Answer:
Scientists study Earth's interior by studying
seismic waves. Seismic waves are waves of energy that travel
through Earth.
Explanation:
Someone plz help me
Answer:
maybe falling
Explanation:
Air is a force so its probably pushing down the object then making it fall
I think all objects? Not entirely sure.
Boyle's Law shows an inverse relationship between:
Answer:
According to Boyle's Law, an inverse relationship exists between pressure and volume. Boyle's Law holds true only if the number of molecules (n) and the temperature (T) are both constant.
Given the balanced reaction: 2KOH + H2SO4 → 2H20 + K2SO4
What mass of KOH is required to react completely with 2.70 grams of
H2SO4 to produce K2SO4 and water?
Molar mass of H2SO4 is 98 grams.
Molar mass of KOH is 56 grams.
O 2.36 g
O 3.09 g
4.73 g
O 1.54 g
I will give brainliest
Answer: 3.09 g
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} H_2SO_4=\frac{2.70g}{98g/mol}=0.0275moles[/tex]
The balanced chemical equation is
[tex]2KOH+H_2SO_4\rightarrow 6H_2O+K_2SO_4[/tex]
According to stoichiometry :
1 mole of [tex]H_2SO_4[/tex] require 2 moles of [tex]KOH[/tex]
Thus 0.0275 moles of [tex]H_2SO_4[/tex] will require=[tex]\frac{2}{1}\times 0.0275=0.0551moles[/tex] of [tex]KOH[/tex]
Mass of [tex]KOH=moles\times {\text {Molar mass}}=0.0551moles\times 56g/mol=3.09g[/tex]
Thus 3.09 g of KOH is required to react completely with 2.70 grams of
[tex]H_2SO_4[/tex]
Which element is in the lanthanide family?
Answer:
The 15 elements, together with their chemical symbols, are lanthanum (La)
Answer:
PM Promethium
Explanation:
Collision theory states that when two molecules collide with each other with sufficient energy and hit in the proper orientation, a
bond is formed. Which action will increase the rate of reaction in a closed container?
A)
adding an inert gas
B)
expand the volume
C)
increase the temperature
D
decrease the concentration
Answer:
c increase the temperature
Explanation:
in the following reaction, which element in what species is reduced? zn (s) 2 hcl (aq) → zncl₂ (aq) h₂ (g)
Answer : The element that is reduced in the given reaction is hydrogen (H).
Explanation: In the given reaction, Zn (s) 2 HCl (aq) → ZnCl₂ (aq) H₂ (g), Zinc (Zn) is oxidized to form Zinc chloride (ZnCl2). The reduction occurs in the other half of the reaction, where hydrogen cation (H+) from HCl is reduced to hydrogen (H2) gas. The reduction occurs because hydrogen is gaining electrons, which is the opposite of oxidation.The redox reaction in question can be broken down into two half-reactions:Zn (s) → Zn2+ (aq) + 2 e- (reduction half-reaction)2 H+ (aq) + 2 e- → H2 (g) (oxidation half-reaction)Hence, the element that is reduced in the given reaction is hydrogen (H).
Learn more about reduction here https://brainly.in/question/10805008
#SPJ11
F or pass? I’m okay with pass
Answer:
pass
Explanation:
pass
Hey Friends Can Yall Help Me Show Ya Work And Don’t Comment No B.S Cause Yu Will Get Cursed Out
Cooking an egg is one type of process, while the formation of snow is another. Which answer best explains which is exothermic and which is endothermic? Cooking an egg is endothermic because the egg gains heat from the surrounding Formation of snow is exothermic because water loses heat to the surrounding wh becomes snow. Cooking an egg is exothermic because the egg loses heat to the surroundings. Formation of snow is endothermic because water gains heat when it forms snow
Cooking an egg is endothermic because the egg gains heat from the surrounding. The formation of snow is exothermic because water loses heat to the surroundings when it becomes snow.
The endothermic process refers to the process in which heat is absorbed, while the exothermic process refers to the process in which heat is released.
The egg receives/absorbs heat from a heat source,(e.g. the stove), which raises the temperature of the egg and causes it to cook, making it an endothermic process.
On the other hand, heat is released from the water molecule when the water vapor present in the atmosphere condenses and freezes to form snow. Therefore, the formation of snow is exothermic.
Read more about endothermic and exothermic processes on:
https://brainly.com/question/30624362
Cooking an egg is endothermic because the egg gains heat from the surroundings, while the formation of snow is exothermic because water loses heat to the surroundings, resulting in the formation of snow.
In terms of energy transfer, an endothermic process absorbs heat from the surroundings, while an exothermic process releases heat to the surroundings. When cooking an egg, heat is applied to the egg through methods such as boiling, frying, or baking. The egg absorbs heat from the surrounding environment to cook and undergo chemical and physical changes. As a result, cooking an egg is an endothermic process because the egg gains heat from its surroundings.
On the other hand, the formation of snow occurs when water vapor in the atmosphere condenses into ice crystals. This process is exothermic because water vapor loses heat to the surroundings, causing the water molecules to slow down and form a solid structure. The release of heat during this phase transition results in the formation of snow. Therefore, the correct explanation is that cooking an egg is endothermic because the egg gains heat from the surroundings, while the formation of snow is exothermic because water loses heat to the surroundings, leading to the formation of snow.
Learn more about molecules here: https://brainly.com/question/14130817
#SPJ11
Express your answer in complete form in the order of orbital filling as a string without blank space between orbitals. For example, 1s 22s 2 should be entered as 1s 228 2.
To answer the question, it is important to have an understanding of the order of orbital filling.
The order of orbital filling describes the order in which electrons occupy orbitals.
This order can be determined using the aufbau principle, which states that electrons will occupy the lowest-energy orbital available.
The order of orbital filling is as follows: 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p
Therefore, the complete form of the order of orbital filling, without blank spaces between orbitals, is:1s2s2p3s3p4s3d4p5s4d5p6s4f5d6p7s5f6d7p
#SPJ11 https://brainly.com/question/31701279
What conditions apply to masses mA and ms for the acceleration to be in one direction (nay, ma down the plane), or in the opposite direction? Check all that apply 0 mA > m sin (mA up the plane) Determine a formula for the acceleration of the system in terms of mA, mp. 0, and 9. Ignore the mass of the cord and pulley, Express your answer in terms of the variables mA, mp.0, and g. mB9-mAgsine mBmA Previous Answers ✓ Correct Constants / Periodic Ta What conditions apply to masses mA and mB for the acceleration to be in one direction (say, mA down the plane), or in the opposite direction? Check all that apply. O mA > mosin 0 (mA up the plane) masinº < mb (mA up the plane) MA> msin 0 (ma up the plane) mA< MB (mA down the plane) MA > MB (mA down the plane) mA> mB sine (mA down the plane) Ain 0 > MB (mA up the plane) m > mB (mA up the plane) MA< MB (mA up the plane) masin > mA down the plante) OMA > msin ma down the plane) Asin mar de te plane) Submit
The conditions that apply to masses mA and mB for the acceleration to be in one direction (say, mA down the plane), or in the opposite direction are as follows:
1. mA > mB sine (mA down the plane)
2. mB9-mAg sine mBnA
The conditions that apply to masses mA and mB for the acceleration to be in one direction (say, mA down the plane), or in the opposite direction are as follows:
1. mA > mB sine (mA down the plane)
2. mB9-mA gsine mBnA
When the value of mass mA is greater than mB sine (mA down the plane), the acceleration is in one direction.
When mB9-mAgsine mBmA is greater, the acceleration is in the opposite direction.
Determine a formula for the acceleration of the system in terms of mA, mp.0, and 9.
Ignore the mass of the cord and pulley, Express your answer in terms of the variables mA, mp.0, and g.
The formula for acceleration of the system in terms of mA, mp, 0 and 9 is given below;
a = (mB-mAsinθ)/(mA + mB + m0) * g
Where,
θ = angle of inclination of the plane.
g = acceleration due to gravity.
mA = mass of object A.
mB = mass of object B.
m0 = mass of the pulley and cord.
To know more about plane visit:
https://brainly.com/question/2400767
#SPJ11
Drag and drop each trait to the name it describes.
Kim
Understands gardening
Wendell
Gonzalo
Learn English quickly
Is determined and strong
Can be impatient
Tries new things easily
Helps his family survive
Answer:
Kim:
Is determined and strong Tries new things easilyWendell:
Can be impatient Understands gardeningGonzalo:
Learns English quickly Helps his family surviveExplanation:
did it on Edge.
What is the potential energy of a rollercoaster if it weighs 1565 kg and sits on a 115 m tall ride?
Answer:
Explanation:
Potential energy builds as the coaster is going up the loop-the-loop and converts to kinetic energy on the way down and out of the loop-the-loop. The potential energy of the coaster is at its lowest and the kinetic energy is at its highest as the coaster moves in the lowest point of the loop-the- loop.
How would you prepare a 35 ml solution of 95% (volume/volume solution of ethanol?
Explanation:
Solutions. 1. If 47 g of KCl dissolved in enough water to give 375 mL of soloution, what is the molarity ... vo volume of solute . ... v/v ethanol, how much 95% v/v ethanol ... prepare 200. mL ...
Balance the following equation
_MgF2 + _Li2CO3 -> _MgCO3 + _LiF
Answer:
1 MgF2 + 1 Li2CO3 --> 1 MgCO3 + 2 LiF
Explanation:
A 1.00 L volume of gas at 35.0 °C exerts a pressure of 85.5 kPa. What will the pressure
be at 127 °C? Assume constant volume.
Answer:
111.03kPa = P₂
Explanation:
Gay Lussac's Law states that the pressure of a gas is directly proportional to the absolute temperature when volume remains constant.
The equation is:
P₁T₂ = P₂T₁
Where P is pressure and T absolute temperature of 1, initial state and 2, final state of the gas.
P₁ = 85.5kPa
T₂ = 127°C + 273.15 = 400.15K
P₂ = ?
T₁ = 35°C + 273.15 = 308.15K
P₁T₂ = P₂T₁
85.5kPa*400.15K = P₂*308.15K
111.03kPa = P₂Sam is about to drop a golf ball from his hand.
Get ready, you should catch it.
Answer:
As an object falls, its gravitational potential energy decreases as its speed—and therefore its kinetic energy—increases.
Explanation:
Study Island
Weight is the measure of gravity on an object measured by a weight in Newtons. Weight changes if gravitational force changes.
Mass is the amount of kilogram in an object measured by a __________ in grams and does not change…it stays the _________.
Mass is an intrinsic property of matter and is measured in kilograms. The mass of a bird is a constant. A 15-gram bird is 15 grams, whether measured on the Earth, the Moon, or Mars. Weight is a measure ofthe force of gravity on a physical object and is measured in newtons.
What would cause entropy to increase in a reaction?
A. The products becoming more spread out
B. The products forming an ordered pattern
C. The products forming fewer molecules
D. The products forming a more rigid structure
i think A but if I'm wrong sorry
then if increasing then becoming spread out so letter A
What do all electrolytes have in common?
They have low melting points.
They are polar molecules.
They have mobile ions in solution.
They are compounds of carbon.
Burning a candle melts the wax, but also burns the wick. Explain how burning a candle involves both physical and chemical changes.
Answer:
Burning of the candle is both physical and chemical change. Burning of the candle melts the wax and hence physical state of wax has changed from solid to liquid.
Again the wax combines with the atmospheric oxygen and changes to carbon dioxide, heat and light.
Thus both the changes are accompanied by the burning of the candle.
Explanation:
hope this helps!
~mina
2LiBr Pb(NO3)
2 → PbBr2 2LiNO3
IBNEED HELP ASAP
NO BULL I NEED ACTUAL HELP
Answer:
god says dont use any assault language okay?
Explanation:
What number and types of atoms occur in a formula unit of
Ca(NO3),?
Answer:
help with mine ill help with yours
Answer:
1 calcium atom, 2 nitrogen atoms, and there are 6 oxygen atoms
Explanation:
Calculate the molar mass of a solute in a 1.30 L solution with of 0.50 M
containing 10.5 g of the solute.
Answer: 16 g/mol
Explanation: Molarity is Moles/Liters or Mol/L
(0.50 mol/L)(1.30L) = 0.65mol
(cancels out L)
Molar mass is g/mol so...
10.5g/0.65mol = 16.1 g/mol
Rounded to 2 sig figs is 16 g/mol
ClO3−
Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. Show the formal charges of all atoms in the correct structure.
The molecule ClO₃⁻ consists of one chlorine atom (Cl) and three oxygen atoms (O), with a negative charge (⁻) on the molecule.
The molecule ClO₃⁻ consists of one chlorine atom (Cl) and three oxygen atoms (O), with a negative charge (⁻) on the molecule.
The chlorine atom (Cl) is in the center, bonded to one oxygen atom (O) through a single bond and to the other two oxygen atoms (O) through double bonds. Each oxygen atom (O) has two lone pairs of electrons around it.
When all the electrons of an atom are shared equally, the charge attained by the atom is known as a formal charge.
The formal charge can be calculated as:
Formal charge =
valence electron - non-bonding electron - bonding electron/2
In the molecule, the formal charge of Oxygen = -1.
In the molecule, the formal charge of Chlorine = +2
The oxygen atom has 8 electrons, in which 2 are shared in the bond formation, and 6 electrons are valence electrons.
The chlorine atom has 7 valence electrons in which 6 electron pairs are shared with the oxygen atom, and 1 lone pair has been available with Cl.
The structure of molecule ClO₃⁻ has been given in the image attached. The image shows the available lone pairs and the bonding in the structure.
Thus, the molecule has a formal charge of -1 on all oxygen atoms, and +2 on the Cl atom.
To know more about ClO₃⁻, follow the link:
https://brainly.com/question/11311492
#SPJ4
what is the ratio between the energy and oxygen based on the equation
The ratio between the energy and oxygen is 21.36 kJ/g of oxygen.
According to the given balanced equation:C_{2}H_{5}OH + 2O_{2} → 2CO_{2} + 3H_{2}O + 1367 kJ. The balanced equation tells us that one molecule of C_{2}H_{5}OH reacts with two molecules of O2 to form two molecules of CO2, three molecules of H_{2}O, and 1367 kJ of energy. Therefore, to determine the ratio between energy and oxygen, we need to first find the energy released per mole of O2 reacted. To do this, we need to use the energy released by the combustion of 1 mole of C_{2}H_{5}OH, which is given as 1367 kJ. So, 1 mole of C_{2}H_{5}OH releases 1367 kJ of energy. To balance the equation, 2 moles of O2 are required for every mole of C_{2}H_{5}OH reacted. So, 2 moles of O2 is equivalent to 1367 kJ of energy. Therefore, the energy released per mole of O2 is 1367/2 = 683.5 kJ/mol. Oxygen has a molar mass of 32 g/mol and therefore the mass of one mole of oxygen is 32 g/mol. Using the molar mass of oxygen and the energy released per mole of O2, we can calculate the energy released per gram of oxygen as follows: Energy released per gram of O2 = Energy released per mole of O2 / Molar mass of O2= 683.5 / 32 = 21.36 kJ/g. Therefore, the ratio between the energy and oxygen is 21.36 kJ/g of oxygen.
learn more about combustion Refer: https://brainly.com/question/14987280
#SPJ11
complete question: C_{2}H_{5}OH + 2O_{2} → 2CO_{2} + 3H_{2}O + 1367 kJ
What is the ratio between the energy and oxygen based on the equation?
-[?] kJ
[?]mol O2
For which of the following equations would the value of Kp = Kc(RT)? Note Kc is sometimes called K.
A. A (g) + 2B (s) = C(s) + 2 D (g)
B. 2 NO₂ (g) = N₂O. (g)
C. 2 NBr. (g) = N₂ (g) + 3 Br₂ (g)
D. 2 HI (g) H₂(g) + 12 (g)
The equation for which the value of
Kp = Kc(RT) is valid is B.
2 NO₂(g) ⇌ N₂O₄(g).
The equilibrium constant (Kc) for the forward reaction is the ratio of the product of the concentration of the products to the product of the concentrations of the reactants, with each concentration raised to the power corresponding to the number of moles of that substance in the balanced chemical equation.
The expression for Kc is as follows:
Kc = [C]c [D]d/[A]a [B]b
Where [ ] represents the concentration of each substance in moles per liter and a, b, c, and d are the coefficients in the balanced chemical equation, as shown above.
Thermodynamic equilibrium constant is denoted by Kp. If we use the ideal gas law, we can link Kp and Kc as follows:
Kp = Kc(RT)ⁿ
where R is the ideal gas constant, T is the temperature in Kelvin, and n is the number of moles of gaseous product minus the number of moles of gaseous reactant.
For the equation,
2 NO₂(g) ⇌ N₂O₄(g)
we can see that the products and reactants are in gas phase.
Hence, the value of
Kp = Kc(RT)
is valid for this equation.
Answer: B. 2 NO₂(g) ⇌ N₂O₄(g)
To know more about equation visit:
https://brainly.com/question/30114830
SPJ11
some solution splashes on the lab bench when pouring the solution into the buchner funnel during vacuum filtration. the mass of precipitate data value will be __ the actual value.
If some solution splashes on the lab bench when pouring the solution into the buchner funnel during vacuum filtration, the mass of precipitate data value will be less than the actual value
How to determine the massWhen solution splashes onto the lab bench, some of the precipitate may be lost, resulting in a lower amount of collected precipitate in the Buchner funnel than expected.
This loss leads to a lower mass measurement when compared to the actual value if no solution had splashed. Therefore, the mass of precipitate data value will be less than the actual value.
Read more on precipitate data here https://brainly.com/question/29347607
#SPJ4
Can anyone tell me what the answer is?
Answer: c) A. 5.606x10²³atoms is the correct answer.
Explanation: