HELPPPP ASAP!!! Plzzz

Answer:

Explanation:

Chemically identical protons in 1HNMR spectra are protons that are found in the same chemical system and produce one signal in the spectra. Non-equivalent protons are protons that reside in various chemical environments and display different signals.

(a) The provided alkyl halide has four carbons, nine hydrogens, and one chlorine atom, according to the molecular formula. To achieve a single NMR peak, all protons (9 hydrogens) must be in the same chemical environment. That is, the carbon skeleton should be made up of three methyl groups, each bound to a single carbon atom.

As a consequence, the tert-butyl chloride structure can be present. That it has three methyl groups that are all the same and are all bound to the same carbon atom. As a result. A single peak is generated by proton NMR.

(b) The other isomeric variant of C4H9Cl, which has several peaks and a doublet at d3.4, could have a proton at a nearby carbon. And then does it produce a doublet. To create the doublet, two methyl groups should be substituted for the carbon. The value of 3.4 indicates that the protons can be exposed to chlorine. As a result, the compound's composition is iso-butyl chloride.

(c) The compound C4H9Cl can have two protons on adjacent carbons since it has multiple peaks and a triplet at d3,5. And then does it generate a triplet. The meaning of 3.5 indicates that the protons should be exposed to chlorine. As a result, the compound's composition is n-butyl chloride.

(d) The compound C4H9Cl has many peaks, including a methyl group triplet at d1.0 and a methyl group doublet after. It's in the same family as the -CH party. Due to the chlorine atom, this doublet occurs at downfield at 1.5. As a result, the compound's composition is sec-butyl chloride.

Answer:

C. 1-ethyl, 3-methylcyclohexane

(Photo for proof at the bottom.)

Explanation:

The 1-ethyl is because you start numbering from the longest branch, towards the next closest branch. Prefix "eth-" means two, there are 2 carbons in the longest branch. 3-methyl is because the next branch is at number 3, and prefix "meth-" means 1, there is 1 carbon in that chain. "Cyclo" in cyclohexane means the skeletal model is shaped like a ring, and the "hexane" means there are 6 carbons in the ring. Prefix "hex" means 6.

Here's a photo of the unit review on Edge. Refer to the 2nd attachment for a visualization.

Please click the heart if this helped.

Answer:

C. 1-ethyl,3-methylcyclohexane

Explanation:

Answer:

The answers to your questions are given below.

Explanation:

__ NaBr + CaF₂ —> __ NaF + CaBr₂

The above equation can be balance as follow:

NaBr + CaF₂ —> NaF + CaBr₂

There are 2 atoms of F on the left side and 1 atom on the right side. It can be balance by writing 2 before NaF as shown below:

NaBr + CaF₂ —> 2NaF + CaBr₂

There are 2 atoms of Na on the right side and 1 atom on the left side. It can be balance by writing 2 before NaBr as shown below:

2NaBr + CaF₂ —> 2NaF + CaBr₂

Now, the equation is balanced.

Atom >>>> Reactant >>>> Product

Na >>>>>> 2 >>>>>>>>>>> 2

Br >>>>>>> 2 >>>>>>>>>>> 2

Ca >>>>>> 1 >>>>>>>>>>>> 1

F >>>>>>> 2 >>>>>>>>>>>> 2

Answer:

[tex]74.5gCO_2[/tex]

Explanation:

Hello there!

In this case, for the described reaction, it is possible to realize there is a 13:8 mole ratio between oxygen (O2) and carbon dioxide (CO2); moreover, since the molar mass of the former is 32.00 g/mol and that of latter is 44.01 g/mol, the produced mass of the required product turns out to be:

[tex]88gO_2*\frac{1molO_2}{32.00gO_2}*\frac{8molCO_2}{13molO_2}*\frac{44.01gCO_2}{1molCO_2} \\\\=74.5gCO_2[/tex]

Best regards!

Answer:

[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]

Explanation:

Hello there!

In this case, for these equilibrium problems it is firstly necessary to know the balanced reaction at equilibrium:

H2((g) + I2(g) ⇋ 2HI(g)

Next, by means of the law of mass action, it turns out possible for us to write the required and correct expression for the equilibrium constant by considering the concentrations and the coefficients in the aforementioned reaction:

[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]

Best regards!

Answer:

Vapor pressure does not changes , Boiling point of liquid increases.

Explanation:

The external pressure creates the water molecules to move rapidly. The boiling point of liquid will increase as a result of external pressure induced on the surface of the liquid. The temperature must be kept constant to bring the liquid to boil.

Answer:

coal

Explanation:

Explanation:

Na3PO4+ FeCl3 = 3NaCl + FePO4

Hope it will help :)❤

The net ionic equation is found to be balanced by both mass and charge. There are equal masses of each element on the product and reactant sides in a balanced net ionic equation.

A chemical equation which shows only those elements, compounds, and ions which are directly involved in the chemical reaction is defined as the net ionic equation. The net ionic equation give us information about the ions that exists in aqueous medium.

A net ionic equation does not consider the spectator ions. The ions which do not participate in chemical reactions and are seen on both sides of the reactions are called spectator ions.

The complete ionic equation for the given reaction is:

3Na⁺ (aq) + PO₄³⁻ (aq) + Fe³⁺ (aq) + 3Cl⁻ (aq) → 3Na⁺ (aq) + 3Cl⁻ (aq) + FePO₄ (s)

The net ionic equation is:

PO₄³⁻ (aq) + Fe³⁺ (aq) → FePO₄ (s)

To know more about net ionic equation, visit;

https://brainly.com/question/29299745

#SPJ2

The longest continuous carbon chain comprises five carbon atoms connected by single bonds, so the root name will be pentane. There is a methyl group (—CH3) attached to carbon 3 (since this molecule is symmetrical, the methyl substituent will always be on carbon 3 regardless of which end you begin counting). Thus, the name of this molecule would be 3-methylpentane.

Explanation:

c)The new kinetic energy of each gas particle is the sum of the kinetic energy that each particle is traveling with.

Answer:

80 ml

Explanation:

From the question,

Applying Dilution formular

MV = mv................... Equation 1

Where M = Molarity of Kl before dilution, V = Volume of Kl before dilution, m = molarity of Kl after dilution, v = volume of Kl after dilution.

make V the subject of the equation

V = mv/M............. Equation 2

Given: m = 1.00 M, v = 200 ml, M = 2.50 M

Substitute these values into equation 2

V = (1.00×200)/2.50

V = 80 ml

Answer:

c. uracil

Explanation:

uracil is not found in DNA. the missing base would be thymine

Answer:

2nd option

Explanation:

Answer:

12

Explanation:

Boyles law

P1 (.36)

V1(28.3)

P2(.85)

V2(?)

P1*V1=P2*V2

plug it in, and you get 12

Answer:

i think the answer is c.

Explanation:

Answer:

NO is the limiting reagent.  

In this reaction 0.886 mole of NO2 is produced

Explanation:

The chemical equation for this reaction is  

2NO(g) + O2(g) → 2NO2(g)

In this limiting reagent reaction, 2 moles of NO reacts with one mole of O2  to produce 2 mole of 2NO2

0.886 mole of NO * (2 mole of NO2/2 mole of NO) = 0.886 mole of NO2

0.503 mole of O2 * (1 mole of NO2/1 mole of O2) = 1.01 mole of NO2

Hence, NO is the limiting reagent.  

In this reaction 0.886 mole of NO2 is produced

Answer:

As of right now (4-7-2021), the physical science requirement for the SLP certificate must be met by completing coursework in the areas of either chemistry or physics.

Answer: The percentage of potassium iodide in the sample is 2.63 %.

Explanation:

The chemical equation for the reaction of iodide ions with bromine gas follows:

[tex]I^-+3Br_2+3H_2O\rightarrow 6Br^-+IO_3^-+6H^+[/tex]                (i)

The chemical equation for the reaction of iodate ions with barium ions follows:

[tex]Ba^{2+}+2IO_3^-\rightarrow Ba(IO_3)_2[/tex]                 ......(ii)

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of barium iodate = 0.0596 g

Molar mass of barium iodate = 487.13 g/mol

Using equation 1:

[tex]\text{Moles of barium iodate}=\frac{0.0596 g}{487.13 g/mol}\\\\\text{Moles of barium iodate}=1.22\times 10^{-4} moles[/tex]

By Stoichiometry of the reaction (ii):

1 mole of barium iodate is produced by 2 moles of iodate ions

So, [tex]1.22\times 10^{-4} moles[/tex] of barium iodate will be produced by [tex]\frac{2}{1}\times 1.22\times 10^{-4} =2.44\times 10^{-4}moles[/tex] of iodate ions

By the stoichiometry of the reaction (i):

1 mole of iodate ions are produced by 1 moles of iodine ions

So, [tex]2.44\times 10^{-4} moles[/tex] of iodate ions will be produced by [tex]\frac{1}{1}\times 2.44\times 10^{-4} =2.44\times 10^{-4}moles[/tex] of iodine ions

Moles of potassium iodide = Moles of iodide ions = [tex]2.44\times 10^{-4}[/tex]

Since, the molar mass of potassium iodide = 166 g/mol

Using equation 1:

[tex]\text{Mass of potassium iodide}=2.44\times 10^{-4}mol\times 166 g/mol\\\\\text{Mass of potassium iodide}=0.0405 g[/tex]

To calculate the percentage by mass of a substance, the equation used is:

[tex]\text{Percent by mass}=\frac{\text{Mass of a substance}}{\text{Mass of solution}}\times 100[/tex]

Mass of a solution = 1.54 g

Mass of potassium iodide = 0.0405 g

Using above equation:

[tex]\text{Percent potassium iodide}=\frac{0.0405 g}{1.54g}\times 100\\\\\text{Percent potassium iodide}=2.63\%[/tex]

Hence, the percentage of potassium iodide in the sample is 2.63 %.

Expressing the results of potassium iodide in percentage = 2.63%

The chemical reaction of iodine ions with Bromine gas can be expressed as :

I⁻  + 3Br₂  + 3H₂O  -- > 6Br⁻ + IO₃ + 6H⁺ ----- ( 1 )

Chemical reaction between iodate ions with barium ions  can be expressed as :  Ba²⁺  + 2IO⁻₃ ------> Ba ( IO₃ )₂   --------- ( 2 )

Step 1 : Calculate the number of Barium iodate moles

mass of Barium iodate = 0.0596 g

molar mass of Barium iodate = 487.13 g/mol

from equation ( 1 )

moles of Barium iodate = ( 0.0596 ) / ( 487.13 ) = 1.22 * 10⁻⁴ moles

also from equation ( 1 ) the moles of potassium iodide = moles of iodide ions

= 2.44 * 10⁻⁴

molar mass of potassium iodide = 166 g/mol

Next step : Determine the mass of potassium iodide

moles of potassium * molar mass

= 2.44 * 10⁻⁴  * 166 g/mol  = 0.0405 g

Final step : Determine the percentage of potassium iodide in the solution

Percentage = ( mass of potassium iodide / mass of solution ) * 100

                   = ( 0.0405 / 1.54 ) * 100

                   = 2.63%

Hence we can conclude that potassium iodide in percentage = 2.63%

Learn more : https://brainly.com/question/3388761

Answer:

As gas is compressed, the individual molecules begin to move in each others way creating a very repulsive force. It acts to oppose any further volume decrease. At very close distances, all molecules repel each other as their electron clouds emerge.

Explanation:

Answer: 1. The empirical formula is [tex]PNF_2[/tex]  

2. The molecular formula is [tex]PNF_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of P = 37.32 g

Mass of N = 16.88 g

Mass of F = 45.79 g

Step 1 : convert given masses into moles.

Moles of P =[tex]\frac{\text{ given mass of P}}{\text{ molar mass of P}}= \frac{37.32g}{31g/mole}=1.20moles[/tex]

Moles of N =[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{16.88g}{14g/mole}=1.20moles[/tex]

Moles of F =[tex]\frac{\text{ given mass of F}}{\text{ molar mass of F}}= \frac{45.79g}{19g/mole}=2.41moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For P = [tex]\frac{1.20}{1.20}=1[/tex]

For N = [tex]\frac{1.20}{1.20}=1[/tex]

For F =[tex]\frac{2.41}{1.20}=2[/tex]

The ratio of P: N: F= 1: 1: 2  

Hence the empirical formula is [tex]PNF_2[/tex]

The empirical weight of [tex]PNF_2[/tex]= 1(31)+1(14)+2(19)= 82.98 g.

The molecular weight = 82.98 g/mole

Now we have to calculate the molecular formula.

[tex]n=\frac{\text{Molecular weight}}{\text{Equivalent weight}}=\frac{82.98}{82.98}=1[/tex]

The molecular formula will be=[tex]1\times PNF_2=PNF_2[/tex]

Answer:

[tex]a=1.134\frac{m}{s^2}[/tex]

Explanation:

Hello there!

In this case, by considering the physical definition of force in terms of mass and acceleration:

[tex]F=m*a[/tex]

Given the generated force and the involved mass, we can compute the required acceleration as shown below:

[tex]a=\frac{F}{m}\\\\a=\frac{2552N}{114kg}[/tex]

Yet it is necessary to break out Newtons to:

[tex]a=\frac{2552\frac{kg*m}{s^2} }{114kg}\\\\a=1.134\frac{m}{s^2}[/tex]

Best regards!

Answer:

[tex]Q=-407kJ[/tex]

Explanation:

Hello there!

In this case, considering that the heat has two forms, sensible (variable temperature) and latent (constant temperature), we can notice that phase changes account for latent heat as the temperature remains the same. In such a way, given the enthalpy of vaporization of water, 40.67 kJ/mol, the enthalpy of condensation (reverse process) is the negative value, -40.67 kJ/mol; therefore, the associated latent heat would be:

[tex]Q=180g*\frac{1mol}{18.02g} *-40.67\frac{kJ}{mol} \\\\Q=-407kJ[/tex]

Best regards!

The answer is

C) -407 kJ d

The concentration of SO42- ions in the final solution is 0.01 mol L-1.

The neutralisation reaction between sulfuric acid (H2SO4) and sodium hydroxide (NaOH) requires the use of a chemical equation that is balanced:

H2SO4 + NaOH = Na2SO4 + 2H2O

We may deduce from the balanced equation that one mole of H2SO4 reacts with one mole of Na2SO4, meaning that the amount of SO42- ions produced is equal to the amount of H2SO4 utilised.

We may determine how many moles of H2SO4 were used by calculating the amount of 0.05 M H2SO4 solution needed to neutralise 25 mL of NaOH solution:

H2SO4 moles are equal to the product of the volume of H2SO4 (in L) and the concentration of H2SO4 (in mol L-1): 0.03214 L 0.05 mol L-1 = 0.001607 mol

The formation of SO42- ions results in the same amount of moles as the
The resulting solution contains the following amounts of SO42- ions per mole of H2SO4 used:

Moles of SO42- ions/volume of solution (in L) = 0.001607 mol/(0.025 L + 0.03214 L) = 0.01 mol L-1; concentration of SO42- ions (in mol L-1)

As a result, the final solution contains 0.01 mol L-1 of SO42- ions.

For more questions on concentration
https://brainly.com/question/17206790
#SPJ8