3n^2-5n-6=9 help please!

The required top of the ladder from the ground is 7.14 ft.

A triangle is said to be right-angled if one of its internal angles is 90 degrees, or if any angle is a right angle.

To find the length in right angle triangle, use Pythagoreans theorem,

(hypotenuse)² = (base)² + (height)²

Given that,

The length of the ladder = 10 ft.

The distance of the house from the bottom of the ladder = 7 ft.

Let the length of the top of the ladder from ground is x ft.

To find the height of the ladder  from the ground,

Use Pythagoreans theorem,

(hypotenuse)² = (base)² + (height)²

(10)² = (7)² + (x)²

100 = 49 + x²

x² = 100 - 49

x² = 51

x = 7.1414

or x = 7.14 ft

The top of the ladder from the ground is 7.14 ft.

To know more about Triangle on :

https://brainly.com/question/2773823

#SPJ1

If 3 < a < 4 and 4 then, 3 < a ≤ 4 is the relationship.

Inequality is a relation that compares two numbers or other mathematical expressions in an unequal way.

The symbol a < b indicates that a is smaller than b.

When a > b is used, it indicates that a is bigger than b.

a is less than or equal to b when a notation like a ≤ b.

a is bigger or equal value of an is indicated by the notation a ≥ b.

Given, A number 'a' which is 3 < a < 4 and 4.

This implies that the number 'a' is less than or equal to 4.

∴ 3 < a ≤ 4.

Q. Suppose  3 < a < 4 and a is also equal to 4, write this statement in inequality form.

learn more about inequalities here :

https://brainly.com/question/28823603

#SPJ1

The value of the decrease percentage of elephant weight is 15%.

A percentage is a value that indicates 100th part of any quantity. A percentage can be converted into a fraction or a decimal by dividing it by 100.

The original weight of elephant is 14000 pounds.

And, the drop in weight is 2100 pounds.

Now, the percent value of the drop in weight is calculated as follows

Percent drop = Drop in weight / Original weight × 100

⇒ 2100/14000 × 100

⇒ 15%

Hence, the percent of decrease in weight is given as 15%.

To know more about percentage click on,

brainly.com/question/29306119

#SPJ1

The correct answer is (C) 0.8. The correlation between two scores X and Y is equal to 0.8. If both the X scores and the Y scores are multiplied by 2, the correlation of the transformed scores would be 0.8.

The correlation between two variables measures the strength and direction of the linear relationship between them. It is calculated as the covariance of the two variables divided by the product of their standard deviations. When both the X scores and the Y scores are multiplied by 2, the covariance and standard deviations of the transformed scores are also multiplied by 2. Therefore, the correlation between the transformed scores is equal to the correlation between the original scores.

In this case, the correlation between the original scores is 0.8, and the correlation between the transformed scores is also 0.8.

Learn more about Standard Deviation here:

https://brainly.com/question/24298037

#SPJ4

9/10 is the possible outcome that has a number less than 3 or an A.

What is probability?

The proportion of possible outcomes to outcomes in an exhaustive set of equally likely alternatives that result in a certain event.

Here, we have

A spinner is divided into five equal sections labeled 1, 2, 3, 4, and 5. Another spinner is divided into two equal sections labeled A and B.

We have to find how many of the possible outcomes have a number less than 3 or an A.

Denote A the first event and B the second event:

P(A∪B) = P(A) + P(B)

A = Get a number less than 3

P(A) = 2/5

B = Get section A

P(B) = 1/2

Then,

P(A∪B) = 2/5 + 1/2

P(A∪B) = 9/10

Hence, 9/10 is the possible outcome that has a number less than 3 or an A.

To learn more about the probability from the given link

https://brainly.com/question/24756209

#SPJ1

The length of diameter of the base of the cone will be 112 cm. Hence, option b is correct.

Given data :

As per the given information in the question,

Use the equation of Pythagoras's theorem,

106² = 90² + r²

r² = 106² - 90²

r = √3136

r = 56 cm.

Then, the diameter will be,

D = 2r

D = 2(56)

D = 112 cm.

Learn more about equation of Pythagoras's theorem refer to :

https://brainly.com/question/24408180

#SPJ1

Answer:

To find the coordinates of the vertices of triangle BCD after it is scaled by a factor of 3, centered at the origin, you would first need to find the coordinates of the vertices of the triangle when it is centered at the origin. This can be done by subtracting the coordinates of the original centroid, which is the point (3.33, -0.66) for triangle BCD, from the coordinates of each vertex. So the coordinates of vertex B would be (2 - 3.33, -1 + 0.66) = (-1.33, -0.34), the coordinates of vertex C would be (4 - 3.33, 1 - 0.66) = (0.67, 0.34), and the coordinates of vertex D would be (5 - 3.33, -2 + 0.66) = (1.67, -1.34).

To scale the triangle by a factor of 3, you would multiply the coordinates of each vertex by 3. So the coordinates of the scaled triangle would be (-3.99, -1.02) for vertex B, (2.01, 1.02) for vertex C, and (5.01, -4.02) for vertex D.

Therefore, the coordinates of the vertices of triangle BCD after it is scaled by a factor of 3, centered at the origin, would be (-3.99, -1.02), (2.01, 1.02), and (5.01, -4.02).

A true statement for all genes , given Dr. Bert Vogelstein study on cancer , is D . They code for proteins with the same amino acid sequence .

Genes need a code in order to be able to produce proteins . The genetic code is the code that converts the data stored in DNA and RNA into organized amino acids and proteins . Additionally, every living thing has the same genetic code .

The reason for this, according to scientists, is that every single living organism , has a common evolutionary history .

Find out more on genes at https://brainly.com/question/11732263

#SPJ1

Answer:

a. Angles x and y are supplementary because they are same side interior angles.

Angles x and y are supplementary because they are same side interior angles.

A line that goes through two lines in the same plane at two different points is called a transversal. When determining whether two or more other lines in the Euclidean plane are parallel, transversals play a role. Different kinds of pairs of angles are created when two lines intersect a transversal: alternate angles, corresponding angles, consecutive exterior angles, and consecutive interior angles. If the two lines are parallel, Euclid's parallel postulate states that consecutive interior angles are supplementary, that corresponding angles are equal, and that alternate angles are equal.

Given lines are parallel and cut by a  transversal,

and to find the statement for x and y

in figure x and y are interior side of both lines

statement for x and y is

Interior angles on the same side of a transversal are supplementary if it cuts through two parallel lines. Exterior angles on the same side of a transversal are supplementary if it cuts through two parallel lines.

Hence x and y are supplementary angles.

Learn more about transversal;

https://brainly.com/question/17987539

#SPJ2

The domain and range of the function are (-∞,∞) and (-∞,5). The greatest concentration will be 5.

The set of all values that a function can accept is known as its range, while the set of all values for which a function is defined is known as its domain.

The dependent variable's range is its domain, which is for the independent variable.

Part (A)

As per the given function C(t) = - 5t² + 10t

C'(t) = 0

-10t + 10 = 0

10t = 10

t = 1

C''(t) = -10 < 0

So, at t = 1 the function will be maximum.

C(1) = -5(1)² + 10 x 1 = 5

Thus, the range will be (-∞,5) and the domain will be (-∞,∞).

The range represents the amount of concentration while the domain is the time.

Part (B)

The graph of the function has been drawn below.

At t = 1 the C(t) is maximum as 5 thus it will be the maximum concentration.

Hence"The function's domain and range are  (-∞,∞) and (-∞,5), respectively. Five will have the highest concentration.".

For more details about the range and domain of the function,

brainly.com/question/28135761

#SPJ1

Answer: x<5. Work shown below! :)

The values are satisfied by

X  -5    -4    -3    -2    -1      

Y -5     -3     -1      1     3

Given data :

Y= 2X +5

let us put the value for X

X= 0

Y = 5

and, X=1

Y = 2 + 5 = 7

and, X= 2

Y= 4 + 5 = 9

and, X=3

Y = 6 + 5 = 11

and, X= 5

Y = 10 + 5= 15

and, X= -1

Y= -2 + 5 = 3

Hence, these values are satisfied by

x      y

-5    -5

-4    -3

-3    -1

-2     1

-1      3

Learn more about graph a function refer to :

https://brainly.com/question/24335034

#SPJ1

The cost of admission for a group of 4 people is $160

From the question, we have the following parameters that can be used in our computation:

C = 40 p

Where p is the number of people

For a group of 4 people, we have

p = 4

Substitute p = 4 in the equation C = 40 p

So, we have the following representation

C(4) = 40 * 4

Evaluate the products

C(4) = 160

hence, the cost is $160

Read more about linear functions at

https://brainly.com/question/15602982

#SPJ1

In a chi-square test for homogeneity of proportions,we test whether different populations have the same proportion of individuals with some characteristic.

Used to test whether different populations have the same proportion of individuals with a particular trait. Suppose we have three populations with four mutually exclusive characteristics. Randomly sample each population and create a crosstabulation or frequency table of the traits you are measuring. If you want to test whether there is an association between a population and a trait (for example, whether the population has a high frequency of one trait), perform a chi-square test to see if the result is significant must be confirmed.

If the chi-square test is significant, it only tells us that there is some relationship between the population and the trait, not how they are related. Also, not all traits need to be population related. For example, the chi-square test can be considered significant even if features A and B have very different distributions, and C and D have very different distributions, for different populations. If you want to measure whether a particular trait is influenced by the population, use an equal proportions test (I call it the z-test, or prop.test() in R) for exactly that trait. You can do. In other words, if the chi-square test reveals a significant relationship, it is appropriate to use prop.test() to more accurately determine the nature of the relationship between the two sets of categories.

To learn more about chi-square test for proportions, refer:

https://brainly.com/question/16817499

#SPJ4

Answer:

I'm pretty sure the answer is 24.024

Step-by-step explanation:

300meters = 9 minutes

300+300=600

2/3 of 300=24minutes

800÷50=16

800÷33.3=24.024 minutes

Answer:

----------------------

Since Amy can swim 6 laps in 9 minutes, then it takes:

Number of laps in 800 m:

Time to swim 16 laps:

If an organization selects 3 students to represent the district, the standard divisor needed to be eligible for representation of the region is 228.

The standard divisor is computed as the quotient of the total population divided by the number of representative seats required to be distributed.

The standard divisor explains the number of persons represented by a seat.

Regions     Number of Students

Region 15               315

Region 16              148

Region 17              221

Total number =    684

Number of students to represent the district = 3

Standard divisor = 228 (684 ÷ 3)

Learn more about the standard divisor at https://brainly.com/question/17112402

#SPJ1

When you multiply the diameter by 22/7,  you find the approximate not exact circumference of a circle.

What is the Circumference of a circle?

The circumference of the circle or the perimeter of the circle is the measurement of the boundary of the circle. Whereas the area of the circle defines the region occupied by it.

Pi ( written as the Geek letter π) is a universal constant found by dividing the circumference of a circle by its diameter. So if you measure the diameter of a circle you can calculate its circumference by multiplying by π.

Circumference = π * diameter.

It's value to the nearest hundredth is 3.14 but its actual value is a decimal number that goes on without bounds. That is in Maths it is irrational and can't be written accurately as a fraction.

For example:

What is the circumference of a circle that has a radius of 7cm?

Approximately 22 cm.

Exactly 7πcm

The ratio between the circumference of a circle and its diameter is π. We commonly write c=2π r, using the radius instead and doubling it.

One is 22/7, which is common in use and the other is 355113 ≈ 3.1415929,

which is less well-known but very accurate for the number of digits you have to remember.

In the given example, we are told that the diameter is 7 cm.

So using the common approximation π ≈ 22/7,

we find that the circumference is approximately:

(22/7)* 7 cm

= 22cm

Hence, when you multiply the diameter by 22/7,  you find the approximate not exact circumference of a circle.

To learn more about Intersecting Circumference of a circle visit,

https://brainly.com/question/18571680

#SPJ1

The required cost for the ride in the Metro is obtained as $5.

The total cost can be calculated by multiplying the cost for one unit to the number of units.The cost for one unit is also called as unit rate. This method is based on the unitary method which states that the value of n number of quantities is equal to the product of n and the value of one quantity.

The cost of the ticket is given as $2.

And, the cost per stop is $0.50.

Now, in order to find the total cost of riding for 6 stops take the sum of fixed cost of ticket and the total cost for 6 stops as follows,

The cost of ticket + The cost for 6 stops

= 2 + 6 × 0.50 = 5

Hence, the cost for the total ride of the rider is $5.

To know more about total cost click on,

https://brainly.com/question/14927680

#SPJ1

given that v1,v2 ,v3,v4 is linearly independent vector so in order for a set of vectors to be linearly independent it must satisfy the below conditon:

   [tex]x_1v1+x_2v2+x_3v3+x_4v4[/tex] =0  --(i)

  where [tex]x_1, x_2,x_3 ,x_4[/tex] is some real numbers.

a) so in order to show that v1,v2+v4,v3 is linearly independent we have to

check if equations formed by these vectors can be transformed into some equation of equation (i) form.

 so we have :

   [tex]x_1v1+x_2(v2+v4) +x_3v3[/tex]   ---(ii)

    where [tex]x_1, x_2,x_3[/tex] is some real numbers.

  after evaluating equation (ii) we have:

     [tex]x_1v1+x_2v2+x_3v3+x_2v4[/tex]  

     so the above equation is now transformed in the form of equation (i) where [tex]x_2 = x_4[/tex]  

and hence [tex]x_1v1+x_2v2+x_3v3+x_2v4[/tex] =0  ----(iii)

equation (iii) shows that the set of given vectors are linearly independent.

b)  so in order to show that v1 +v2, v3, v4  is linearly independent we have to check if equations formed by these vectors can be transformed into some equation of equation (i) form.

 so we have this equation:

   [tex]x_1(v1+v2)+ x_2v3 + x_3v4[/tex]      where [tex]x_1, x_2,x_3[/tex] is some real numbers.

  after evaluating equation (iv) we have:

     [tex]x_1v1+x_1v2+x_2v3+x_3v4[/tex]  

     so the above equation is now transformed in the form of equation (i) where the cofficient of v2 is also [tex]x_1[/tex]  

and hence [tex]x_1v1+x_1v2+x_2v3+x_3v4[/tex] =0  ----(v)

equation (v) shows that the set of given vectors are linearly independent.

To know more about vector click on below link:

https://brainly.com/question/15709504#

#SPJ4

Complete question :

let v be a real vector space. suppose that v1, v2, v3, v4 are vectors in v which are linearly independent. show that the vectors a) v1, v2+v4, v3 and   b) v1 +v2, v3, v4 are also linearly independent.

The vectors v1, v1+v2, v1+v2+v3, v1+v2+v3+v4 are also linearly independent is hence proved.

let v be a real vector space.

The v1, v2, v3, v4 are vectors in v which are linearly independent.

V={v1, v2, v3, v4} then set V is called  linearly independent if [tex]\forall \alpha_i \in F \\[/tex].

∝1v1+∝2v2+∝3v3+..........+∝nvn=0

then, [tex]\forall \alpha_i =0 \\[/tex] i=1,2,3......n.

let ∝1,∝2,∝3,∝4 ε F

∝1v1+∝2(v1+v2)+∝3(v1+v2+v3)+∝4(v1+v2+v3+v4)=0

v1(∝1+∝2+∝3+∝4)+v2(∝2+∝3+∝4)+v3(∝3+∝4)+v4.∝4=0

Since  v1, v2, v3, v4 are linearly independent vectors.

So ∝1+∝2+∝3+∝4=0......(1)

∝2+∝3+∝4=0....(2)

∝3+∝4=0....(3)

∝4=0...(4)

Solving eq(1), (2), (3), (4)

we get ∝1=∝2=∝3=∝4=0

So according to definition of linearly independent vectors.

A set of vectors is called linearly independent if no vector in the set can be expressed as a linear combination of the other vectors in the set. If any of the vectors can be expressed as a linear combination of the others, then the set is said to be linearly dependent.

So v1, v1+v2, v1+v2+v3, v1+v2+v3+v4 are also linearly independent vectors hence proved.

For more such questions about linear independent vector

https://brainly.com/question/23878734

#SPJ4

Answer:

  y -3 = -3(x +1)

Step-by-step explanation:

You want an equation for the line parallel to y=-3x+2 through the point (-1, 3).

The given line is written in slope-intercept form:

  y = mx +b . . . . . . . where m is the slope and b is the y-intercept

Matching your equation to this form, we see that ...

The parallel line will have the same slope: m = -3.

Another form of the equation for a line is "point-slope form." That is ...

  y -k = m(x -h) . . . . . . line with slope m through point (h, k)

Perhaps you can see this would be useful for writing the equation of a line with slope -3 through the point (-1, 3).

  y -3 = -3(x +1) . . . . . . . line with slope -3 through point (-1, 3)

To find the distance that Jacob's truck skids before coming to a stop, we can use the formula for the distance traveled while braking, which is:

distance = initial velocity^2 / (2 * coefficient of friction * acceleration due to gravity)

In this case, the initial velocity is 9.5 m/s, the coefficient of friction is 0.847, and the acceleration due to gravity is 9.8 m/s^2. Plugging these values into the formula, we get:

distance = (9.5 m/s)^2 / (2 * 0.847 * 9.8 m/s^2)

Solving for distance, we get:

distance = 8.76 meters

Therefore, Jacob's truck will skid a distance of 8.76 meters before coming to a stop.

Factorials and the binomial theorem are utilized in the binomial distribution, a discrete probability distribution. Checking the sample space is the first step in deciding whether or not to use a binomial distribution with a given data set.

The binomial distribution would apply if there were multiple trials of the same experiment and only two outcomes in the sample space.

S=T,H,THT,H,THH,HTH,HHT,HHH in this case.

∴ n(S)=8.

Thus, the probability of each and every outcome is 18.

When tossing three coins, let X be the number of heads.

There can be 0, 1, 2, or 3 heads.

Therefore, X's possible values are 0, 1, 2, and 3.

P(X=0) = P (no head) = P(T) = 18.

P(X=1) = P (getting a single head) = P(HorTHTorH) = 38.

P (X=P (getting 2 P (THH, HTH, HHT)=38.

To learn more about binomial distribution here

https://brainly.com/question/14565246

#SPJ4

Answer: f(x) = 1

Step-by-step explanation:

     They tell us what we need to do, we must substitute x for 0 in the original function to find the initial value.

         [tex]f(x) = (\frac{1}{4} )^x[/tex]

         [tex]f(x) = (\frac{1}{4} )^0[/tex]

         [tex]f(x) = 1[/tex]

     * Anything raised to the power of 0 is equal to 1.

The spending would reach a figure of  1868 billon in the year 2031.

We know that we can be able to use a function to be able to show the relationship between variables and it can also serve as a model. In this case, we are modelling the spending by the use of the equation;

y = 1.48x^2 - 25.23x + 416.91

Let x be the number of years since 1990. Then we have that;

1868 =  1.48x^2 - 25.23x + 416.91

 1.48x^2 - 25.23x - 1451.1 = 0

When we solve the quadratic we have;

x =  41

In 41 years after 1990, the government spending would reach 1868 billon and that would be in 2031.

Learn more about mathematical models:https://brainly.com/question/10952874

#SPJ1

The area of the striped region (blue ones with angled strips on them) is equal to 3/4 square units.

First, we know that each square below is 1 square unit.

These squares are divided into rectangles of (1/2) by (1/6), then each one of these strips has an area equal to the product between the two dimensions, it gives:

(1/2)*(1/6) = 1/12 square units.

Now we need to count how many of the striped rectangles are, we can see that there are 9 of these, then the area of the striped region is:

A = 9*1/12 square units.

A = 9/12 square units

A = 3/4 square units.

Learn more about area:

https://brainly.com/question/24487155

#SPJ1

When constructing a perpendicular bisector of a segment, you should make arcs with the same radius from each endpoint as D. this makes the arcs parallel to the segment

A line segment that bisects another line segment at a 90° angle is known as a perpendicular bisector. In other words, a perpendicular bisector divides a line segment into two equal parts by intersecting it at a 90-degree angle.

A line segment known as a perpendicular bisector divides a straight line segment into two congruent or equal segments. At the exact midpoint of the line segment, they divide it. The arcs with the same radius from each endpoint is important as this makes the arcs parallel.

Learn more about segment on:

https://brainly.com/question/2437195

#SPJ1

On a graph of g(x) = -3x + 9 the x - intercept is identified to be

The points where a line crosses an axis are known as the x-intercept and the y-intercept, respectively.

It is x - intercept where the line crosses the x axis and y intercept where the line crosses the y axis

On the graph, the point where the line crosses the x axis is noted and written in ordered pair in the for (a, b)

Where a represents values in the x direction and y are values in the y direction

From the graph, a = 3 and b = 0

Learn more about x intercept at:

https://brainly.com/question/17932786

#SPJ1

Answer:

The answer is C. (3, 0)

Answer:

Length = 11"  and  width = 8".

Step-by-step explanation:

let L be the length of the rectangle

and w be its width.

Formula (perimeter P of a rectangle) :

P = 2 × (L + w)

================================

Then

L = w + 3

and

P = 2 × (L + w)

  = 2 × (w + 3 + w)

  = 2 × (2w + 3)

  = 4w + 6

Solving the equation P = 4w + 6  for w :

P = 4w + 6

⇔

38 = 4w + 6

⇔

32 = 4w

⇔

w = 32 ÷ 4

   = 8

Determining the length L :

L = w + 3

⇔

L = 8 ÷ 3

  = 11

Conclusion:

L = 11  and  w = 8

Answer:

Width = 8"

Step-by-step explanation:

2(t+w) = 38              Eq. 1

t = w+3                     Eq. 2

t = length

w = width

From Eq. 2:

t+w = 38/2

t+w = 19

t = 19 - w                    Eq. 3

Replacing Eq. 3 in Eq. 2:

19 - w = w + 3

19 - 3 = w + w

16 = 2w

16/2 = w

w = 8

Frm Eq. 2:

t = w + 3

t = 8 + 3

t = 11

Check:

From Eq. 1

2(t+w) = 38

2(11+8) = 38

2(19) = 38

As a result, the singers can finish first, second, third, fourth, or fifth in 524,160 different ways.

Permutation, where order is important:

_nP_{r}=\dfrac{n!}{(n-r)!}

P r = (n−r)!n!

Combination of definitions (order is irrelevant):

_nC_{r}=\dfrac{n!}{r!(n-r)!}n C r equals r!(nr)!n!

with n!=n, cdot (n-1) ..., cdot 2..., cdot 1n!=n(n1)...2,1.

We want to know how many different ways we can choose five people from a group of 16 (ranked first, second, third, fourth, and fifth).

n=16 n=16 r=5 r=5 Because we are interested in the first, second, third, fourth, and fifth places, order is important (changing the first and second places results in different rankings and prizes for the people), so we need to use a "textbf permutation" permutation.

Analyze the permutation definition:

"Begin align*" means "16P_5" and "dfrac" 16! color#8895cetextDefinition combination &=dfrac16!11!&color#8895cetext Evaluate difference &=dfrac16cdot 15cdot 14cdot 13cdot 12cdot 11cdot 10cdot...cdot 111cdot 10...cdot 1

16!= 11!

16! = 11⋅10⋅...⋅1

16⋅15⋅14⋅13⋅12⋅11⋅10⋅...⋅1

=16⋅15⋅14⋅13⋅12

=524,160

To learn more about Permutation here

https://brainly.com/question/1216161

#SPJ4

Full Question = There are 16 finalists in a singing competition. The top five singers receive prizes. How many ways can the singers finish first through fifth?

Answer:

44 unit^2.

Step-by-step explanation:

Divide the figure into 2 trlangles, a rectangle and a trapezium

Area = 2 * 1/2 *4 * 3 + 2 ** + 1/2 * 8 * (1 + 3)

        = 12 + 16 + 16

         = 44.