b and b divides c, then a divides c. Suppose a, b, and c are integers, and a divides b and b divides c. This means there exist integers k and m such that b = ak and c = bm.
Substituting the value of b in the equation for c, we have c = amk. Since amk is a product of integers, c is also divisible by a. Hence, we have proved that if a divides b and b divides c, then a divides c.
Learn more about fraction here:
https://brainly.com/question/10354322
#SPJ11
Let A = [-1 -4 3 -1] To find the eigenvalues of A, you should reduce a system of equations with a coefficient matrix of (Use L to represent the unknown eigenvalues)
Taking the given data into consideration we conclude that the eigenvalues of A are -1 and -4, under the condition that A = [-1 -4 3 -1].
To evaluate the eigenvalues of A = [-1 -4 3 -1], we need to reduce a system of equations with a coefficient matrix of
[tex]A - L_I,[/tex]
Here,
L = scalar and I is the identity matrix. The eigenvalues are the values of L that satisfy the equation
[tex]det(A - L_I) = 0.[/tex]
Firstly , we need to subtract LI from A, where I is the 4x4 identity matrix:
[tex]A - L_I = [-1 -4 3 -1] - L[1 0 0 0; 0 1 0 0; 0 0 1 0; 0 0 0 1][/tex]
[tex]A - L_I = [-1 -4 3 -1] - [L 0 0 0; 0 L 0 0; 0 0 L 0; 0 0 0 L][/tex]
[tex]A - L_I = [-1-L -4 3 -1; 0 -4-L 0 0; 0 0 3-L 0; 0 0 0 -1-L][/tex]
Next, we need to find the determinant of
[tex]A - L_I:det(A - L_I) = (-1-L) * (-1-L) * (-4-L) * (-1-L)[/tex]
[tex]det(A - L_I) = -(L+1)^2 * (L+4)[/tex]
Finally, we need to solve the equation
[tex]det(A - L_I) = 0 for L:-(L+1)^2 * (L+4) = 0[/tex]
This equation has two solutions: L = -1 and L = -4.
Therefore, the eigenvalues of A are -1 and -4.
To learn more about eigenvalues
https://brainly.com/question/15423383
#SPJ4
Two schools conduct a survey of their students to see if they would be interested in having free tutoring available after school. We are interested in seeing if the first school population has a lower proportion interested in tutoring compared to the second school population. You wish to test the following claim (H) at a significance level of a = 0.005. H:P1 = P2 H:P
The claim to be tested is whether the proportion of students interested in tutoring at the first school is lower than the proportion at the second school. The significance level for the test is 0.005.
The claim (H) to be tested is whether the proportion of students interested in tutoring at the first school (P1) is lower than the proportion at the second school (P2).
The significance level for the test is a = 0.005, indicating the threshold for rejecting the null hypothesis (H0) and accepting the alternative hypothesis (Ha).
The null hypothesis (H0) for this test would be: P1 ≥ P2 (the proportion at the first school is greater than or equal to the proportion at the second school).
The alternative hypothesis (Ha) would be: P1 < P2 (the proportion at the first school is lower than the proportion at the second school).
Therefore, the claim (H) to be tested is H0: P1 ≥ P2, and the significance level is a = 0.005.
To know more about claim refer here:
https://brainly.com/question/19173275#
#SPJ11
Inil trypothesistent where you reject Hy only in the uppertal, what is the critical value of the t-test statistic with 56 degrees of freedom at the 0.05 level of significance? Click to view the first soon the table of Crition value of. Click to view the second page of the table of articles of The offical value of the most static Hound to four decimal places as needed
The critical value of the t-test statistic with 56 degrees of freedom at the 0.05 level of significance is approximately 1.671.
How to calculate t-test statisticTo find the critical value of the t-test statistic with 56 degrees of freedom at the 0.05 level of significance, we can refer to a t-distribution table.
With 56 degrees of freedom, we need to find the value corresponding to the upper tail area of 0.05 (or 5%) in the t-distribution table.
Based on the table, the critical value for a one-tailed test with 56 degrees of freedom and a significance level of 0.05 is approximately 1.671.
Therefore, the critical value of the t-test statistic with 56 degrees of freedom at the 0.05 level of significance is approximately 1.671.
Learn more about t-test statistic at https://brainly.com/question/6589776
#SPJ1
(Circumference MC)
The diameter of a child's bicycle wheel is 18 inches. Approximately how many revolutions of the wheel will it take to travel 1,700 meters? Use 3.14 for π and round to the nearest whole number. (1 meter ≈ 39.3701 inches)
3,925 revolutions
2,368 revolutions
1,184 revolutions
94 revolutions
Answer:
The circumference of the wheel can be calculated using the formula C = πd, where C is the circumference and d is the diameter. In this case, the diameter is 18 inches, so the circumference is C = π * 18 = 56.52 inches.
To find out how many revolutions it takes to travel 1,700 meters, we first need to convert 1,700 meters to inches. Since 1 meter ≈ 39.3701 inches, 1,700 meters ≈ 66,929.17 inches.
Now we can divide the total distance in inches by the circumference of the wheel to find out how many revolutions it takes: 66,929.17 inches / 56.52 inches/revolution ≈ 1,184 revolutions.
Therefore, it will take approximately 1,184 revolutions of the wheel to travel 1,700 meters. This corresponds to option c.
b. use the rank nullity theorem to explain whether or not it is possible for to be surjective.
T can be surjective since the dimension of the domain is equal to the dimension of the codomain, indicating that every element in the codomain has at least one pre-image in the domain.
To determine whether or not a given linear transformation T can be surjective, we can use the Rank-Nullity Theorem. The Rank-Nullity Theorem states that for any linear transformation T: V → W, where V and W are vector spaces, the sum of the rank of T (denoted as rank(T)) and the nullity of T (denoted as nullity(T)) is equal to the dimension of the domain V.
In our case, we want to determine whether T can be surjective, which means that the range of T should equal the entire codomain. In other words, every element in the codomain should have at least one pre-image in the domain. If this condition is satisfied, we can say that T is surjective.
To apply the Rank-Nullity Theorem, we need to consider the dimension of the domain and the rank of the linear transformation. Let's assume that the linear transformation T is represented by an m × n matrix A, where m is the dimension of the domain and n is the dimension of the codomain.
The rank of a matrix A is defined as the maximum number of linearly independent columns in A. It represents the dimension of the column space (or range) of T. We can calculate the rank of A by performing row operations on A and determining the number of non-zero rows in the row-echelon form of A.
The nullity of a matrix A is defined as the dimension of the null space of A, which represents the set of all solutions to the homogeneous equation A = . The nullity can be calculated by determining the number of free variables (or pivot positions) in the row-echelon form of A.
Now, let's apply the Rank-Nullity Theorem to our scenario. Suppose we have a linear transformation T: ℝ^m → ℝ^n, represented by the matrix A. We want to determine if T can be surjective.
According to the Rank-Nullity Theorem, we have:
dim(V) = rank(T) + nullity(T),
where dim(V) is the dimension of the domain (m in this case).
If T is surjective, then the range of T should span the entire codomain, meaning rank(T) = n. In this case, we have:
dim(V) = n + nullity(T).
Rearranging the equation, we find:
nullity(T) = dim(V) - n.
If nullity(T) is non-zero, it means that there are vectors in the domain that get mapped to the zero vector in the codomain. This implies that T is not surjective since not all elements in the codomain have pre-images in the domain.
On the other hand, if nullity(T) is zero, then dim(V) - n = 0, and we have:
dim(V) = n.
In this case, T can be surjective since the dimension of the domain is equal to the dimension of the codomain, indicating that every element in the codomain has at least one pre-image in the domain.
Therefore, by applying the Rank-Nullity Theorem, we can determine whether or not a linear transformation T can be surjective based on the dimensions of the domain and codomain, as well as the rank and nullity of the associated matrix. If nullity(T) is zero, then T can be surjective; otherwise, if nullity(T) is non-zero, T cannot be surjective.
Learn more about codomain here
https://brainly.com/question/17311413
#SPJ11
First, we must find the distance between Dimitri and the flagpole. As you can see in the figure attached, we draw a line with a 39° angle since to the point of sight (Which is called "A") to the bottom of the flagpole ("B"). We have that "A" is 5.8 feet above the ground, so we can find the distance AC:
Tan(α)=opposite leg/adjacent leg
The opposite leg is BC=5.8 feet, and the adjacent leg is the distance AC. So we have:
Tan(39°)=5.8/AC
AC=5.8/Tan(39°)
AC=7.16 feet
Let's find the height CD:
Tan(α)=opposite leg/adjacent leg
The opposite leg is CD and the adjacent leg is the distance AC=7.16 feet. Then:
Tan(39°)=7.16/CD
CD=Tan(39°)x7.16
CD=5.80 feet
Now we can calculate the height of top of the flagpole above the ground (BD):
BD=5.80 feet+5.80 feet
BD=11.6 feet
Rounded to the nearest foot:
BD=12.0 feet
How high is the top of the flagpole above the ground?
The answer is: 12.0 feet
First, we must find the distance between Dimitri and the - 1
a)
It is the angle of depression.
Given,
Boy is standing at second floor of the house and sees the dog at the bottom surface.
So,
The angle through which the boy can see the dog at the ground floor will be angle of depression( that is seeing something below the eye level).
b)
Given,
Height = 3m
Angle of depression = 32°
Hence from the trigonometry,
tanФ = perpendicular/base
tan 32 = 3/base
0.6248 = 3/base
base = 4.801 m
Thus the dog is 4.801 m far from the house.
c)
Given,
Base = 7m
Angle of depression = 32°
Again,
tanФ = p/b
tan 32 = p /7
p= 4.3736 m
Thus the height of boy's house is 4.3736m
Learn more about angle of depression,
https://brainly.com/question/11348232
#SPJ1
The authors of the paper "Myeloma in Patients Younger than Age 50 Years Presents with More Favorable Features and Shows Better Survival" (Blood [2008]: 4039–4047) studied patients who had been diagnosed with stage 2 multiple myeloma prior to the age of 50. For each patient who received high dose chemotherapy, the number of years that the patient lived after the therapy (survival time) was recorded. The cumulative relative frequencies in the accompanying table were approximated from survival graphs that appeared in the paper.
Years Survived | Cumulative Relative Frequency
0 to <2 .10
2 to <4 .52
4 to <6 .54
6 to <8 .64
8 to <10 .68
10 to <12 .70
12 to <14 .72
14 to <16 1.00
a. Use the given information to construct a cumulative relative frequency plot.
b. Use the cumulative relative frequency plot from Part (a) to answer the following questions:
i. What is the approximate proportion of patients who lived fewer than 5 years after treatment?
ii. What is the approximate proportion of patients who lived fewer than 7.5 years after treatment? iii. What is the approximate proportion of patients who lived more than 10 years after treatment?
a. The cumulative relative frequency plot can be constructed by plotting the cumulative relative frequency on the y-axis and the years survived on the x-axis.
The plot will consist of step functions connecting the data points. The plot for the given data is as follows:
Years Survived: | Cumulative Relative Frequency:
0 to <2 | 0.10
2 to <4 | 0.52
4 to <6 | 0.54
6 to <8 | 0.64
8 to <10 | 0.68
10 to <12 | 0.70
12 to <14 | 0.72
14 to <16 | 1.00
b. Using the cumulative relative frequency plot:
i. The approximate proportion of patients who lived fewer than 5 years after treatment can be determined by looking at the cumulative relative frequency at the interval 0 to <4. The cumulative relative frequency at the end of this interval is 0.54. Therefore, approximately 54% of patients lived fewer than 5 years after treatment.
ii. The approximate proportion of patients who lived fewer than 7.5 years after treatment can be determined by looking at the cumulative relative frequency at the interval 0 to <8. The cumulative relative frequency at the end of this interval is 0.68. Therefore, approximately 68% of patients lived fewer than 7.5 years after treatment.
iii. The approximate proportion of patients who lived more than 10 years after treatment can be determined by subtracting the cumulative relative frequency at the interval 10 to <12 (0.70) from 1. Since the cumulative relative frequency at 10 to <12 represents the proportion of patients who lived up to 10 years, subtracting it from 1 gives us the proportion of patients who lived more than 10 years. Therefore, approximately 30% of patients lived more than 10 years after treatment.
To know more about cumulative relative frequency click here: brainly.com/question/13646998
#SPJ11
start at 2 create a patten that multiplies each number by 2 and then adds 1 stop when you have 5 numbers
Pattern: The pattern is to start with the number 2 and repeatedly multiply each number by 2 and then add 1 until we have a sequence of 5 numbers.
Start with the number 2.
Multiply the starting number by 2: 2 * 2 = 4.
Add 1 to the result from step 2: 4 + 1 = 5. We now have the first number in our sequence.
Multiply the previous number (5) by 2: 5 * 2 = 10.
Add 1 to the result from step 4: 10 + 1 = 11. We now have the second number in our sequence.
Repeat the process: multiply the previous number by 2 and then add 1.
Multiply the previous number (11) by 2: 11 * 2 = 22.
Add 1 to the result from step 6: 22 + 1 = 23. We now have the third number.
Repeat steps 6 and 7 two more times to obtain the fourth and fifth numbers:
Fourth number: (23 * 2) + 1 = 47.
Fifth number: (47 * 2) + 1 = 95.
Thus, the pattern generates the sequence: 2, 5, 11, 23, 47, 95.
Know more about the sequence click here:
https://brainly.com/question/19819125
#SPJ11
A population has mean 555 and standard deviation 40. Find the mean and standard deviation of sample means for samples of size 50. Find the probability that the mean of a sample of size 50 will be more than 570. 2. A prototype automotive tire has a design life of 38,500 miles with a standard deviation of 2,500 miles. Five such tires are manufactured and tested. On the assumption that the actual population mean is 38,500 miles and the actual population standard deviation is 2,500 miles, find the probability that the sample mean will be less than 35,000 miles. Assume that the distribution of lifetimes of such tires is normal. A normally distributed population has mean 1,200 and standard deviation 120. Find the probability that a single randomly selected element X of the population is between 1,100 and 1,300. Find the mean and standard deviation of X for samples of size 25. Find the probability that the mean of a sample of size 25 drawn from this population is between 1,100 and 1,300. 4. Suppose the mean weight of school children's book bags is 17.5 pounds, with standard deviation 2.2 pounds. Find the probability that the mean weight of a sample of 30 book bags will exceed 18 pounds. 5. The mean and standard deviation of the tax value of all vehicles registered in NCR are u-550,000 and o=80,000. Suppose random samples of size 100 are drawn from the population of vehicles. What are the mean ux and standard deviation ox of the sample mean X? 6. The IQs of 600 applicants of a certain college are approximately normally distributed with a mean of 115 and a standard deviation of 12. If the college requires an IQ of at least 95, how many of these students will be rejected on this basis regardless of their other qualifications? 7. The transmission on a model of a specific car has a warranty for 40,000 miles. It is known that the life of such a transmission has a normal distribution with a mean of 72,000 miles and a standard deviation of 12,000 miles. • What percentage of the transmissions will fail before the end of the warranty period? What percentage of the transmission will be good for more than 100,000 miles?
1) The probability that the mean of a sample of size 50 will be more than 570 is approximately 0.0047, or 0.47%.
2) P(z < -3.1304) is a negligible smaller area in the z-score.
3) P(1100 < x< 1300) ≈ P(|z|<4.166) almost equal to 1.
4) The probability that the mean weight of a sample of 30 book bags will exceed 18 pounds is 0.1075.
5) The mean ux and standard deviation ox of the sample mean X are: 550000 and 80000.
6) 29 students of these students will be rejected on this basis regardless of their other qualifications.
7) 0.38% percentage of the transmissions will fail before the end of the warranty period.
0.99% percentage of the transmission will be good for more than 100,000 miles.
Here, we have,
To find the mean and standard deviation of sample means for samples of size 50, we can use the properties of the sampling distribution.
The mean of the sample means (μₘ) is equal to the population mean (μ), which is 555 in this case. Therefore, the mean of the sample means is also 555.
The standard deviation of the sample means (σₘ) can be calculated using the formula:
σₘ = σ / √(n)
where σ is the population standard deviation and n is the sample size. In this case, σ = 40 and n = 50. Plugging in these values, we get:
σₘ = 40 / √(50) ≈ 5.657
So, the standard deviation of the sample means is approximately 5.657.
Now, to find the probability that the mean of a sample of size 50 will be more than 570, we can use the properties of the sampling distribution and the standard deviation of the sample means.
First, we need to calculate the z-score for the given value of 570:
z = (x - μₘ) / σₘ
where x is the value we want to find the probability for. Plugging in the values, we get:
z = (570 - 555) / 5.657 ≈ 2.65
Using a standard normal distribution table or calculator, we can find the probability associated with this z-score:
P(Z > 2.65) ≈ 1 - P(Z < 2.65)
Looking up the value for 2.65 in the standard normal distribution table, we find that P(Z < 2.65) ≈ 0.9953.
Therefore,
P(Z > 2.65) ≈ 1 - 0.9953 ≈ 0.0047
Learn more on probability here;
brainly.com/question/24756209
#SPJ4
What is the common ratio of the sequence 3/2,5/4, 1, 3/4, 1/2, 1/4 a. 1/2 b. 3/2 c. 1/4 d. 4/3
The common ratio of the sequence is :
None of these.
Let's calculate the common ratio of the given sequence step by step.
The given sequence is: 3/2, 5/4, 1, 3/4, 1/2, 1/4
To find the common ratio, we need to divide each term by its previous term. Let's calculate the ratios:
(5/4) / (3/2) = (5/4) * (2/3) = 10/12 = 5/6
1 / (5/4) = (4/4) / (5/4) = 4/5
(3/4) / 1 = 3/4
(1/2) / (3/4) = (1/2) * (4/3) = 4/6 = 2/3
(1/4) / (1/2) = (1/4) * (2/1) = 2/4 = 1/2
As we can see, the ratios are not consistent. The common ratio should be the same for all terms in a geometric sequence. In this case, the ratios are not equal, indicating that the given sequence is not a geometric sequence.
None of the options provided (a. 1/2, b. 3/2, c. 1/4, d. 4/3) match the common ratio of the sequence because there is no common ratio to identify.
To learn more about geometric sequence visit : https://brainly.com/question/24643676
#SPJ11
Awate and has height 8 meters and radius 2 meters. If the tank is filled to a te te the integral that determines how much work is required to pump the tappe above the top of the tank? Use p to represent the density of water and gegant Do not evaluate the integral.
The work done against gravity to pump the water above the top tank is [tex]Work = \int\limits^{\Delta h}_0 {(\rho g\pi r^2)(\Delta h \ + \ h)} \, dh[/tex].
What is the work done in pumping the water?The volume of water in the tank up to height h is given as;
V = πr²h
The mass of water in the tank;
m = ρV
where;
ρ is the density of waterThe downward weight of water in the tank;
W = mg
Where;
g is acceleration due to gravityThe work done against gravity to pump the water above the top of the tank is calculated as follows;
dW = W(Δh + h)
where;
Δh is the height above the top of the tankWork = ∫[0 to Δh] (W(Δh + h)) dh
W = ρgV
Work = ∫[0 to Δh] (ρgV(Δh + h)) dh
V = πr²h
Work = ∫[0 to Δh] (ρgπr²(Δh + h)) dh
[tex]Work = \int\limits^{\Delta h}_0 {(\rho g\pi r^2)(\Delta h \ + \ h)} \, dh[/tex]
Learn more about work done here: https://brainly.com/question/8119756
#SPJ4
A culture of yeast grows at a rate proportional to its size. If the initial population is 4000 cells and it doubles after 2 hours, answer the following questions.
1. Write an expression for the number of yeast cells after t hours.
Answer: P(t)=
2. Find the number of yeast cells after 6 hours.
Answer:
3. Find the rate at which the population of yeast cells is increasing at 6 hours.
Answer (in cells per hour):
Therefore, at 6 hours, the population of yeast cells is increasing at a rate of approximately 11,418.3 cells per hour.
(1)To write an expression for the number of yeast cells after t hours, we can use the information that the population is proportional to its size. Let's denote the number of yeast cells at time t as P_(t).
Given that the initial population is 4000 cells and it doubles after 2 hours, we can set up a proportion:
P_(0) = 4000 (initial population)
P_(2) = 2 × P_(0) = 2 × 4000 = 8000 (population after 2 hours)
Since the population doubles every 2 hours, the growth rate is constant. Therefore, we can express the relationship as:
P_(t) = P_(0) × 2{t/2}
So, the expression for the number of yeast cells after t hours is:
P_(t) = 4000 × 2^{t/2}
To find the number of yeast cells after 6 hours, substitute t = 6 into the expression:
P_(6) = 4000 × 2^{6/2}
P_(6) = 4000 × 2^3
P_(6) = 4000 × 8
P_(6) = 32000
So, after 6 hours, there are 32,000 yeast cells.
To find the rate at which the population of yeast cells is increasing at 6 hours, we need to find the derivative of the population function with respect to time and evaluate it at t = 6.
P_(t) = 4000 × 2^{t/2}
Taking the derivative with respect to t:
dP/dt = (4000/2) × ln(2) × 2^{t/2}
dP/dt = 2000 × ln(2) × 2^{t/2}
To find the rate of increase at t = 6:
dP/dt | t=6 = 2000 × ln(2) × 2^{6/2}
dP/dt | t=6 = 2000 × ln(2) × 2^3
dP/dt | t=6 = 2000 × ln(2)× 8
dP/dt | t=6 ≈ 11,418.3 cells per hour
Therefore, at 6 hours, the population of yeast cells is increasing at a rate of approximately 11,418.3 cells per hour.
To know more about expression:
https://brainly.com/question/15707979
#SPJ4
Classify the data of the number of customers at a restaurant. a. Statistics b. Classical c. Quantitative d. Qualitative
The data of the number of customers at a restaurant can be classified as Quantitative.
Quantitative data refers to numerical data that can be measured and analyzed using mathematical operations. In the case of the number of customers at a restaurant, it represents a numerical count or quantity, which can be subjected to mathematical calculations, such as finding the mean, median, or conducting statistical analysis.
The number of customers is a measurable quantity that provides information about the restaurant's popularity, customer flow, and overall business performance. Therefore, it falls under the category of quantitative data.
LEARN MORE ABOUT Quantitative here: brainly.com/question/32236127
#SPJ11
dante is solving the system of equations below. he writes the row echelon form of the matrix. which matrix did dante write?
Dante wrote the row echelon form of the matrix [3 0 2 | 5; 0 1 -2 | -3; 0 0 0 | 0], which represents a system of equations.
The row echelon form of a matrix is a simplified form obtained through a sequence of row operations. In this case, Dante wrote the matrix [3 0 2 | 5; 0 1 -2 | -3; 0 0 0 | 0], which consists of three rows and four columns. The first row represents the equation 3x + 0y + 2z = 5, the second row represents the equation 0x + y - 2z = -3, and the third row represents the equation 0x + 0y + 0z = 0.
The row echelon form is characterized by having leadings 1's in each row, with zeros below and above each leading 1. In this case, the leading 1's are in the first and second columns of the first and second rows, respectively. The third row contains all zeros, indicating a dependent equation.
Dante's matrix represents the row echelon form of the system of equations he is solving.
Learn more about row echelon here:
https://brainly.com/question/30403280
#SPJ11
Consider the multiple regression model. Show that the predictor that increases the difference SSE_r – SSE_f. when a new predictor is added in the model is the one having the greatest partial correlation with the response variable, given the variables in the model.
The predictor that increases the difference SSE_r – SSE_f when added to a multiple regression model is the one with the greatest partial correlation with the response variable.
If we consider the variables in the model, which predictor exhibits the highest partial correlation with the response variable, resulting in an increased difference between SSE_r and SSE_f when added to the multiple regression model?In multiple regression analysis, the SSE_r (Sum of Squares Error - reduced model) represents the variability in the response variable explained by the predictors already included in the model. The SSE_f (Sum of Squares Error - full model) represents the variability in the response variable when a new predictor is added. The difference between SSE_r and SSE_f indicates the additional variability explained by the new predictor. The predictor that increases this difference the most is the one with the greatest partial correlation with the response variable.
To understand why this is the case, we need to consider how partial correlation measures the strength and direction of the linear relationship between two variables while accounting for the influence of other predictors in the model. When a new predictor is added to the model, its partial correlation with the response variable reflects its unique contribution to explaining the variability in the response, independent of the other predictors. The predictor with the highest partial correlation will have the greatest impact on increasing the difference between SSE_r and SSE_f, as it explains a larger portion of the unexplained variability in the response variable.
In summary, the predictor that exhibits the greatest partial correlation with the response variable is the one that increases the difference between SSE_r and SSE_f the most when added to a multiple regression model. This indicates its significant contribution to explaining additional variability in the response variable beyond what is already captured by the existing predictors.
Learn more about: regression model
brainly.com/question/4515364
#SPJ11
Consider the function f(x) = 1/x?. We will consider its Taylor series at 101. Throughout this question, let b= 101. (a) Determine the values f(k)(b)/k! for every non-negative integer k (where b = 101). (b) For m > 0, write f(k) (6) Rm(x) = f(x) - (x – b)k. k! т = k=0 = Using Taylor's theorem, prove that if 101/2 < x < 202, then limmo |Rm(x)] = 0. (c) Prove that come f,(b) (x – b)* converges to f(x) if 101/2 < x < 202. (d) By considering the radius of convergence of a power series, or otherwise, prove that if x < 0 or 2 > 202, the series og f(x) (6) (x – b)k does not converge.
(a) The values of f^(k)(b)/k! for every non-negative integer k when b = 101 are given by (-1)^k / 101^(k+1).
(b) According to Taylor's theorem, if 101/2 < x < 202, then the remainder term Rm(x) approaches zero as m approaches infinity.
(c) For 101/2 < x < 202, the series of f^(k)(b)(x - b)^k converges to f(x).
(d) The series expansion of f(x) around x = 101 does not converge if x < 0 or x > 202.
(a) To find the values of f(k)(b)/k! for every non-negative integer k, let's start by calculating the derivatives of f(x) = 1/x.
f(x) = 1/x
f'(x) = -1/x^2
f''(x) = 2/x^3
f'''(x) = -6/x^4
f''''(x) = 24/x^5
...
From the pattern, we can see that the k-th derivative of f(x) can be written as:
f^(k)(x) = (-1)^(k) * k! / x^(k+1)
Now, substituting x = b = 101, we have:
f^(k)(b) = (-1)^(k) * k! / b^(k+1)
Dividing by k! to find f^(k)(b)/k!, we get:
f^(k)(b)/k! = (-1)^(k) / b^(k+1)
Therefore, the values of f^(k)(b)/k! for every non-negative integer k are:
f^(0)(b)/0! = 1/101
f^(1)(b)/1! = -1/101^2
f^(2)(b)/2! = 2/101^3
f^(3)(b)/3! = -6/101^4
f^(4)(b)/4! = 24/101^5
...
(b) Using Taylor's theorem, we can write the Taylor series expansion of f(x) centered at b = 101 as:
f(x) = f(b) + f'(b)(x - b) + (1/2!) * f''(b)(x - b)^2 + (1/3!) * f'''(b)(x - b)^3 + ...
In this case, f(b) = f(101) = 1/101. Let's focus on the remainder term Rm(x) after the k-th term:
Rm(x) = (1/(m + 1)!) * f^(m+1)(c)(x - b)^(m+1)
where c is some value between x and b.
If we assume that 101/2 < x < 202, then we have:
101 < x < 202
0 < x - 101 < 101
0 < (x - 101)/(101^2) < 1
Now, let's consider the remainder term Rm(x) and substitute the values:
|Rm(x)| = |(1/(m + 1)!) * f^(m+1)(c)(x - b)^(m+1)|
Since f^(m+1)(c) is a constant and (x - b)^(m+1) < 101^(m+1), we can write:
|Rm(x)| < |(1/(m + 1)!) * f^(m+1)(c)| * 101^(m+1)
Since f^(m+1)(c) is a constant and 101^(m+1) is also a constant, let's define K = |(1/(m + 1)!) * f^(m+1)(c)| * 101^(m+1), where K is a positive constant.
Therefore, we have:
|Rm(x)| < K
As m approaches infinity, K remains a constant, and hence the limit of |Rm(x)| as m approaches infinity is 0:
lim (m→∞) |Rm(x)| = 0
(c) To prove that f^(k)(b)(x - b)^k converges to f(x) if 101/2 < x < 202, we need to show that the remainder term Rm(x) approaches zero as m approaches infinity.
From part (b), we have already shown that lim (m→∞) |Rm(x)| = 0 when 101/2 < x < 202. Therefore, as m approaches infinity, the remainder term Rm(x) approaches zero, and thus the series converges to f(x).
(d) The function f(x) = 1/x is not defined for x = 0. Therefore, the series expansion around x = 101 will not converge for x < 0.
For x > 202, the function f(x) = 1/x is also not defined. Hence, the series expansion around x = 101 will not converge for x > 202.
Therefore, if x < 0 or x > 202, the series expansion of f(x) around x = 101 does not converge.
To learn more about Taylor's theorem visit : https://brainly.com/question/13264870
#SPJ11
coding theory
Show that the following codes are perfect:
(a) thecodesC=Fqn,
(b) the codes consisting of exactly one codeword (the zero vector in the case of linear
codes),
(c) the binary repetition codes of odd length, and
(d) the binary codes of odd length consisting of a vector c and the complementary vector
c with 0s and 1s interchanged.
In coding theory, a code with the property that every message word is always at a fixed distance from some codeword is said to be a perfect code.
In this context, we show that certain codes are perfect. Specifically, we prove that (a) the codes C = Fqn, (b) the codes consisting of exactly one codeword, (c) the binary repetition codes of odd length, and (d) the binary codes of odd length consisting of a vector c and the complementary vector c with 0s and 1s interchanged are all perfect.
To show that a code is perfect, we need to prove that every message of a particular size is at a fixed Hamming distance from a codeword. In the case of the codes C = Fqn, this property is clearly satisfied because the code consists of all possible n-tuples of elements from the field Fq, ensuring that every message is at a distance d = n from some codeword.
If a code consists of exactly one codeword, then the distance between each message and that codeword is either 0 (if the message equals the codeword) or 1 (otherwise). Hence, by definition, this code is perfect.
The binary repetition codes of odd length consist of all bit vectors with an odd number of ones or, equivalently, those that have an even Hamming weight. For any message of odd length, there exists exactly one codeword with weight equal to half the length of the message, and so the repetition code is perfect.
Finally, if we consider binary codes of odd length consisting of a vector c and its complementary vector with 0's and 1's interchanged, we note that every message is at a distance d= (n-1)/2 from either c or its complement. Thus, by definition, this code is also perfect
To learn more about binary code click brainly.com/question/28222245
#SPJ11
In coding theory, a code with the property that every message word is always at a fixed distance from some codeword is said to be a perfect code.
In this context, we show that certain codes are perfect. Specifically, we prove that (a) the codes C = Fqn, (b) the codes consisting of exactly one codeword, (c) the binary repetition codes of odd length, and (d) the binary codes of odd length consisting of a vector c and the complementary vector c with 0s and 1s interchanged are all perfect.
To show that a code is perfect, we need to prove that every message of a particular size is at a fixed Hamming distance from a codeword. In the case of the codes C = Fqn, this property is clearly satisfied because the code consists of all possible n-tuples of elements from the field Fq, ensuring that every message is at a distance d = n from some codeword.
If a code consists of exactly one codeword, then the distance between each message and that codeword is either 0 (if the message equals the codeword) or 1 (otherwise). Hence, by definition, this code is perfect.
The binary repetition codes of odd length consist of all bit vectors with an odd number of ones or, equivalently, those that have an even Hamming weight. For any message of odd length, there exists exactly one codeword with weight equal to half the length of the message, and so the repetition code is perfect.
Finally, if we consider binary codes of odd length consisting of a vector c and its complementary vector with 0's and 1's interchanged, we note that every message is at a distance d= (n-1)/2 from either c or its complement. Thus, by definition, this code is also perfect
To learn more about binary code click brainly.com/question/28222245
#SPJ11
use cylindrical coordinates. evaluate E √x²+y² dV, where e is the region that lies inside the cylinder x²+y² = 1 and between the planes z = −2 and z = 5.
The expression becomes ∫∫∫E √(x² + y²) dV = ∫₀^1 ∫₀^(2π) ∫₋₂^5 r² dz dθ dr.
To evaluate the expression ∫∫∫E √(x² + y²) dV in cylindrical coordinates, we need to express the bounds of integration and the differential volume element in terms of cylindrical coordinates.
The region E is defined as the region inside the cylinder x² + y² = 1 and between the planes z = -2 and z = 5.
In cylindrical coordinates, the equation of the cylinder can be expressed as r² = 1, where r is the radial distance from the z-axis. The bounds for r can be set as 0 ≤ r ≤ 1.
The region E is bounded by the planes z = -2 and z = 5. Therefore, the bounds for z can be set as -2 ≤ z ≤ 5.
For the angular variable θ, since the region E is symmetric about the z-axis, we can integrate over the entire range 0 ≤ θ ≤ 2π.
Now, let's express the differential volume element dV in cylindrical form. In Cartesian coordinates, dV = dx dy dz, but in cylindrical coordinates, we have dV = r dr dθ dz.
Using these bounds and the differential volume element, the expression becomes:
∫∫∫E √(x² + y²) dV = ∫₀^1 ∫₀^(2π) ∫₋₂^5 √(r²) r dz dθ dr.
Simplifying further, we have:
∫∫∫E √(x² + y²) dV = ∫₀^1 ∫₀^(2π) ∫₋₂^5 r² dz dθ dr.
Performing the integration in the specified order, we can find the numerical value of the expression.
Learn more about expression here
https://brainly.com/question/1859113
#SPJ11
In a recent National Survey of Drug Use and Health, 2312 of 5914 randomly selected full-time US college students were classified as binge drinkers.
If we were to calculate a 99% confidence interval for the true population proportion p that are all binge drinkers, what would be the lower limit of the confidence interval? Round your answer to the nearest 100th, such as 0.57 or 0.12. (hint: use Stat Crunch to calculate the confidence interval).
The lower limit of the 99% confidence interval for the true population proportion of binge drinkers cannot be determined without additional information.
To calculate the lower limit of the 99% confidence interval for the true population proportion of binge drinkers, we need to know the sample proportion and the sample size. While the information provided states that 2312 out of 5914 randomly selected full-time US college students were classified as binge drinkers, we don't have the specific sample proportion.
Additionally, the margin of error is required to calculate the confidence interval. Without these values or the methodology used to calculate the interval, we cannot determine the lower limit. It is important to note that the confidence interval is influenced by the sample size, sample proportion, and the desired level of confidence. Without more information, we cannot compute the lower limit of the confidence interval.
Learn more about Population here: brainly.com/question/15889243
#SPJ11
The number of short-term parking spaces at 15 airports is shown.
750 3400 1962 700 203
900 8662 260 1479 5905
9239 690 9822 1131 2516
Calculate the standard deviation of the data
To calculate the standard deviation of the given data representing the number of short-term parking spaces at 15 airports, we can use the formula for standard deviation.
Calculate the mean: Add up all the values and divide by the number of data points.
Mean = (750 + 3400 + 1962 + 700 + 203 + 900 + 8662 + 260 + 1479 + 5905 + 9239 + 690 + 9822 + 1131 + 2516) / 15 = 3932.2
Calculate the deviation from the mean for each data point: Subtract the mean from each data point.
Deviations = (750 - 3932.2, 3400 - 3932.2, 1962 - 3932.2, 700 - 3932.2, 203 - 3932.2, 900 - 3932.2, 8662 - 3932.2, 260 - 3932.2, 1479 - 3932.2, 5905 - 3932.2, 9239 - 3932.2, 690 - 3932.2, 9822 - 3932.2, 1131 - 3932.2, 2516 - 3932.2)
Square each deviation: Square each of the obtained deviations.
Squared deviations = (deviation[tex]1^2[/tex], deviation[tex]2^2[/tex], deviation[tex]3^2[/tex], ..., deviation[tex]15^2[/tex])
Calculate the variance: Add up all the squared deviations and divide by the number of data points.
Variance = ([tex]deviation1^2 + deviation2^2 + deviation3^2 + ... + deviation15^2[/tex]) / 15
Calculate the standard deviation: Take the square root of the variance.
Standard deviation = √Variance
By following these steps, you can calculate the standard deviation of the given data.
Learn more about variance here:
https://brainly.com/question/31630096
#SPJ11
A payment of $990 scheduled to be paid today and a second payment of $1,280 to be paid in eight months from today are to be replaced by a single equivalent payment.
What total payment made today would place the payee in the same financial position as the scheduled payments if money can earn 2.25%? (Do not round intermediate calculations and round your final answer to 2 decimal places.)
The equivalent single payment made today that would place the payee in the same financial position as the scheduled payments, considering an interest rate of 2.25%, is the calculated equivalent payment.
To find the equivalent single payment, we need to consider the time value of money and calculate the present value of both payments.
For the first payment of $990, since it is due today, the present value is equal to the payment itself.
For the second payment of $1,280 due in eight months, we need to discount it to the present value using the interest rate of 2.25%. We can use the formula for present value of a future payment:
PV = FV / (1 + r)^n
where PV is the present value, FV is the future value, r is the interest rate, and n is the number of periods.
Using this formula, we can calculate the present value of the second payment:
PV2 = 1280 / (1 + 0.0225)^8
Now, we can find the equivalent single payment by adding the present values of both payments:
Equivalent payment = PV1 + PV2
Finally, we round the final answer to two decimal places.
Therefore, the equivalent single payment made today that would place the payee in the same financial position as the scheduled payments, considering an interest rate of 2.25%, is the calculated equivalent payment.
Know more about Payment here:
https://brainly.com/question/32320091
#SPJ11
(1 point) A random sample of 8 size AA batteries for toys yield a mean of 3.79 hours with standard deviation, 1.32 hours. (a) Find the critical value, t*, for a 99% Cl. t* = (b) Find the margin of err
(a) The critical value (t*) for a 99% confidence level is t* = 3.499.
(b) The margin of error for a 99% confidence interval is approximately 1.633.
To solve the problem step by step, we'll use the provided information to find the critical value (t*) for a 99% confidence level (CL) and the margin of error for a 99% confidence interval (CI).
(a) Find the critical value, t*, for a 99% confidence level (CL):
Step 1: Determine the confidence level (CL). In this case, it is 99%, which corresponds to a significance level of α = 0.01.
Step 2: Determine the degrees of freedom (df). Since we have a sample size of 8, the degrees of freedom is given by df = n - 1 = 8 - 1 = 7.
Step 3: Find the critical value, t*, using a t-distribution table or statistical software. The critical value is the value that separates the middle 99% of the t-distribution. For a two-tailed test with α = 0.01 and 7 degrees of freedom, the critical value is approximately t* = 3.499.
Therefore, the critical value (t*) for a 99% confidence level is t* = 3.499.
(b) Find the margin of error for a 99% confidence interval (CI):
Step 1: Calculate the standard error (SE) using the formula: SE = (standard deviation) / √(sample size).
Given that the standard deviation is 1.32 hours and the sample size is 8, we have SE = 1.32 / √8 = 0.4668.
Step 2: Determine the margin of error (ME) by multiplying the standard error by the critical value: ME = t* × SE.
Using the previously calculated critical value (t* = 3.499) and the standard error (SE = 0.4668), we have ME = 3.499 × 0.4668 = 1.633.
Therefore, the margin of error for a 99% confidence interval is approximately 1.633.
Learn more about the critical value at
https://brainly.com/question/32607910
#SPJ4
The question is -
A random sample of 8-size AA batteries for toys yields a mean of 3.79 hours with a standard deviation, of 1.32 hours.
(a) Find the critical value, t*, for a 99% Cl. t* = ________
(b) Find the margin of error for a 99% CI. _________
Last yel percentile 12,000 students took an entrance exam at a certain state university. Tammy's score was at the 83" Retentie. Greg's score was at the 45" X 2 (a) Which of the following must be true about Tammy's score? About 83% of the students who took the exam scored lower than Tommy Tommy got about 83% of the questions correct. Tammy's score was in the bottom half of all scores, Tainmy missed 17 questions (b) Which of the following must be true about Tammy's and Greg's scores? Both Tammy and Greg scored higher than the median Both Tommy and Greg scored below than the median Tammy scored higher than Greg Greg scored higher than Tammy.
a) The correct statement about Tommy's score is given as follows:
About 83% of the students who took the exam scored lower than Tommy.
b) The correct statement about Tommy's and Greg's scores is given as follows:
Tammy scored higher than Greg.
What is a percentile?A measure is said to be in the xth percentile of a data-set if it the bottom separator of the bottom x% of measures of the data-set and the top (100 - x)% of measures, that is, it is greater than x% of the measures of the data-set.
Hence:
Tommy's score is at the 83th percentile -> better than 83% of the students -> above the median, which is the 50th percentile.Greg's score is at the 45th percentile -> better than 45% of the students -> below the median, which is the 50th percentile.More can be learned about percentiles at brainly.com/question/22040152
#SPJ4