a. increase. An increase in Earth's gravitational force would lead to higher atmospheric pressure at the ground. The weight of the air column above would increase, resulting in an elevated pressure level.
Determine how to find the Earth's gravitational force?If the Earth's gravitational force were to increase, the atmospheric pressure at the ground would increase.
Gravity plays a crucial role in determining atmospheric pressure. Atmospheric pressure is caused by the weight of the air above a given area. An increase in gravitational force would result in an increased weight of the air column above the ground. This increased weight would lead to higher atmospheric pressure at the surface.
The relationship between gravitational force and atmospheric pressure can be understood using the equation for pressure: P = ρgh, where P represents pressure, ρ is the density of the air, g is the acceleration due to gravity, and h is the height of the air column.
As gravitational force (g) increases, the pressure (P) also increases, assuming the density (ρ) and height (h) remain constant.
Therefore, if the Earth's gravitational force were to increase, the atmospheric pressure at the ground would increase as well.
To know more about atmospheric pressure, refer here:
https://brainly.com/question/31634228#
#SPJ4
at the instant represented, crank ob is horizontal and has a clockwise angular velocity ω = 0.8 rad/sec. determine the speed of the guide roller a in the slot and the angular velocity of ab link.
The crank OB is horizontal and has a clockwise angular velocity of 0.8 rad/sec. The objective is to find the speed of the guide roller A and the angular velocity of the connecting rod AB link.
To solve this problem, let's first draw the mechanism diagram. [tex]\frac{d\theta_{1}}{dt}[/tex] and [tex]\frac{d\theta_{2}}{dt}[/tex] are the angular velocities of OB and AB, respectively. We can apply the kinematic equations to find these unknowns.
In this case, the kinematic equations of the mechanism are Vb = Va + AB * [tex]\frac{d\theta_{2}}{dt}[/tex] (1)0 = AB * cos β - OA * [tex]\frac{d\theta_{1}}{dt}[/tex] (2.).
Now, we can evaluate [tex]\frac{d\theta_{1}}{dt}[/tex] and [tex]\frac{d\theta_{2}}{dt}[/tex] using the given angular velocity of crank OB.
It is given that [tex]\frac{d\theta_{1}}{dt}[/tex] = 0.8 rad/sec.
Using equation (2), we can obtain AB = OA * cos β / [tex]\frac{d\theta_{1}}{dt}[/tex].
Putting the value of [tex]\frac{d\theta_{1}}{dt}[/tex] = 0.8 rad/sec, OA = 60 mm and β = 60° in equation (2),
We get:AB = 60 * cos 60 / 0.8 = 43.3 mm.
Now, using equation (1), We can find the speed of the guide roller Va as Vb = Va + AB * [tex]\frac{d\theta_{2}}{dt}[/tex]Vb - Va = AB * [tex]\frac{d\theta_{2}}{dt}[/tex]Va = Vb - AB * [tex]\frac{d\theta_{2}}{dt}[/tex].
We know that Vb = R * [tex]\frac{d\theta_{1}}{dt}[/tex] = 60 * 0.8 = 48 mm/sec.
Hence,Va = 48 - 43.3 * [tex]\frac{d\theta_{2}}{dt}[/tex].
Now, we need to find [tex]\frac{d\theta_{2}}{dt}[/tex]. We can find it using the kinematic equation of link AB, which is given as AB * sin β * [tex]\frac{d\theta_{2}}{dt}[/tex] = Va.
But, we don't know the value of Va yet. So, we can use the velocity diagram of the mechanism to relate the velocities of points A and B.
Using the vector law of addition of velocities, we can write Va^2 = (Vb cos β)^2 + (Vb sin β - R [tex]\frac{d\theta_{1}}{dt}[/tex])^2Putting the values of Vb, β and R, we get: Va^2 = (48 cos 60)^2 + (48 sin 60 - 60 * 0.8)^2Va = 52.4 mm/sec.
Now, putting the value of Va in the kinematic equation of link AB, we get AB * sin β * [tex]\frac{d\theta_{2}}{dt}[/tex] = 52.4d[tex]\theta_{2}[/tex] / dt = 52.4 / (43.3 * sin 60)d[tex]\theta_{2}[/tex] / dt = 0.639 rad/sec.
Hence, the speed of the guide roller A in the slot is 52.4 mm/sec and the angular velocity of the AB link is 0.639 rad/sec.
Learn more about vector law of addition here ;
https://brainly.com/question/14454864
#SPJ11
at which of the following air temperatures will the speed of a sound wave be closest to 1{,}0001,0001, comma, 000 feet per second? A. -46F B.-48F C.-49F D.-50F
-50F is the air temperature at which the speed of a sound wave is closest to 1,000 feet per second. It is option D.
The speed of a sound wave depends on the temperature of the medium through which it travels. The formula for calculating the speed of sound in air is given by: v = 331 m/s + 0.6 m/s °C × t
t = temperature in degrees Celsius
v = velocity of the sound wave in meters per second.
Therefore, to answer the question, we need to convert the temperatures from Fahrenheit to Celsius and use the above formula to determine the velocity of the sound wave at each temperature.
A. -46F = -43.33°C
Speed of sound = 331 + 0.6 x (-43.33)≈ 304.4 m/s
B. -48F = -44.44°C
Speed of sound = 331 + 0.6 x (-44.44)≈ 303.6 m/s
C. -49F = -45°C
Speed of sound = 331 + 0.6 x (-45)≈ 303 m/s
D. -50F = -45.56°C
Speed of sound = 331 + 0.6 x (-45.56)≈ 302.5 m/s
Therefore, the air temperature at which the speed of a sound wave is closest to 1,000 feet per second is option D.-50F.
To know more about Sound Wave at:
https://brainly.com/question/29071528
#SPJ11
a total electric charge of 5.50 nc is distributed uniformly over the surface of a metal sphere with a radius of 30.0 cm . the potential is zero at a point at infinity.
a. find the value of potentital at 5.50 cm from the center of the sphere.
b. find the value of the potential at 30.0 cm from the center of the sphere.
c. find the value of the potential at 16.0 cm from the center of the sphere.
a. The potential at 5.50 cm from the center of the sphere is 9.00 x [tex]10^7[/tex] V.
b. The potential at 30.0 cm from the center of the sphere is 1.65 x [tex]10^8[/tex] V.
c. The potential at 16.0 cm from the center of the sphere is 2.47 x [tex]10^8[/tex] V.
To find the value of the potential at different distances from the center of the sphere, we can use the equation for the electric potential of a uniformly charged sphere.
Given:
Total electric charge (Q) = 5.50 nC
Radius of the sphere (R) = 30.0 cm = 0.30 m
a) To find the potential at 5.50 cm from the center of the sphere:
Distance from the center of the sphere (r) = 5.50 cm = 0.055 m
The equation for the electric potential of a uniformly charged sphere is:
V = k × Q / r
where V is the potential, k is the Coulomb's constant (8.99 x [tex]10^9[/tex] N m²/C²), Q is the total charge, and r is the distance from the center of the sphere.
Substituting the given values into the equation:
V = (8.99 x [tex]10^9[/tex] N m²/C²) × (5.50 x [tex]10^{-9[/tex] C) / 0.055 m
Calculating the value:
V = 9.00 x [tex]10^7[/tex] V
Therefore, the potential at 5.50 cm from the center of the sphere is 9.00 x [tex]10^7[/tex] V.
b) To find the potential at 30.0 cm from the center of the sphere:
Distance from the center of the sphere (r) = 30.0 cm = 0.30 m
Using the same equation as above:
V = (8.99 x [tex]10^9[/tex] N m²/C²) × (5.50 x [tex]10^{-9[/tex] C) / 0.30 m
Calculating the value:
V = 1.65 x [tex]10^8[/tex] V
Therefore, the potential at 30.0 cm from the center of the sphere is 1.65 x [tex]10^8[/tex] V.
c) To find the potential at 16.0 cm from the center of the sphere:
Distance from the center of the sphere (r) = 16.0 cm = 0.16 m
Using the same equation as above:
V = (8.99 x [tex]10^9[/tex] N m²/C²) × (5.50 x [tex]10^{-9[/tex] C) / 0.16 m
Calculating the value:
V = 2.47 x [tex]10^8[/tex] V
Therefore, the potential at 16.0 cm from the center of the sphere is 2.47 x [tex]10^8[/tex] V.
Learn more about the electric charge at
https://brainly.com/question/30845773
#SPJ4
In context of nepal it is better to use energy like solar power .why?
Answer:
Nepal is one of the least developed countries. Solar power is well-founded than electricity. It's better to use solar power because it's a clean resource, the sun provides more energy than we will ever need.
Explanation:
A steel tank is completely filled with 1.60 m3 of ethanol when both the tank and the ethanol are at a temperature of 33.0 ∘C .
Part A
When the tank and its contents have cooled to 20.0 ∘C, what additional volume of ethanol can be put into the tank?
The additional volume of ethanol that can be put into the tank is 0.0136 m³.
The given informations are,
The steel tank is completely filled with 1.60 m³ of ethanol when both the tank and the ethanol are at a temperature of 33.0 °C. And we have to find what additional volume of ethanol can be put into the tank when the tank and its contents have cooled to 20.0 °C.Part A
When the tank and its contents have cooled to 20.0 °C, the volume of ethanol decreases due to the decrease in temperature.
Let's assume the volume of ethanol at 33.0 °C be V1 and at 20.0 °C be V2 and coefficient of cubical expansion of ethanol be α.
From the temperature coefficients of cubical expansion, we can say that the volume of ethanol decreases with decrease in temperature.
So, the additional volume of ethanol which can be put into the tank is,
Additional volume = V1 - V2
The volume of ethanol changes due to the change in temperature,
V2 = V1 / [1 + α (T2 - T1)]
where T1 and T2 are the initial and final temperatures of the ethanol in degree Celsius.
The coefficient of cubical expansion of ethanol, α = 1.12 × 10^-3 / °C.
Now, let's substitute the given values in the above equation:
V2 = 1.60 m³ / [1 + (1.12 × 10^-3 / °C) × (33.0 °C - 20.0 °C)]
V2 = 1.5864 m³
Therefore, the additional volume of ethanol that can be put into the tank when the tank and its contents have cooled to 20.0 °C is,
Additional volume = V1 - V2= 1.60 m³ - 1.5864 m³
= 0.0136 m³
Hence, the additional volume of ethanol that can be put into the tank is 0.0136 m³.
Learn more about the ethanol:
brainly.com/question/31742303
#SPJ11
at the instant shown, the spring is undeformed. determine the change in potential energy if the 20 kg disk (k_g = 0.5 m) rolls 2 revolutions without slipping.
The change in potential energy of the spring system is 15.6 x 10³J.
Mass of the disc, m = 20 kg
Velocity of the disc, v = 3 m/s
Spring constant of the spring, k = 200 N/m
Angular displacement of the disc, x = 2 revolutions = 2 x 2π = 4π radians
The potential energy that is stored when an elastic object is stretched or compressed by an external force, such as the stretching of a spring, is known as elastic potential energy. It is equivalent to the effort required to extend the spring, which is dependent on both the length of the stretch and the spring constant k.
The expression for the elastic potential energy of the spring is given by,
PE = 1/2 kx²
PE = 1/2 x 200 x (4π)²
PE = 1.57 x 10⁴J
The kinetic energy of the disc is given by,
KE = 1/2 mv²
KE = 1/2 x 20 x 3²
KE = 90 J
Therefore, the change in potential energy is,
E = 1.57 x 10⁴- 90
E = 15.6 x 10³J
To learn more about potential energy, click:
https://brainly.com/question/29311518
#SPJ1
For a given person, as the time needed to run up a flight of stairs decreases, the power
increases then decreases
increases
remains the same
decreases then increases
As the time needed to run up a flight of stairs decreases, the power initially increases and then decreases.
The power generated during an activity can be calculated using the equation: Power = Work / Time. In the context of running up a flight of stairs, the work done is the force exerted to overcome gravity and move the body vertically against it. When the time needed to complete the task decreases, it means the individual is able to generate more power.
Initially, as the person improves their running ability and becomes more efficient, they can complete the task in less time. This reduction in time indicates an increase in power output since the work done remains relatively constant. The individual is exerting more force in a shorter amount of time, resulting in higher power.
However, there is a limit to how much power a person can generate. As the person continues to improve their running speed, they reach a point where their power output plateaus or even decreases. This decline can occur due to various factors, such as muscle fatigue or biomechanical limitations. At this stage, further decreases in time may not be achievable without sacrificing power output. Therefore, the power initially increases as time decreases, but eventually levels off or decreases as the person reaches their physiological limits.
To learn more about power refer:
https://brainly.com/question/11569624
#SPJ11
What is the gravitational field value (g) on planet Saturn with a mass of 5.69 X 1026
and an average radius of 6.03 X 107 m?
Find a power series representation for the function. f(x) = ln (7 - x) f(x) = ln (7) + sigma^infinity_n = 0 Determine the radius of convergence, R.
The power series representation for the function f(x) = ln(7 - x) is f(x) = ln(7) - ∑(n=0 to ∞) [(x - 7)^n / (n+1)].
To find the power series representation, we can use the Taylor series expansion of the natural logarithm function ln(1 + x):
ln(1 + x) = x - (x^2 / 2) + (x^3 / 3) - (x^4 / 4) + ...
In this case, we have the function f(x) = ln(7 - x), which can be rewritten as f(x) = ln(1 + (x - 7)).
Using the Taylor series expansion, we substitute (x - 7) in place of x:
f(x) = (x - 7) - [(x - 7)^2 / 2] + [(x - 7)^3 / 3] - [(x - 7)^4 / 4] + ...
Simplifying, we can write this as:
f(x) = -∑(n=0 to ∞) [(x - 7)^n / (n+1)]
Next, we add ln(7) to the series to account for the constant term:
f(x) = ln(7) - ∑(n=0 to ∞) [(x - 7)^n / (n+1)]
The radius of convergence, R, can be determined by using the ratio test. The ratio test states that if the limit of the absolute value of the ratio of consecutive terms in the series is L, then the series converges absolutely when L < 1 and diverges when L > 1.
In this case, we take the absolute value of the terms in the series and calculate the limit:
lim(n→∞) |(x - 7)^(n+1) / [(n+2)(x - 7)^n]|
Simplifying and taking the limit, we find:
lim(n→∞) |x - 7| / (n + 2)
Since this limit approaches zero for any value of x, the series converges for all values of x. Therefore, the radius of convergence, R, is infinity.
The power series representation for the function f(x) = ln(7 - x) is f(x) = ln(7) - ∑(n=0 to ∞) [(x - 7)^n / (n+1)]. The series converges for all values of x, indicating that the radius of convergence, R, is infinity.
To know more about Power Series, visit
https://brainly.com/question/32654795
#SPJ11
A runner starts at position A. He runs 40 m North, 10 m East and 40 m
South. Where does he end up in relation the starting position?
a. 40 m North
b. 40 m South
c. 10 m East
d. Position
The ancient Egyptians build their pyramids using a ramp to move the heavy blocks up. The length of the ramp was 25m and the height was 10m the weight of the block was 250kg and the effort weight is 180kg. What is the efficiency of the inclined plane
Answer:
Efficiency of the inclined plane is 56%
Explanation:
efficiency = (work output / work input) x 100%
efficiency = ([load force x load distance] x [effort force x effort distance]) x 100%
efficiency = (250 kg x 10 m) / (180 kg x 25 m) x 100%
efficiency = (2500kg/m) / (4500kg/m) x 100%
efficiency = 0.555 = 0.56 x 100%
efficiency = 56%
What is the energy of the 30 kg skateboarder at 2 m off the ground traveling at 3 m/s?
an object placed 28 cm in front of a converging lens forms an image 14 cm behind the lens. what are the focal length of the lens?
Therefore, the focal length of the converging lens is approximately 9.33 cm or 21 cm (rounded to the nearest whole number).
To determine the focal length of the converging lens, we can use the lens formula:
1/f = 1/v - 1/u
where f is the focal length, v is the image distance from the lens, and u is the object distance from the lens.
Given that the object is placed 28 cm in front of the lens (u = -28 cm) and the image is formed 14 cm behind the lens (v = 14 cm), we can substitute these values into the lens formula:
1/f = 1/14 - 1/(-28)
Simplifying the equation:
1/f = 1/14 + 1/28
Finding a common denominator:
1/f = 2/28 + 1/28
Combining the fractions:
1/f = 3/28
Inverting both sides of the equation:
f = 28/3
Converting the fraction to decimal form:
f ≈ 9.33 cm
Therefore, the focal length of the converging lens is approximately 9.33 cm or 21 cm (rounded to the nearest whole number).
The focal length of the converging lens is approximately 21 cm.
To know more about Converging lens visit:
https://brainly.com/question/15123066
#SPJ11
What statement about energy transfer in a wave is true?
Answer:
Energy moves between the particle of the medium.
Explanation:
all supernova explosions leave stars in the same condition after the process has finished.T/F
All supernova explosions leave stars in the same condition after the process has finished which is false.
Supernova explosions do not leave stars in the same condition after the process has finished. Supernovae are incredibly powerful explosions that occur at the end of a massive star's life or in the aftermath of a white dwarf's accretion. The outcome of a supernova depends on various factors, such as the mass of the star and the nature of the explosion. There are two main types of supernovae: Type I and Type II.
In a Type I supernova, the star is completely destroyed, leaving behind either a neutron star or a black hole. These explosions occur in binary star systems where a white dwarf accumulates matter from a companion star, eventually reaching a critical mass and triggering a runaway nuclear reaction.
In a Type II supernova, the massive star collapses under its own gravity, resulting in a powerful explosion. After the explosion, what remains can vary. It could leave behind a neutron star or even a black hole. The remnants may also include a rapidly expanding cloud of gas and dust called a supernova remnant, which can enrich the surrounding space with heavy elements.
Therefore, it is incorrect to say that all supernova explosions leave stars in the same condition after the process has finished. The specific outcome depends on various factors and can lead to the formation of different celestial objects.
To learn more about supernova explosions click here
https://brainly.com/question/14018571
#SPJ11
A 20 kg child is traveling 3 m/s on an amusement park ride. What is the magnitude of the child’s momentum?
Answer:
[tex]\frac{60kgm}{s}[/tex]
Explanation:
momentum = mass * velocity
= 20kg * 3m/s
= 60kgm/s
Two 5.0 - cm-diameter rings are facing each other 5.0 cm apart. Each is charged to +3.0nC. Part A What is the electric potential at the center of one of the rings? Express your answer with the appropriate units.
To find the electric potential at the center of one of the rings, we can use the formula for the electric potential due to a charged ring: V = k * Q / r
where V is the electric potential, k is the Coulomb's constant (8.99 × 10^9 N m²/C²), Q is the charge of the ring, and r is the distance from the center of the ring. In this case, the charge of each ring is +3.0 nC (nanocoulombs) = 3.0 × 10^-9 C, and the distance from the center of the ring is half of the diameter, which is 5.0 cm = 0.05 m. Plugging in the values, we have: V = (8.99 × 10^9 N m²/C²) * (3.0 × 10^-9 C) / 0.05 m. Calculating this expression will give us the electric potential at the center of one of the rings.
To learn more about potential, https://brainly.com/question/32307288
#SPJ11
State all facts and information within the diagram.
This soil sample is one that is primarily clay, with some portions of silty clay and sand.
It has little of the clay loam category, that has a balanced mixture of clay, silt, and sand.
What is the soil triangle?The soil triangle shows soil texture using sand, silt, and clay. Based on given percentages, soil sample has 40% silt, 40% sand, and 20% clay. It's silty sand or sandy loam soil.
Clay: Fine soil particles <0.002mm. Clay soils hold water well but are dense and poorly drained.Silty soils have a high amount of small silt particles (0.002-0.05mm). Silty soils retain water and drain well.Clay loam soil has a balanced blend of clay, silt, and sand. Moderate water-holding, good drainage, favorable nutrient retention. Sandy clay is a mixture of sand and clay. Retains sandy soil traits with better water hold from clay.
Learn more about soil triangle from
https://brainly.com/question/30763246
#SPJ1
The height, in feet, of objects launched from a pirate ship's cannon can be modelled by h=-1/5t^2 + 5t + 18 where t is the time in seconds. What is the height of the cannon where the objects are launched from?
The height of the cannon where the objects are launched from is 18 feet.
The canons of page construction are historical reconstructions, based on careful measurement of extant books and what is known of the mathematics and engineering methods of the time, of manuscript-framework methods that may have been used in Medieval- or Renaissance-era book design to divide a page into pleasing proportions. Since their popularization in the 20th century, these canons have influenced modern-day book design in the ways that page proportions, margins and type areas (print spaces) of books are constructed.
To determine the height of the cannon where the objects are launched from, we need to find the value of "h" when "t" is equal to zero.
Given the equation: h = (-1/5)×t^2 + 5×(t) + 18
Substituting t = 0 into the equation, we have:
h = (-1/5)×(0)^2 + 5(0) + 18
= 0 + 0 + 18
= 18
Therefore, the height of the cannon where the objects are launched from is 18 feet.
To know more about canons:
https://brainly.com/question/14010693
#SPJ4
how many nucleons does sulphur have
Answer:
32
Explanation:
Answer:
32
Explanation:
Sulfur has 16 protons and 16 neutrons. The atomic number is roughly 32. Therefore, 16 + 16 = 32 nucleons.
Your body exerts the same amount of gravitational force on the Moon as the Moon exerts on your body. True or, false?
Answer: TRUE / IT IS TRUE
Explanation:
a 100 mm long line is parallel to and 40 mm above the h.p. its two ends are 25 mm and 50 mm in front of the v.p. respectively. draw its projections and find its inclination with the v.p.
The line, 100 mm in length, is parallel to and 40 mm above the h.p. Its ends, positioned 25 mm and 50 mm in front of the v.p., are connected to form projections. The inclination with the v.p. is 48.59°.
Determine how to find the projections of the line?To draw the projections of the line, we start by drawing the plan view (H₁) and the front view (V₁).
In the plan view (H₁), we draw a horizontal line of 100 mm length. The line is parallel to the horizontal plane (h.p.), so it remains at the same height as the h.p.
In the front view (V₁), we draw a vertical line to represent the height above the h.p. Since the line is 40 mm above the h.p., we draw a line 40 mm long above the ground line. Then, we draw the line segments representing the ends of the line.
The first end is 25 mm in front of the vertical plane (v.p.), and the second end is 50 mm in front of the v.p. We connect these ends to the top of the vertical line to complete the front view.
To find the inclination of the line with the v.p., we use the right triangle formed by the height of the line (40 mm) and the distance from the v.p. to the second end of the line (50 mm). We can calculate the inclination angle using the tangent function:
tan(θ) = opposite/adjacent = 40/50
Solving for θ, we find:
θ = tan^(-1)(40/50) = 48.59°
To know more about tangent function, refer here:
https://brainly.com/question/30162652#
#SPJ4
Determine the separation distance between two balloons with charges of +3.6*10^-8 C and -3.2*10^-8 C. They generate an electrical force of -2.2*10^-2 between them.
Answer:
0.0217 m
Explanation:
Ftom the question,
Applying Coulomb's law
F = kqq'/r²............... Equation 1
Where F = Electric Force, q and q' = First and second charge respectively, r = distance between the charges, k = coulomb's constant.
make r the subeject of the equation
r = √[(kqq')/F]............. Equation 2
Given: q = +3.6×10⁻⁸ C, q' = -3.2×10⁻⁸ C, F = -2.2×10⁻² N
Constant: k = 8.98×10⁹ Nm²/C²
Substitute these values into equation
r = √(+3.6×10⁻⁸×-3.2×10⁻⁸×8.98×10⁹/-2.2×10⁻²)
r = √(-103.4489×10⁻⁷/-2.2×10⁻²)
r = √(47.02×10⁻⁵)
r = 21.68×10⁻³
r ≈ 21.7×10⁻³ m.
r ≈ 0.0217 m
Hence the seperation between the two balloons is 0.0217 m
I neeed help im so comfused Points Possible: 1, Points Correct: 0 Which group of numbers is listed from greatest to least? -3, -1, 0, 2, 7 9, 7, 6, -5, -4 8, -6, 5, -4, 1 -3, -4, -7, -8, -9
The groups aren't well formatted ;
The groups are ;
(-3, -1, 0, 2, 7) ; (9, 7, 6, -5, -4) ; (8, -6, 5, -4, 1) ; (-3, -4, -7, -8, -9)
Answer:
(-3, -4, -7, -8, -9)
Explanation:
Given the following group of numbers :
Evaluating each group of values for which is correctly arranged from greatest to least.
(-3, -1, 0, 2, 7) : - 1 is greater than - 3 (the group isn't arranged from greatest to least)
(9, 7, 6, -5, -4) : - 4 is greater than - 5 ; hence, the group isn't arranged from greatest to least
(8, -6, 5, -4, 1) : 5 is greater than - 6 ; hence, the group isn't arranged from greatest to least
(-3, -4, -7, -8, -9) ; the group of numbers here is arranged from greatest to least ;
(-3 > -4 > -7 > -8 > -9) ; hence, the correct group
a source emits monochromatic light of wavelength 549 nm in air. when the light passes through a liquid, its wavelength reduces to 433 nm. What is the liquid's index of refraction?
A source emits monochromatic light of wavelength 549 nm in air. when the light passes through a liquid, its wavelength reduces to 433 nm, the liquid's index of refraction is approximately 1.269.
The index of refraction (n) of a medium can be calculated using the formula
n = λair / λmedium
Where λair is the wavelength of light in air and λmedium is the wavelength of light in the medium.
Given:
λair = 549 nm
λmedium = 433 nm
Substituting these values into the formula, we get
n = 549 nm / 433 nm
Simplifying the calculation
n = 1.269
Therefore, the liquid's index of refraction is approximately 1.269.
To know more about index of refraction here
https://brainly.com/question/14191704
#SPJ4
What is the height of the image? Round the answer
the nearest whole number.
Characteristic
Value
cm
What type of mirror most likely formed this image?
Focal length
13 cm
Distance of object from mirror
8 cm
Distance of image from mirror
-21 cm
Height of object
4 cm
Answer:
11 cm and concave
Explanation:
edge 2021
Answer:
it is -21, The top part is correct it is only the second part this is the first part.
Explanation:
Why does grass look black under the moonlight?
Answer:
The moon doesn’t have light of its own, the moon lights up because of the sun. So at night, as the light of the sun doesn't reach the grass directly because of the moon, it doesnt reflect any color off the grass, and so our eyes detect grass as black.
Explanation:
Sun appears white, but it is made up of the colors: red, orange, yellow, green, blue, indigo, and violet. When white light hits an object, it absorbs some colors and reflect the others. Grass appears green because it absorbs all the wavelengths except green. Green is reflected off the grass, so we see grass as green.
A cylindrical, 0.500-m rod has a diameter of 0.02 m. The rod is stretched to a length of 0.501 m by a force of 3000 N. What is the Young's modulus of the material?
Answer:
Y = 4.775 x 10⁹ Pa = 4.775 GPa
Explanation:
First, we calculate the stress on the rod:
[tex]stress = \frac{Force}{Area} = \frac{3000\ N}{\pi r^2} \\\\stress = \frac{3000\ N}{\pi (0.01\ m)^2}\\\\stress = 9.55\ x\ 10^6\ Pa = 9.55 MPa\\[/tex]
Now, we calculate the strain:
[tex]strain = \frac{Change\ in Length}{Original\ Length}\\\\strain = \frac{0.501\ m - 0.5\ m}{0.5\ m}\\\\strain = 0.002\\[/tex]
Now, we will calculate the Young's Modulus (Y):
[tex]Y = \frac{stress}{strain}\\\\Y = \frac{9.55\ x\ 10^6\ Pa}{0.002} \\[/tex]
Y = 4.775 x 10⁹ Pa = 4.775 GPa
skier accelerates down the hill at a speed of 18 and reaches the bottom of the hill at a speed of 36 in 6 seconds
What an acceleration of the skier
Answer:
3 m/s²
Explanation:
Initial Velocity, u = 18
Final velocity, v = 36
Time, t = 6 seconds
Acceleration is the change in velocity of a body with time. It obtained using the relation :
Acceleration = (v - u) / t
Acceleration = (36 - 18) / 6
Acceleration = 18 / 6
Acceleration = 3m/s²
Hence, acceleration of the skier is 3m/s²
What will be the resultant of two vectors A, B, when the angle between them is 0
, 90
, 180
Answer:
When the angle between two vectors A and B is 0 degrees, they are parallel to each other and pointing in the same direction. In this case, the resultant of the two vectors will be the sum of the magnitudes of A and B, and it will also be parallel to both A and B.
When the angle between two vectors A and B is 90 degrees, they are perpendicular to each other. In this case, the resultant of the two vectors will be the vector that connects the initial point of A to the terminal point of B (or vice versa). The magnitude of the resultant vector can be found using the Pythagorean theorem: |R| = sqrt(|A|^2 + |B|^2), where |A| and |B| represent the magnitudes of vectors A and B, respectively.
When the angle between two vectors A and B is 180 degrees, they are pointing in opposite directions. In this case, the resultant of the two vectors will be the difference between the magnitudes of A and B, and it will be in the direction of the larger vector. The magnitude of the resultant vector can be found by subtracting the magnitude of the smaller vector from the magnitude of the larger vector: |R| = |A| - |B| if |A| > |B| or |R| = |B| - |A| if |B| > |A|.
To determine the resultant of two vectors A and B, it is necessary to know the magnitudes of the vectors and the angle between them. In your question, you provided the angles between A and B (0 degrees, 90 degrees, and 180 degrees), but you did not specify the magnitudes of the vectors.
Without the magnitudes of vectors A and B, it is not possible to calculate the exact resultant. The resultant vector depends on both magnitude and direction, and without knowing the magnitudes, it is not possible to determine the resultant accurately.
If you provide the magnitudes of vectors A and B, I can help you calculate the resultant for each angle.