Calculate the pH for each case in the titration of 50.0 mL of 0.220 M HClO(aq) with 0.220 M KOH(aq). Use the ionization constant for HClO, 4.0×10⁻⁸
What is the pH before addition of any KOH?
What is the pH after addition of 25.0 mL KOH?
What is the pH after addition of 35.0 mL KOH?
What is the pH after addition of 50.0 mL KOH?
What is the pH after addition of 60.0 mL KOH?

Answers

Answer 1

To calculate the pH at each stage of the titration, we need to consider the reaction between HClO and KOH. The balanced chemical equation for the reaction is:

HClO(aq) + KOH(aq) → KClO(aq) + H2O(l)

Before the addition of any KOH, we have only the HClO solution. HClO is a weak acid, so we can use the ionization constant (Ka) to calculate its initial concentration of H⁺ ions. Since HClO is the only acid present initially, the initial concentration of H⁺ ions is equal to the initial concentration of HClO. Therefore, [H⁺] = 0.220 M.

To calculate the pH after each addition of KOH, we need to determine the amount of HClO that reacts with KOH. From the balanced equation, we can see that the stoichiometric ratio between HClO and KOH is 1:1. This means that for every mole of HClO that reacts, an equal number of moles of H⁺ ions are consumed.

Before addition of any KOH:

[H⁺] = 0.220 M (given)

pH = -log10(0.220) ≈ 0.66

After addition of 25.0 mL KOH:

The amount of HClO reacted can be calculated using the initial concentration and the volume of KOH added. Since the concentration of KOH is the same as HClO, the concentration of HClO remaining is (0.220 M - 0.220 M/4) = 0.165 M. The volume of HClO solution remaining is (50.0 mL - 25.0 mL) = 25.0 mL = 0.025 L. Therefore, [H⁺] = 0.165 M/0.025 L = 6.6 M.

After addition of 35.0 mL KOH:

Following the same calculations as above, [H⁺] = 0.110 M.

After addition of 50.0 mL KOH:

[H⁺] = 0.055 M.

After addition of 60.0 mL KOH:

[H⁺] = 0.022 M.

Keep in mind that pH is a logarithmic scale, so as the concentration of H⁺ ions decreases, the pH value increases.

Learn more about pH here : brainly.com/question/2288405

#SPJ11


Related Questions

you assumed that you centrifuged the fe(iii)-oxalate solution for the correct amount of time; which means that there was no ca(ox) precipitate in the supernatant after it was centrifuged. what if ca(ox) was present in the solution? how would the result be affected (i.e., artificially high or low % mass of fe)?

Answers

If Ca(ox) precipitate was present in the solution after centrifugation, the result would be artificially low for the percentage mass of Fe.

Centrifugation is a technique used to separate solid particles from a liquid solution. In this case, the Fe(III)-oxalate solution was centrifuged to remove any solid precipitates, ensuring that only the supernatant (liquid portion) was analyzed.

If Ca(ox) precipitate was present in the solution, it would also be pelleted along with the Fe(III) precipitate during centrifugation. To determine the effect on the percentage mass of Fe, we need to consider the calculation used to determine the mass of Fe in the sample.

Assuming the experiment aims to determine the percentage mass of Fe in the Fe(III)-oxalate solution, the typical calculation involves measuring the mass of the Fe precipitate after it is dried and then dividing it by the initial mass of the sample.

Let's say the initial mass of the sample is M and the mass of the Fe precipitate obtained after drying is m(Fe). The percentage mass of Fe would be calculated as:

% mass of Fe = (m(Fe) / M) * 100

However, if Ca(ox) precipitate is present in the solution, it would contribute to the mass of the obtained precipitate. This would result in an artificially low measurement of the mass of Fe precipitate and, consequently, a lower percentage mass of Fe in the calculation.

If Ca(ox) precipitate is present in the Fe(III)-oxalate solution after centrifugation, it would lead to an artificially low percentage mass of Fe. The presence of Ca(ox) would contribute to the mass of the obtained precipitate, reducing the measured mass of Fe and affecting the overall calculation.

To know more about precipitate visit:

https://brainly.com/question/30386923

#SPJ11



What volume of 0.062 M HCl is needed to react to completely neutralize 19.4 mL of 0.050 M Ba(OH)2? *

Answers

Answer:

31.3 mL

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ba(OH)₂ —> BaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of the base, Ba(OH)₂ (n₆) = 1

Finally, we shall determine the volume of the acid need for the reaction as follow:

Molarity of acid, HCl (Mₐ) = 0.062 M

Mole ratio of the acid, HCl (nₐ) = 2

Volume of base, Ba(OH)₂ (V₆) = 19.4 mL

Molarity of base, Ba(OH)₂ (M₆) = 0.050 M

Mole ratio of the base, Ba(OH)₂ (n₆) = 1

Volume of acid, HCl (Vₐ) =?

MₐVₐ / M₆V₆ = nₐ / n₆

0.062 × Vₐ / 0.050 × 19.4 = 2/1

0.062 × Vₐ / 0.97 = 2

Cross multiply

0.062 × Vₐ = 0.97 × 2

0.062 × Vₐ = 1.94

Divide both side by 0.062

Vₐ = 1.94 / 0.062

Vₐ = 31.3 mL

Thus, the volume of the acid needed is 31.3 mL

(1) calculate the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm.

Answers

The energy of red light emitted by a neon atom with a wavelength of 703.2 nm is approximately [tex]2.83 * 10^-19 J[/tex]. The correct answer is E.

To calculate the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm, we can use the equation:

[tex]E=\frac{hc}{\lambda}[/tex]

where:

E is the energy,

h is Planck's constant ([tex]6.62607015 * 10^{-34) J.s[/tex]),

c is the speed of light in a vacuum ([tex]2.998 *10^{8} m/s[/tex]),

and [tex]\lambda[/tex] is the wavelength of the light.

Let's substitute the given values into the equation:

[tex]E=\frac{(6.62607015*10^ -34 J.s)(2.998*10^8 m/s)}{703.2*10^-9m}[/tex]

Calculating this expression, we find:

[tex]E=2.83*10^-19 J[/tex]

Therefore, the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm is approximately[tex]2.83 * 10^-19 J.[/tex]

From the options provided, the closest answer is E) [tex]2.83 * 10^-19 J.[/tex]

To know more about Atoms

https://brainly.com/question/6258301

#SPJ4

The complete question is:

11) Calculate the energy of the red light emitted by a neon atom with a wavelength of 703 2 nm.

A) 3.54 x 10-19)

B) 4.27 x 10-19)

C) 2.34 x 10-19

D) 6,45 x 10-19 J

E) 2.83 x 10-19)

electrolytic dissociation of ethanoic acid pls​

Answers

CH3COOH (aq) H+ (aq) + CH3CHOO- (aq) at 25.0oC Ka= 1.76 x 10-5

How many moles of water are consumed if 0.729 mol H

Answers

1) State the equation that represents the chemical reaction

P2O5 + 3H2O → 2H3PO4

2) State the molar ratios: 1 mol P2O5 : 3 mol H2O : 2 mol H3PO4

3) Use the proportions 3molH2O / 2 mol H3PO4

0.729 mol H3PO4 * [ 3 mol H2O / 2 mol H3PO4] = 1.094 mol H2O

Answer: 1.094 mol of water

Answer: The answer that i got for this is 1.09 give the other kid the brainliest.

Explanation:

why should atom or ions join together to form compounds? ​

Answers

Answer:

while atoms form together, they percentage their outermost electrons to create more sustainable strength states. This sharing bonds the atoms into an ionic shape or a molecule

Explanation:

i hope this help a little

2Al(s) + 3Cu(NO3) 2(ag) -> 3Cu(s) + 2Al(NO3)з(aq) why is this a redox reaction

Answers

Explanation:

The given chemical equation represents a redox (reduction-oxidation) reaction. Redox reactions involve the transfer of electrons between species, resulting in changes in the oxidation states of the elements involved. Let's analyze the oxidation states of the elements in this equation:

On the reactant side:

- Aluminum (Al) has an oxidation state of 0 since it is in its elemental form.

- Copper (Cu) in the Cu(NO3)2 compound has an oxidation state of +2.

- Nitrogen (N) in the Cu(NO3)2 compound has an oxidation state of +5.

- Oxygen (O) in the Cu(NO3)2 compound has an oxidation state of -2.

On the product side:

- Copper (Cu) in the Cu(s) has an oxidation state of 0 since it is in its elemental form.

- Aluminum (Al) in the Al(NO3)3 compound has an oxidation state of +3.

- Nitrogen (N) in the Al(NO3)3 compound has an oxidation state of +5.

- Oxygen (O) in the Al(NO3)3 compound has an oxidation state of -2.

By comparing the oxidation states of the elements before and after the reaction, we can observe the following changes:

- Aluminum (Al) undergoes oxidation, as its oxidation state increases from 0 to +3.

- Copper (Cu) undergoes reduction, as its oxidation state decreases from +2 to 0.

Since there is a transfer of electrons from aluminum to copper, this reaction is classified as a redox reaction. Aluminum loses electrons (oxidation) and copper gains those electrons (reduction).

which type of chemical bond occurs when atoms share electrons, as shown in this diagram? choose one: a. covalent b. metallic c. ionic d. polarity

Answers

The chemical bond that occurs when atoms share electrons is called a covalent bond. A covalent bond is a chemical bond that occurs when two or more atoms share electrons. This can happen when two or more atoms come together to form a molecule.

In a covalent bond, the electrons that are shared between the atoms are held together by a strong force. This force is called a covalent bond. The strength of the covalent bond depends on how many electrons are being shared and how strong the attraction between the atoms is. A covalent bond can be polar or nonpolar. A polar covalent bond occurs when there is an uneven sharing of electrons between the atoms. In this type of bond, one atom will have a stronger pull on the electrons than the other. This results in a partial positive charge on one atom and a partial negative charge on the other.

A nonpolar covalent bond occurs when the electrons are shared equally between the atoms. This results in no partial charges on the atoms. Overall, covalent bonds are important in the formation of many important molecules in the body and in the environment. The length and strength of a covalent bond depend on several factors. For example, the number of electrons shared between the atoms and the distance between the atoms can affect the strength of the bond. Similarly, the type of atoms involved in the bond can affect its strength.

know more about covalent bond,

https://brainly.com/question/19382448

#SPJ11

what mass of h2 is needed to react with 8.75 g of o2 according to the following equation: o2(g) h2(g) → h2o(g)? (4 points) A. 0.547 g h2 B. 17.5 g h2 C. 1.10 g h2 D. 4.38 g h2

Answers

The mass of H2 needed is approximately 1.09 g.among the given options, the closest value is:C. 1.10 g H2

To determine the mass of H2 needed to react with 8.75 g of O2, we need to use the balanced equation and stoichiometry. The balanced equation is:

[tex]O_2(g) + 2H_2(g)[/tex] → [tex]2H_2O(g)[/tex]

From the equation, we can see that 1 mole of O2 reacts with 2 moles of H2. To calculate the mass of H2, we need to convert the mass of O2 to moles using its molar mass and then use the mole ratio to find the corresponding mass of H2.

1. Calculate the number of moles of O2:

  Moles of O2 = Mass of O2 / Molar mass of O2

The molar mass of O2 is 32 g/mol.

Moles of O2 = 8.75 g / 32 g/mol

2. Use the mole ratio to find the moles of H2:

  Moles of H2 = Moles of O2 × (2 moles H2 / 1 mole O2)

3. Calculate the mass of H2:

  Mass of H2 = Moles of H2 × Molar mass of H2

The molar mass of H2 is 2 g/mol.

Now, let's perform the calculations:

Moles of O2 = 8.75 g / 32 g/mol ≈ 0.2734 mol

Moles of H2 = 0.2734 mol × (2 moles H2 / 1 mole O2) ≈ 0.5468 mol

Mass of H2 = 0.5468 mol × 2 g/mol ≈ 1.0936 g

Rounded to three significant figures, the mass of H2 needed is approximately 1.09 g.Among the given options, the closest value is:

C. 1.10 g H2.

Learn more about stoichiometry here:

https://brainly.com/question/28780091

#SPJ11

how did the report on the topic of climate change help the general public relate to the topic?​

Answers

Answer:

Report of the climate change can help the people. As when people wants to go for  picnics or somewhere else. They did not have any idea that what will be the climate when they go. Report of climate change help him to choose the right time for going on picnics or  somewhere else.

Answer:

The report mentioned ways that people’s lives may change because of climate change, such as rising sea levels, reduced crop efficiency, and heat waves. This information may encourage the public to change the way they use energy, for example how they heat their homes or power their cars.

Explanation:


Which choice identifies the compound's structural formula, and what information does the structural formula provide
that the molecular formula does not?

Image B represents the structural formula, and only the structural formula allows the molecular
shape to be determined because it shows the position and alignment of the atoms and bonds.


Image B represents the structural formula, and only the structural formula allows the number of
atoms of each element in the compound to be determined because it provides subscripts.


Image A represents the structural formula, and only the structural formula allows the type of
bond formed by the compound to be determined because it shows the element symbols written
in order (metals and then nonmetals).


Image A represents the structural formula, and only the structural formula allows the bond
length of each bond between the atoms of the compound to be determined because it shows the
bonds represented by a line.

Answers

Answer:

second opinion is correct

Too many objects inside a laboratory fume hood can disrupt the airflow and possibly compromise your safety. Which of the following are considered best practices in the use of a laboratory fume hood? Select all that apply. Then, select Submit. O Open the sash as much as possible O Work at least 25 cm inside the hood O Use fast, quick movements to limit your exposure O Place objects to one side-work on the other side O Use a raised shelf along the back of the hood

Answers

A laboratory fume hood, also known as a fume cupboard or fume cabinet, is a specially designed enclosure used in laboratories to protect workers from exposure to hazardous fumes, gases, vapors, or dust. The correct answer is:

1. Open the sash as much as possible

2. Work at least 25 cm inside the hood

4. Place objects to one side-work on the other side

5. Use a raised shelf along the back of the hood.

A fume hood typically consists of a transparent sash or door at the front that can be opened or closed, allowing access to the work area inside the hood. The hood is connected to an exhaust system that draws air through the hood, creating a negative pressure inside and preventing the escape of hazardous substances into the laboratory environment.

Opening the sash allows for better airflow and reduces the buildup of hazardous substances inside the hood. Working inside the hood ensures that you are within the protected area where airflow is present. Placing objects to one side of the hood and working on the other side helps maintain a clear and unobstructed airflow path. Using a raised shelf along the back of the hood allows for better organization of materials and equipment, keeping them within reach but away from the front of the hood.

Therefore, the correct options are:

1. Open the sash as much as possible

2. Work at least 25 cm inside the hood

4. Place objects to one side-work on the other side

5. Use a raised shelf along the back of the hood.

For more details regarding laboratory fume hood, visit:

https://brainly.com/question/10166359

#SPJ12

Final answer:

Best practices for using a lab fume hood include not opening the sash more than necessary, working at least 25 cm inside the hood, using slow, steady movements, arranging objects to one side, and using a raised shelf along the back of the hood. Much like fume hoods, biological safety cabinets use containment and directional airflow for safety.

Explanation:

When using a laboratory fume hood, it's crucial to observe best practices to ensure safety. The best practices include:

Not opening the sash more than necessary, because it can disrupt the airflow. Working at least 25 cm inside the hood which ensures that you are adequately protected from the fumes and that the airflow is not disrupted. Using slow, steady movements rather than fast, quick ones, limiting the chances of airborne particles being generated or disrupting the airflow. Arranging objects so they don't block the airflow - it's usually better to place objects to one side and work on the other. Using a raised shelf along the back of the hood can help to optimize airflow and improve safety.

Laboratory biological safety cabinets, or BSCs, also use a similar principle of containment and directional airflow to protect lab workers and the environment from exposure to hazards. For instance, Class I BSCs use air intake filters to prevent environmental contaminants from entering the workspace and air exhaust filters to contain pathogens within the hood.

Learn more about Laboratory Safety here:

https://brainly.com/question/33592496

#SPJ6

an unknown alkene was treated with mcpba in dichloromethane, followed by work-up with h2o/h . a racemic mixture of the compound shown below was obtained. what is correct name of the starting alkene? A. (Z)-3-Methylpent-2-ene B. (E)-3-Methylpent-2-ene C. 2-Methylpent-2-ene D. 2,3-Dimethylbut-2-ene E. none of the above

Answers

Option A. Z)-3-Methylpent-2-ene  is the correct name of the starting alkene

What is a starting alkene

A starting alkene refers to the initial unsaturated hydrocarbon compound used in a chemical reaction or synthesis. It is the precursor or starting material from which other compounds or products are formed through various chemical transformations.

In organic chemistry, alkene refers to a class of hydrocarbons that contain a carbon-carbon double bond. These compounds are important intermediates in many organic reactions and serve as building blocks for the synthesis of more complex molecules.

Read mote on alkene here:https://brainly.com/question/29120960

#SPJ4

how to determine the bond order from the molecular electron configurations

Answers

Bond order can be determined by counting the total number of electrons in the bonding molecular orbitals (sigma and pi orbitals), then determining the total number of bonding electrons by subtracting the number of electrons in non-bonding orbitals from the total number of electrons and dividing the total number of bonding electrons by 2.

To determine the bond order from the molecular electron configuration, you need to follow these steps:

1. Write the molecular electron configuration for the molecule by combining the atomic electron configurations of the constituent atoms. This involves filling the molecular orbitals with electrons according to the Aufbau principle and the Pauli exclusion principle.

2. Count the total number of electrons in the bonding molecular orbitals (sigma and pi orbitals). This includes the electrons in both bonding and non-bonding orbitals.

3. Determine the total number of bonding electrons by subtracting the number of electrons in non-bonding orbitals from the total number of electrons.

4. Divide the total number of bonding electrons by 2 to get the bond order.

The bond order represents the number of electron pairs shared between two atoms in a molecule. It indicates the strength and stability of the bond. A higher bond order indicates a stronger and shorter bond.

For example, let's consider the molecular electron configuration of O2:

Oxygen (O) atomic electron configuration: 1s² 2s² 2p⁴

Combining two oxygen atoms, we get the molecular electron configuration for O₂:

σ2s² σ2s² σ2p⁴ π2p⁴

Counting the total number of electrons in the bonding orbitals, we have 2 electrons in σ2s², 2 electrons in σ2p⁴, and 4 electrons in π2p⁴. So, the total number of electrons is 8.

Since all the electrons, in this case, are bonding electrons, the total number of bonding electrons is also 8.

Dividing the total number of bonding electrons by 2, we get a bond order of 4/2 = 2.

Therefore, the bond order of O₂ is 2, indicating a double bond between the two oxygen atoms.

Learn more about bond order here:

https://brainly.com/question/12447843

#SPJ4

make this and tell me how u like it its fat lady from hairy pawter find the pics on elgoog or use mine movie and site was changed its on scratch a web

Answers

Answer:

are u brocken

Explanation:

Element
H
Ba
Si
Group
1
2
6A
10
Period
3
4

Answers

The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe.

The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal.

The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color.

The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe. Hydrogen has one proton and one electron in its nucleus, and it is classified as a nonmetal.

It is highly reactive and can form compounds with other elements through various chemical reactions. Hydrogen plays a crucial role in the formation of water (H2O) and is used in various industrial processes, such as hydrogenation in the production of margarine and ammonia synthesis for fertilizer production.

The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal. Barium has an atomic number of 56, meaning it has 56 protons in its nucleus.

It is highly reactive and reacts vigorously with water and oxygen in the air. Barium compounds, such as barium sulfate and barium carbonate, have various applications, including in the production of pigments, glass, and fireworks. Barium is also used in medical imaging procedures, where barium sulfate is ingested or injected to visualize the gastrointestinal tract.

The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color. Silicon is a semiconductor and is widely used in the electronics industry for the production of computer chips, solar cells, and other electronic devices.

It has atomic number 14 and forms an important component of the Earth's crust, making up around 28% of its mass. Silicon is also a key element in the structure of many minerals, such as quartz and feldspar.

For more such questions on hydrogen visit:

https://brainly.com/question/24433860

#SPJ8

Which of the following is the most likely reason the oxetane derivative of thymine disrupts DNA replication? a. The oxetane derivative is not recognized by DNA polymerase. b. The oxetane derivative can form hydrogen bonds with guanine. c. The oxetane derivative lacks the functional groups to form hydrogen bonds with adenine. d. The oxetane derivative resembles uridine.

Answers

Thymine (T) and its derivatives play important roles in DNA and RNA structure and function. Oxetane derivatives of thymine can inhibit DNA replication by disrupting the hydrogen bonding that stabilizes the DNA double helix.

Option C is the most likely reason that the oxetane derivative of thymine disrupts DNA replication: the derivative lacks the functional groups to form hydrogen bonds with adenine, which it would normally pair with to form a stable base pair.Thymine derivatives have a significant effect on the properties of DNA, as they can influence the structure and stability of the DNA double helix. Thymine derivatives can cause DNA replication to stall or disrupt, as they affect the ability of DNA polymerase to accurately copy the DNA sequence. This is because DNA polymerase relies on complementary base pairing to ensure accurate replication, and the presence of thymine derivatives can interfere with this process by disrupting the formation of stable base pairs. Overall, the oxetane derivative of thymine can disrupt DNA replication by preventing proper base pairing with adenine, leading to errors in the DNA sequence that can have harmful effects.

To know more about oxetane visit:

https://brainly.com/question/29642467

#SPJ11

!!MARKING BRAINLIEST!! Please help this is due at midnight!! No websites please just help me! :(

Answers

Answer:

I'll do the first one for you. The reason why I'm not going to do the rest is because this is pretty simple stuff. I'll explain how I got the answer, please read it ^^ the rest of the problems should be a breeze.

1. 5.454285714285714 liters, or approx. 5.45 liters

Explanation:

P1V2 = P2V2

P1 refers to the original pressure. V1 refers to the original volume, or the amount of space the gas takes up.

P2 and V2 refer to the final pressure or volume, accordingly.

You insert the values into the equation, like so:

(8.3)(46) = (70)(x)

Now, multiply.

381.8 = 70x

Use inverse operations to find the value of x. Divide 381.8 by 70 to isolate x.

381.8/70 = x

5.454285714285714 = x

The volume of the gas when the pressure is increased to 70.0 mm Hg is approximately 5.45 liters. Don't forget about the units at the end, when you write your final answer.

Important! When pressure increases, volume decreases, and vice versa. Volume and pressure for gases are inversely proportional. So even though the pressure increased, that doesn't mean the volume increases, too.

You can check your answers easily!

Just multiply your final answer by its corresponding pressure or volume and compare it to the other. I hope that made sense. Like so:

5.454285714285714 x 70 = 381.8

8.3 x 46 = 381.8

That makes P1V2 DOES equal P2V2, and your answer is correct.

I hope this helped in time for you to submit it before the deadline! Good luck.

Tips!

For #2: I'm pretty sure the mentioning of the temperature (25.0 °C) doesn't matter. You can ignore it, it won't affect your calculations.

For #4: the standard pressure in mm Hg (millimeters of mercury) is 760 mm Hg. That's your P2.

For the reaction :
2NH 3

(g)→N 2

(g)+3H 2

(g)
if rate of disappearance of of NH 3

is 1.7 gm/sec then rate of appearance of N 2

should be:

Answers

The Required Correct Answer for the rate of appearance of N2 is 1.4 g/s.

Explanation : Given reaction is2NH3(g) → N2(g) + 3H2(g)The stoichiometric coefficients of NH3 and N2 in the balanced chemical equation are 2 and 1 respectively, which indicates that one mole of N2 is produced for every 2 moles of NH3 consumed.The rate of disappearance of NH3 is 1.7 g/s.

Number of moles of NH3 disappearing per second can be determined by the following formula:n = m/MwWhere,n = number of moles of NH3 disappearing per secondm = mass of NH3 disappearing per secondMw = molecular weight of NH3.The molecular weight of NH3 is 17 g/mol.

So,m/Mw = 1.7/17= 0.1 mole/sNow we know that 2 moles of NH3 produce 1 mole of N2. Hence, 0.1 mole/s of NH3 will produce (1/2) × 0.1 = 0.05 mole/s of N2The mass of N2 produced can be calculated by using the formula:m = n × MwThe molecular weight of N2 is 28 g/mol.So, m = 0.05 × 28= 1.4 g/s

Therefore, the rate of appearance of N2 is 1.4 g/s.

Learn more about rate of appearance of a reaction here https://brainly.in/question/56331389

#SPJ11

0.1 mL of urine plated out on nutrient agar. After incubation at 37ºC, 279 colonies appeared. Give the CFU/mL. How many CFU are there per 100 mL?

Answers

To calculate the colony-forming units per milliliter (CFU/mL), you need to know the volume plated and the number of colonies counted.

In this case, you plated 0.1 mL of urine and observed 279 colonies after incubation.

CFU/mL can be calculated using the following formula:

CFU/mL = (Number of Colonies / Volume Plated) × Dilution Factor

Since you plated 0.1 mL of urine, the volume plated is 0.1 mL. The dilution factor is assumed to be 1 since no dilution was mentioned.

CFU/mL = (279 colonies / 0.1 mL) × 1

= 2790 CFU/mL

So, there are 2790 CFU/mL of urine.

To calculate the CFU per 100 mL, you can use the following formula:

CFU per 100 mL = CFU/mL × Volume

Since you want to calculate the CFU per 100 mL, the volume is 100 mL.

CFU per 100 mL = 2790 CFU/mL × 100 mL

= 279,000 CFU

Therefore, there are 279,000 CFU per 100 mL of urine.

Learn more about volume here : brainly.com/question/24086520

#SPJ11

Which is the metric standard for measuring energy?

Answers

Answer:

Calorie

Explanation:

This can mesure thermal energy

title = q9a1 The angles in a perfect tetrahedron are 109.5°, and those for a trigonal plane are 120°. Based on its Lewis structure, what would you predict for the bond angles in ammonia, NH3?

Answers

The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.

The bond angles in ammonia, NH3 can be predicted based on its Lewis structure.The tetrahedral molecule has bond angles of 109.5°, and the trigonal plane molecule has bond angles of 120°.The shape of ammonia, NH3, molecule can be determined using its Lewis structure. Ammonia molecule has four electrons pairs and a single bond and thus has a tetrahedral electronic geometry. The three hydrogen atoms are situated at the corners of a triangle with nitrogen in the middle. The molecular shape, which determines the bond angles, is thus trigonal pyramidal.The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.

Learn more about bond angle here:

https://brainly.com/question/31324226

#SPJ11

state one advantage of drinking hard water rather than drinking soft water​

Answers

Answer: Have a great day!

Explanation: Unlike hard water, soft water is free of harsh minerals that can damage your home and your body. In other words, it is more gentle on your body and your home. Without calcium and magnesium, soft water can prevent scale buildup around your home including your appliances and pipes.

Calculate ΔH°298 for the process Co3O4(s) ⟶ 3Co(s) + 2O2(g) from the following information:
Co(s) + 1/2O2(g) ⟶ CoO(s) ΔH°298 = −237.9kJ
3CoO(s) +1/2O2(g) ⟶ Co3O4(s) ΔH°298 = −177.5kJ

Answers

The ΔH° 298 for the process Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g) is -536.2 kJ.

What is the ΔH° of the reaction?

To calculate ΔH° 298 for the process:

Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g)

First, we reverse the second reaction and change the sign of the enthalpy change:

Co₃O₄ (s) ⟶ 3 CoO (s) + 1/2 O₂ (g) :ΔH°298 = +177.5 kJ

Multiply the first reaction by 3 to match the number of CoO(s) in the second reaction:

3 Co(s) + 3/2 O₂ (g) ⟶ 3 CoO(s) ΔH°298 = 3 * (-237.9) kJ = -713.7 kJ

Sum the reactions and their enthalpy changes to obtain the desired reaction:

3 Co(s) + 3/2 O₂(g) + Co₃O₄(s) ⟶ 3 CoO(s) + 1/2 O₂(g) + Co₃O₄ (s) ΔH°298 = -713.7 kJ + 177.5 kJ

ΔH° 298 = -536.2 kJ

Learn more about ΔH° at: https://brainly.com/question/28263454

#SPJ4

The activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later. What is the half-life of the radioisotope??
a) 831hr
b)521hr
c)361 hr
d)1.44hr

Answers

The half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).

Radioisotopes are radioactive isotopes of elements that are used in a variety of applications, including medical imaging and cancer treatment. They are also used in geology and archaeology to determine the age of rocks and artifacts. The activity of a radioisotope is the rate at which it decays, measured in counts per minute (CPM). The half-life of a radioisotope is the amount of time it takes for half of the atoms to decay.

Given that the activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later, we can use the formula A = A₀ (1/2)^(t/T) to find the half-life of the radioisotope.

Where A is the activity after time t, A₀ is the initial activity, T is the half-life, and t is the time elapsed.

Substituting the values given in the problem, we get:

2736 = 3000 (1/2)^(48/T)

Dividing both sides by 3000, we get:

0.912 = (1/2)^(48/T)

Taking the natural logarithm of both sides, we get:

ln 0.912 = ln (1/2)^(48/T)

Using the rule that ln (a^b) = b ln a, we get:

ln 0.912 = (48/T) ln (1/2)

Dividing both sides by ln (1/2), we get:

ln 0.912 / ln (1/2) = 48/T

Using a calculator to evaluate the left-hand side, we get:

3.26 = 48/T

Multiplying both sides by T, we get:

3.26T = 48

Dividing both sides by 3.26, we get:

T ≈ 14.72 hours

Therefore, the half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).

To know more about radioisotope refer here: https://brainly.com/question/13143662#

#SPJ11

The V/Q ratio of a normal upright lunch is 0.8, this indicates that ventilation is _______________ than perfusion.

Answers

The V/Q (Ventilation/Perfusion) ratio of a normal upright lung is 0.8, which indicates that ventilation is less than perfusion.

The V/Q ratio is a measure of the ratio between the amount of ventilation (airflow) reaching the alveoli of the lungs and the amount of blood perfusion (blood flow) in the pulmonary capillaries. In a normal upright lung, the V/Q ratio is 0.8, which means that ventilation is less than perfusion.

Ventilation refers to the movement of air into and out of the alveoli, allowing for gas exchange. Perfusion, on the other hand, refers to the blood flow in the pulmonary capillaries, which carries deoxygenated blood to the lungs for oxygenation.

A V/Q ratio of 0.8 indicates that there is relatively less airflow (ventilation) compared to blood flow (perfusion) in the lung. This can occur in certain areas of the lung where blood flow is relatively high compared to the amount of air reaching those regions. Factors such as gravity and differences in regional blood flow can contribute to this imbalance in ventilation and perfusion.

Learn more about ventilation here:

https://brainly.com/question/31440202

#SPJ11

T/F if you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic.

Answers

If you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic - False

The stomach's pH will rise if a person takes an antacid pill. Antacids neutralise excess stomach acid to treat conditions like gastroesophageal reflux disease, heartburn, and acid indigestion. They usually consist of elements such as calcium carbonate, magnesium or aluminium hydroxide; when coupled with stomach acid, these elements react to form salts and water.

Antacids reduce the acidity of the stomach contents by raising the pH level and neutralising the stomach's acid. This can aid in reducing the symptoms brought on by excessive acid production. Therefore, it is untrue that taking an antacid increases the acidity of the stomach liquid.

Read more about stomach on:

https://brainly.com/question/29812006

#SPJ4

The concentration of A before the reaction below occurs is 0.069 M. If the concentration of A at equilibrium is 0.0276 M, what is the equilibrium constant? 2A (g) 2B (g) + C (g)

Answers

The equilibrium constant (Kc) for the given reaction is approximately 0.475.

In the given reaction: 2A(g) → 2B(g) + C(g), the stoichiometric coefficients of the reactants and products provide insight into the equilibrium constant expression. The equilibrium constant (Kc) expression for this reaction is: Kc = ([B]²[C]) / ([A]²)

Given the initial concentration of A as 0.069 M and the equilibrium concentration of A as 0.0276 M, we can substitute these values into the equilibrium constant expression: Kc = ([B]²[C]) / ([A]²) = ([2 * 0.0276]²) / ([0.069]² = 0.475

Therefore, the equilibrium constant (Kc) for the given reaction is approximately 0.475.

To know more about equilibrium constant, refer here:

https://brainly.com/question/30620209#

#SPJ11

What happens to the amount of carbon dioxide as the population increases?

Answers

Answer:

when population increases the amount of carbon dioxide also increases as population use oxygen and release carbon dioxide

Carbon dioxide is a major greenhouse gas. The increase in the population increases the carbon dioxide amount.

What is the relation between carbon and population?

The main product released from the respiratory process of organisms, especially animals is carbon dioxide. The increase in their population will increase this product.

The increased population will increase the demand for the burning of fossil fuel, pollution, and respiration, and hence the product of these activities, carbon dioxide will increase in the atmosphere.

Therefore, the carbon dioxide will increase with an increase in the population.

Learn more about carbon dioxide and population here:

https://brainly.com/question/10153143

#SPJ2

Which lists the structures, in correct order, through which light passes when it enters the eye?


cones, pupil, lens, sclera

sclera, iris, pupil, lens

vitreous humor, lens, pupil, cornea

cornea, pupil, lens, vitreous humor

hurry plz

Answers

Answer:

cornea, pupil, lens, vitreous humor

Answer:

cornea, pupil, lens, vitreous humor 

Explanation:

Other Questions
Moving to the next question prevents changes to this answe Non-value-added activities O should be reduced or eliminated. O involve resource usage customers are willing to pay for. O increase both the cost and market value of a product. cannot be differentiated from value-added activities. Home's demand curve for wheat is D = 100 - 20P. Its supply curve is S = 20 + 20P. Derive and graph Home's import demand (MD) curve. What would the equilibrium price of wheat be in absence of trade at Home? A hollow metallic ball is created that has an outer diameter of 10 centimeters and thickness of 1 cm in all directions. Which of the following expressions could he used to calculate the volume of metal used in units of cubic centimeters? On Dec 31, 2020, ABC Corp issued 4-year, 7% bonds with $3,000,000 as par value ABC Corp ceved $3,300,000 in cash. The bood intored ispad sy on June 30 and December 31 every year Compute the following: Total bonds premium. Interest paid in cash semiannually. The Semiannual amortization amount of the bond premium Total bonds interest expense over the 4 years. all of these statements about emperor justinian are true except for which one? Product P is formed by components A and B. Component A is formed by parts F and G. Component B is formed by parts G and H. For the following bill of material, if we need to produce 13 units of finished product P, how many units of Part G is required? P A(5) B(3) F(2) G(2) G(5) H(4) Dr. Siddiqui tells Angela that her test results will be back in a few days and that she will give her a call when she knows something. You go home and do some research on various thyroid conditions so that youll have a good idea of what is going on with Angela. You find information on hyperthyroidism, hypothyroidism, goiter, Graves Disease, iodine deficiency (primary hypothyroidism), Hashimotos thyroiditis, and various tumors. You make a chart to help yourself sort out the different disorders.Questions3. Describe hyperthyroidism and hypothyroidism. List at least three symptoms of each.4. What is a goiter? 1. How do you think greenhouse gas emissions and global climate will change during the next 50 years? 2. If greenhouse gas emissions and global temperatures continue rising, what other changes might you expect to see throughout the world? 3. Humans are working to reduce the amount of greenhouse gases released into the atmosphere, but are their current solutions going to make a big enough impact? 4. In addition to reducing human dependence on fossil fuels, what other solutions could help combat greenhouse gas emissions and global warming? Tappan was one of the first Icahns investments, why Carlinvested in it? Which was the stocks price and value according toIcahn? Each of the following gross profit percentages isexpressed in terms of cost.1. 20%2. 25%.3. 33%.4. 50%.InstructionsIndicate the gross profit percentage in terms of sales for each of the above 1. Project goal setting includes setting a baseline plan, whichis predicated on: Select one:a. an accurate work breakdown structure.b. the type of gap analysis the project team plans to use.c. the If money earns 4.14% compounded quarterly, what single paymentin three years would be equivalent to a payment of $3,980 due threeyears ago, but not paid, and $800 today?Answer:Round to the nearest Fill in the blank The integral 81-16x dx is to be evaluated directly and using a series approximation. (Give all your answers rounded to 3 significant figures.) Evaluate the integral exactly, using a substitution in the form axsin 0 and the identity cosx = (1 + cos2x). Enter the value of the integral: __ b) Find the Maclaurin Series expansion of the integrand as far as terms in x Give the coefficient of x in your expansion:___ c) Integrate the terms of your expansion and evaluate to get an approximate value for the integral. Enter the value of the integral:__ Proper implementation of dlp solutions for successful function requires:___________ A television campaign is conducted during the football season to promote a well-known brand X shaving cream. For each of severalweeks, a survey is made, and it is found that each week, 90% of those using brand X continue to use it and 10% switch to another brand. It is also found that of those not using brand X, 10% switch to brand X while the other 90% continue using another brand. (A) Draw a transition diagram. (B) Write the transition matrix. (C) If 10% of the people are using brand X at the start of the advertising campaign, what percentage will be using it 1 week later? 2 weeks later? 1. A 15-year bond with a 6.10% coupon rate was issued with a 7.09% yield to maturity. Find the bond price at time of issue. a. $909 b. $751 c. $1,000 d. $826 e. $683 find the -intercept of the graph of the equation: 3 5 = 30 assume that the tire division has excess capacity, meaning that it can produce tires for the tractor division without giving up any of its current tire sales to outsiders. If Greely Motors has a negotiated transfer price policy, what is the lowest acceptable transfer price? What is the highest acceptable transfer price? (5 points) Use your own words to briefly discuss at least five different applications of equity valuation. In other words, how equity valuation is applied in practice? (5 points) If an investor buys shares in a closed-end investment company for $46 and the net asset value is $53, what is the discount? If the company distributes $1, the net asset value rises to $58, and the investor sells the shares for a premium of 5 percent over the net asset value, what is the percentage earned on the investment?If an investor buys shares in a closed-end investment company for $46 and the net asset value is $53, what is the discount? If the company distributes $1, the net asset value rises to $58, and the investor sells the shares for a premium of 5 percent over the net asset value, what is the percentage earned on the investment?