an anticodon strand reads 5'–gcg–3'. fill in the missing base sequences for the possible codons recognized by the anticodon.

Answer:

I think it's trees

Explanation:

I'm not 100% sure tho

Answer:

Its a 50% chance of it happeing

Explanation:

To calculate the pH when 9.0 mL of 0.150 M KOH is mixed with 20.0 mL of 0.300 M HBrO (Ka = 2.5 × 10⁻⁹), we need to consider the reaction between KOH and HBrO.

The reaction between KOH (potassium hydroxide) and HBrO (hypobromous acid) can be written as follows:

KOH + HBrO → KBrO + H₂O

Initially, we have 9.0 mL of 0.150 M KOH and 20.0 mL of 0.300 M HBrO. To calculate the pH, we need to determine the final concentrations of the species involved in the equilibrium. Let's assume that the reaction goes to completion, meaning all the KOH and HBrO react completely.

First, we need to find the moles of KOH and HBrO.

For KOH:

Moles of KOH = volume (L) × concentration (mol/L)

Moles of KOH = 9.0 mL × (1 L / 1000 mL) × 0.150 mol/L

For HBrO:

Moles of HBrO = volume (L) × concentration (mol/L)

Moles of HBrO = 20.0 mL × (1 L / 1000 mL) × 0.300 mol/L

Next, we need to consider the stoichiometry of the reaction. Since KOH and HBrO react in a 1:1 ratio, the moles of KOH and HBrO will be equal in the balanced equation. Let's assume the moles of KOH and HBrO are both "x".

Now, we can set up an equilibrium expression for the reaction between HBrO and water:

Ka = [KBrO][H₂O] / [HBrO]

Using the given Ka value (2.5 × 10⁻⁹), we can substitute the concentrations:

2.5 × 10⁻⁹ = x² / (0.150 - x)

Since x is much smaller compared to 0.150, we can simplify the expression by assuming that (0.150 - x) ≈ 0.150:

2.5 × 10⁻⁹ ≈ x² / 0.150

Rearranging the equation, we find:

x² ≈ 2.5 × 10⁻⁹ × 0.150

x² ≈ 3.75 × 10⁻¹⁰

Taking the square root of both sides, we get:

x ≈ √(3.75 × 10⁻¹⁰)

x ≈ 6.12 × 10⁻⁶

This value represents the concentration of H₃O⁺ ions. Now, we can calculate the pH using the equation:

pH = -log[H₃O⁺]

Plugging in the value for [H₃O⁺], we find:

pH = -log(6.12 × 10⁻⁶)

pH ≈ 5.21

Therefore, when 9.0 mL of 0.150 M KOH is mixed with 20.0 mL of 0.300 M HBrO, the pH of the resulting solution is approximately 5.21

To learn more about koh - brainly.com/question/31329625

#spj11

Answer: Cr(s) + HCl(aq) ⇒ CrCl3 (aq) + H2(g)

Explanation:

Answer:

To show what they know!

Explanation:

If you're not showing how you did your experiment thoroughly, then nobody will understand what you did! For instance, if you spent 2 weeks studying really hard about how music affects different kinds of animals, and only put down that music affects animals and no showing your work. Then no one will know how much effort and work you put into it! If you put all the minor details into the presentation, then more than likely everyone will know where your coming from!

Hope this helps! Plz mark as brainliest!

5.25 moles

Chemistry

Atomic Structure

Aqueous Solutions

Stoichiometry

Step 1: Define

[RxN - Balanced] 2KClO₃ (s) → 2KCl (s) + 3O₂ (g)

[Given] 3.50 mol KClO₃

[Solve] mol O₂

Step 2: Identify Conversions

[RxN] 2 mol KClO₃ (s) → 3 mol O₂ (g)

Step 3: Stoichiometry

Answer:

jwjsjdjdhdvjeiejjrjrje

The solubility of MgCO3 in water at 25°C, given the Ksp is 4.0 × 10−5 is 2 × 10^-3 M.

The chemical equation of magnesium carbonate is MgCO3.

The solubility of MgCO3 is x.

The Ksp value of MgCO3 is 4.0 × 10^-5.

We have to calculate the solubility of MgCO3 in water at 25°C.

The solubility product of MgCO3 is given as:

Ksp = [Mg2+][CO32-]Ksp = [Mg2+][CO32-] = (x)(x) = x2Ksp = 4.0 × 10^-5=x^2x = √Ksp = √4.0 × 10^-5=2 × 10^-3 M

Therefore, the solubility of MgCO3 in water at 25°C, given the Ksp is 4.0 × 10−5 is 2 × 10^-3 M.

Know more about solubility :

https://brainly.com/question/31493083

#SPJ11

Answer:

4.1g of Cr will make (317/104) x 4.1 = 12.5g of CrCl3

Answer:

Dipole-dipole

Explanation:

Barium nitrate is toxic if ingested or inhaled, while silver nitrate is corrosive and can cause severe skin and eye irritation.

Barium nitrate is toxic if ingested or inhaled, posing risks to the respiratory, cardiovascular, and nervous systems. It can also harm aquatic life if released into water bodies. Silver nitrate is corrosive and can cause severe irritation and burns to the skin and eyes. To properly dispose of these chemicals, consult local waste management authorities for specific guidelines. Follow any recommended neutralization procedures, use suitable containers for storage, and label them clearly with the contents and hazards. Engage a licensed waste disposal company or hazardous waste facility to ensure proper collection and disposal. Adhering to local regulations and best practices is crucial to minimize the environmental and health risks associated with these chemicals.

Learn more about Silver Nitrate,Click on the link below:
https://brainly.com/question/5764610

#SPJ4

Approximately 4.41 mg of the sodium-24 sample will remain after 3.7 days.

Part A - Hydrogen-3 decay. The half-life of Hydrogen-3 is 12.3 years, and we have to find the time that would take for 539.3 mg 3^H to decay to 2.1 mg 3^H. Let's use the formula given below and find out how many years it will take. Amount = Initial amount * (1/2)^(Time/half life). Initial amount = 539.3 mg. The amount left = 2.1 mg. Time = ?Half-life = 12.3 years. Amount left/Initial amount = (1/2)^(Time/half-life)2.1/539.3 = (1/2)^(Time/12.3)log(2.1/539.3) = log(1/2)^(Time/12.3)(Time/12.3) = log(539.3/2.1) / log2. Time = 12.3 * log(539.3/2.1) / log2Time = 12.3 * 11.3949 / 0.30103. Time = 466.95 years. Therefore, it would take approximately 466.95 years for 539.3 mg 3^H to decay to 2.1 mg 3^H.

Part B - Sodium-24 decay. The half-life of Sodium-24 is 14.8 hours. Let's find out how much of a 563.3 mg sodium-24 sample will remain after 3.7 days. Initial amount = 563.3 mg. Half-life = 14.8 hours. We need to find the amount left after 3.7 days (88.8 hours). Amount = Initial amount * (1/2)^(Time/half-life). Amount = 563.3 * (1/2)^(88.8/14.8)Amount = 563.3 * (1/2)^6Amount = 4.41 mg. Therefore, approximately 4.41 mg of the sodium-24 sample will remain after 3.7 days.

know more about sodium-24

https://brainly.com/question/12658980

#SPJ11

Answer:

Since the iodine-iodine bond is a pure covalent bond, iodine is a non-polar molecule. The electronegativity difference between the two Iodine atoms is zero.

does this help???

1= b. electrons are lost

2= a. after one substance is oxidized

Answer:

18929eu9sisjwiejwjxjjejxme

Answer: Both are compounds

Explanation:

[tex]\text{N}_{2}[/tex] is an element, not a compound.

1.50 mol of C are produced from the reaction of 1.00 mol A and 1.00 mol B.

The balanced chemical equation for the given reaction is A(g) + 2 B(g) → 3 C(g). This equation can be used to determine the number of moles of C produced from the reaction of 1.00 mol A and 1.00 mol B. The limiting reactant concept must be considered to solve this problem.Limiting reactant:The limiting reactant is the reactant that is completely consumed in a chemical reaction. In other words, the reactant that runs out first limits the amount of product that can be formed.To determine the limiting reactant, the stoichiometry of the chemical reaction must be used. This involves using the mole ratios from the balanced chemical equation to determine how much product can be formed from each reactant.Let's calculate the number of moles of C that can be produced from 1.00 mol A:A(g) + 2 B(g) → 3 C(g)Molar ratio of A to C = 1 : 3From the balanced equation, 1 mol of A produces 3 mol of C. Therefore, 1.00 mol A will produce 3.00 mol C.Let's calculate the number of moles of C that can be produced from 1.00 mol B:A(g) + 2 B(g) → 3 C(g)Molar ratio of B to C = 2 : 3From the balanced equation, 2 mol of B produces 3 mol of C. Therefore, 1.00 mol B will produce 1.50 mol C.The actual amount of product that can be formed is limited by the smaller of these two values. In this case, 1.50 mol C is the smaller value, so 1.50 mol C is produced from the reaction of 1.00 mol A and 1.00 mol B.Answer:1.50 mol of C are produced from the reaction of 1.00 mol A and 1.00 mol B.

Learn more about reaction here:

https://brainly.com/question/30464598

#SPJ11

To assess the advantages and disadvantages of different measuring devices, specific devices need to be mentioned. Without specific devices, a comprehensive analysis of their advantages and disadvantages is not possible.

The advantages and disadvantages of measuring devices vary depending on the specific device and its application. Different devices have unique features and limitations that affect their accuracy, precision, ease of use, and suitability for different measurements. For example, consider two commonly used measuring devices: a ruler and a digital caliper. A ruler, while simple and inexpensive, may have limitations in terms of precision and accuracy due to human error in reading the markings. On the other hand, a digital caliper offers higher precision and accuracy, as it provides digital readouts and can measure small distances with greater precision. However, digital calipers may be more expensive and require batteries for operation.

Other factors to consider when evaluating measuring devices include durability, range of measurements, calibration requirements, ease of calibration, portability, and the specific needs of the measurement task at hand. To provide a more detailed analysis, it would be helpful to specify the measuring devices being compared.

Learn more about operation here: https://brainly.com/question/30415374

#SPJ11

The 900 W carbon-dioxide laser emits light with a wavelength of 10 μm into a 3.0 mm diameter laser beam. This means that the laser is producing a high-power output in the infrared region of the electromagnetic spectrum.

The wavelength of 10 μm corresponds to the mid-infrared range, which is commonly used in various applications such as industrial cutting and welding, medical procedures, and scientific research.

The 3.0 mm diameter laser beam represents the spatial profile of the laser output. It indicates that the laser beam has a relatively small cross-sectional area, allowing for focused and concentrated energy delivery.

The combination of a high-power output and a specific wavelength allows the carbon-dioxide laser to efficiently perform tasks that require precision and controlled energy deposition, making it suitable for a wide range of industrial and scientific applications.

To know more about electromagnetic spectrum, refer here:

https://brainly.com/question/23727978#

#SPJ11

The molar mass of the unknown monoprotic acid will be approximately 100 g/mol.

To determine the molar mass of unknown monoprotic acid, we will use the concept of stoichiometry.

First, let's calculate the number of moles of NaOH used in the titration:

Moles of NaOH = concentration of NaOH × volume of NaOH used

= 0.150 mol/L × 0.02200 L

= 0.00330 mol

Since the acid and base have a 1-to-1 molar ratio, the number of moles of the unknown acid is also 0.00330 mol.

Next, let's calculate the molar mass of the unknown acid:

Molar mass of the unknown acid = mass of the unknown acid / moles of the unknown acid

We are given the mass of the unknown acid as 0.330 grams and the moles of the unknown acid as 0.00330 mol.

Molar mass = 0.330 g / 0.00330 mol

= 100 g/mol

Therefore, the molar mass is 100 g/mol.

To know more about molar mass here

https://brainly.com/question/12127540

#SPJ4

Answer: The main difference between oxide and oxygen is that oxide is a chemical compound with at least one oxygen atom while oxygen is an element whose atomic number is 8.

Explanation: let me know if it was right or wrong

Answer:

See explanation

Explanation:

When an a heavy object and a light object are thrown down from the same height, the two objects are expected to hit the ground at the same time since the two objects are both accelerated to the same extent (approximately 10m/s^2) under gravity.

However, due to air resistance, the heavier object reaches the ground first before the lighter object.

Hence, when we drop a feather and a stone at the same time from a height the stone will hit the ground faster than the feather.

The equilibrium constant for the given reaction is 0.93 (to two significant figures). Hence, the answer is 0.93.

Given, spontaneous reaction between Sn2(aq) and Fe(s) is:Sn2(aq) + Fe(s) → Sn(s) + Fe2+(aq)The standard reduction potentials for Sn2+(aq) and Fe2+(aq) are given as:Sn2+(aq) + 2e- → Sn(s); E°red = -0.14 VFe2+(aq) + 2e- → Fe(s); E°red = -0.44 VThe cell potential (E°cell) for the spontaneous reaction can be calculated using the formula: E°cell = E°reduction at cathode - E°reduction at anodeE°cell = E°red of Fe2+ - E°red of Sn2+E°cell = (-0.44 V) - (-0.14 V)E°cell = -0.3 VThe standard equilibrium constant (K°) can be calculated using the relation: ΔG° = -RTlnK°Here, ΔG° is the change in Gibbs free energy for the reaction, R is the gas constant, and T is the temperature in Kelvin.Assuming T = 298 K, we can use R = 8.314 J/mol*K.ΔG° = -nFE°cellHere, n is the number of electrons transferred in the reaction and F is the Faraday constant (96485 C/mol).n = 2 for the given reaction.ΔG° = -2 * 96485 C/mol * (-0.3 V)ΔG° = 58.32 kJ/molSubstituting the values of R, T, and ΔG° in the equation ΔG° = -RTlnK°, we get:lnK° = -ΔG°/RTlnK° = -(58.32 kJ/mol) / (8.314 J/mol*K * 298 K)lnK° = -0.0737K° = e-lnK°K° = e0.0737K° = 0.93The equilibrium constant for the given reaction is 0.93 (to two significant figures). Hence, the answer is 0.93.

To know more about equilibrium constant visit:

https://brainly.com/question/32113268

#SPJ11

The noble gases have a full outer shell of valence electrons, making them stable and unreactive. They are colorless, odorless gases at room temperature and have very low boiling points. Their lack of reactivity makes them useful in a variety of applications, including lighting and welding.

The properties that are common to each of the following chemical families include:

(a) Alkali metals The alkali metals have a single valence electron in their outermost shell, which is easily lost to form an ion with a charge of +1. They are the most reactive metals, reacting with water and air to produce hydrogen gas and an oxide layer, respectively. They are silvery-white and have a soft texture.

(b) Alkaline earth metals The alkaline earth metals have two valence electrons in their outermost shell, which they readily lose to form ions with a charge of +2. They are less reactive than the alkali metals, but they still react with oxygen to form an oxide layer on their surface. They are also silvery-white in color and have a harder texture than the alkali metals.

(c) Halogens The halogens have seven valence electrons in their outermost shell, making them highly reactive nonmetals. They readily form ions with a charge of -1 by gaining an electron. They are diatomic molecules at room temperature and can be found in a variety of colors and states of matter.

(d) Noble gases The noble gases have a full outer shell of valence electrons, making them stable and unreactive. They are colorless, odorless gases at room temperature and have very low boiling points. Their lack of reactivity makes them useful in a variety of applications, including lighting and welding. These properties are common to each of the following chemical families.

To know more about noble gases visit:-

https://brainly.com/question/19024000

#SPJ11

Entropy is a measure of the disorder of a system. It is the measure of the number of possible arrangements (or microstates) of the system, multiplied by Boltzmann's constant.

A higher number of arrangements results in greater entropy. The system with the greatest entropy is that which has the greatest number of arrangements.The system with the greatest entropy is 1 mol of methane gas at 273 K and 40 L. At this state, the gas is present in a larger volume and hence has more microstates, making it more disordered than any other state. Therefore, the greatest entropy is obtained from this system. Next in the rank is 1 mol of helium gas at 273 K and 40 L. Hydrogen gas, 1 mol at 273 K and 40 L, follows helium gas at 273 K and 40 L in rank. 1 mol of helium gas at 273 K and 20 L ranks lower in the list than hydrogen gas. The next state with the lowest entropy is 1/2 mol of helium gas at 273 K and 20 L, followed by 1/2 mol of liquid helium at 100K. The state with the lowest entropy is 1/2 mol of helium gas at 100 K and 20 L. Therefore, the systems in order of decreasing entropy are:

1. 1 mol of methane gas at 273 K and 40 L
2. 1 mol of helium gas at 273 K and 40 L
3. 1 mol of hydrogen gas at 273 K and 40 L
4. 1 mol of helium gas at 273 K and 20 L
5. 1/2 mol of helium gas at 273 K and 20 L
6. 1/2 mol of liquid helium at 100 K
7. 1/2 mol of helium gas at 100 K and 20 L

To know more about entropy visit:

https://brainly.com/question/31953056

#SPJ11

The molarity of the solution is 2 mol/L, and the osmolarity of the solution is 8 osmol/L (D).

Molarity is defined as the number of moles of solute per liter of solution. In this case, we have 2 moles of iron chloride (FeCl3) dissolved in a final volume of 1 liter of water. Therefore, the molarity of the solution is:

Molarity = moles of solute / volume of solution

Molarity = 2 mol / 1 L

Molarity = 2 mol/L

Osmolarity, on the other hand, takes into account the number of particles in a solution that can contribute to osmotic pressure. Iron chloride dissociates into ions in water, forming Fe3+ and 3 Cl- ions. So, each mole of FeCl3 dissociates into 4 particles (1 Fe3+ ion and 3 Cl- ions).

Since we have 2 moles of FeCl3, the total number of particles in the solution is 2 mol x 4 particles/mol = 8 particles. Osmolarity is calculated by dividing the total number of particles by the volume of the solution:

Osmolarity = total particles / volume of solution

Osmolarity = 8 particles / 1 L

Osmolarity = 8 osmol/L

Therefore, the correct answer is option D: Molarity of 2 mol/L and osmolarity of 8 osmol/L.

Learn more about molarity: https://brainly.com/question/30404105

#SPJ11