20 POINTS 20 POINTS On a bright sunny day you decide to take a walk. You begin at your home and walk 1000 meters to an ice cream shop in 10 minutes. You spend 15 minutes ordering your ice cream and then return home. Since you have an ice cream cone in your hand, it takes 20 minutes to walk home. 1. Find the total displacement and total distance traveled. 2. Find your average speed and average velocity in meters/min. 3. Find your average speed and average velocity in meters/sec.

Answer:

lamp oil.

Explanation: the ping pong ball doesnt sink through the lamp oil.

The complete question is;

In electronic circuits it is not unusual to encounter currents in the microampere range. Assume a 35 μA current, due to the flow of electrons. What is the average number of electrons per second that flow past a fixed reference cross section that is perpendicular to the direction of flow?

Answer:

2.185 × 10^(14) electrons/seconds

Explanation:

We are given current as 35 μA = 35 × 10^(-6) Amperes

The value of the charge on one electron is; e = 1.602 × 10^(-19) coulombs

Now, from conversions;

One ampere = one coulomb/second =

Then, 35 × 10^(-6) Ampere's would give;

35 × 10^(-6) Coulombs/sec

Now,

1.602 × 10^(-19) coulombs = 1 electron

Thus;

35 × 10^(-6) Coulombs/sec gives;

(35 × 10^(-6))/(1.602 × 10^(-19)) = 2.185 × 10^(14) electrons /sec

The average number of electrons per second that flow past a fixed reference cross-section perpendicular to the direction of flow is 2.185 × 10⁻¹⁴ electrons /sec

The question is as given below:

In electronic circuits, it is not unusual to encounter currents in the microampere range. Assume a 35 μA current, due to the flow of electrons. What is the average number of electrons per second that flow past a fixed reference cross-section that is perpendicular to the direction of flow?

Given information:

Current I = 35 μA = 35 × 10⁻⁶ A

charge on electron e = 1.602 × 10⁻¹⁹C

We know that:

I = de/dt, rate of flow of charge.

1A = 1C/s

Thus,

35 × 10⁻⁶ A = 35 × 10⁻⁶ C/s

Now, one electron has a charge of  1.602 × 10⁻¹⁹C

So, the number of electrons for a current of 35 × 10⁻⁶ C/s will be:

n = (35 × 10⁻⁶ C/s) ÷ (1.602 × 10⁻¹⁹C)

n = 2.185 × 10⁻¹⁴ electrons /sec

Learn more about current and charge:

https://brainly.com/question/1345174?referrer=searchResults

Answer:

Immune

Explanation:

because I remember taking that test and I I specifically remember that question and that's the answer

Answer:

This is caused by the rotation and position of the Earth with respect to the sun.

Explanation:

The constant change of the Moon's surface relative to Earth is called "The moon phases".

These modifications in our satellite are due to the change of position of the satellite with respect to the Earth and the Sun.

During the lunar phases of the third quarter and the first quarter, the moon lights up just a half, being that both only light half, the first quarter lights the right side of the moon, and the last quarter lights the left side.

Answer:

W23e45rdfytg

Explanation:

Eawsredtrftgvbyhgtfrd54e

One multicellular organism is a cube. Each of its sides is 3 cm long. If each of its cells is 1 cm, then it would have 27 cells, if each side doubles its length then it would have 216 cells.

Anything which has mass and occupies space is known as matter , mainly there are four states of matter solid liquid gas, and plasma.

These different states of matter have different characteristics according to which they vary their volume and shape.

As given in the problem, one multicellular organism is a cube. Each of its sides is 3 cm long. Each of its cells is 1 cm.

The volume of the  multicellular organism = 3 × 3× 3

                                                                      = 27 cm³

The number of cells = 27 cm³ / 1 cm³

                                  = 27

Thus, If each of its cells is 1 cm, then it would have 27 cells, if each side doubles its length then it would have 216 cells.

To learn more about the matter here, refer to the link given below ;

brainly.com/question/9402776

#SPJ2

Answer:

b. disorder in the universe is increasing with the passage of time

Explanation:

The second law of thermodynamics states that the total entropy of an isolated system  increases over time . The entropy of a system measures the randomness or disorder  in the system . So the we can state,  in terms of disorder , the second  law of thermodynamics as follows .

The disorder in the universe is increasing with the passage of time .

The second law of thermodynamics leads us to conclude that disorder in the universe is increasing with the passage of time. So, here, option b is the correct option.

Entropy is a measure of the disorder or randomness in a system. The second law of thermodynamics states that in any spontaneous process, the total entropy of an isolated system (including both the system and its surroundings) tends to increase or, at best, remain constant. This means that over time, natural processes tend to lead to an increase in the overall disorder or randomness of the system. It's important to note that while the increase in entropy is a statistical tendency on a macroscopic scale, there can still be localized decreases in entropy within a system. 

Learn more about the law of thermodynamics here.

https://brainly.com/question/17405303

#SPJ6

Complete Question

A boy throws a ball on a spring scales which oscillates about the equilibrium position with a period of T = 0.5 sec. The amplitude of the vibration is A = 2 cm. Assume the ball does not bounce from the scales’s surface afterwards. Assume the vibration of the scale is expressed mathematically as x(t) = Acos(t + ). Find:

a) frequency

b) the maximum acceleration

c) the maximum velocity

Answer:

a

[tex]f =  2  \ Hz[/tex]

b

[tex]a_{max} =  3.2 \ m/s^2[/tex]

c

[tex]v_{max} =  0.25 \  m/s[/tex]

Explanation:

From the question we are told that

   The period is  [tex]T  =  0.5 \ sec[/tex]

    The  amplitude is  [tex]A =  2 \ cm  =  0.02 \ m[/tex]

    The  vibration of the scale is  [tex]Acos(wt +  \phi )[/tex]

Generally the frequency is mathematically represented as

   [tex]f =  \frac{1}{T}[/tex]

=>   [tex]f =  \frac{1}{0.5}[/tex]

=>    [tex]f =  2  \ Hz[/tex]

The  maximum acceleration is mathematically represented as

    [tex]a_{max} =  A *(2 \pi f)^2[/tex]

=>    [tex]0.02 *  (2 * 3.142  *  2)^2[/tex]

=>  [tex]a_{max} =  3.2 \ m/s^2[/tex]

The  maximum velocity is mathematically represented as  

     [tex]v_{max} =  A *  (2 \pi f)[/tex]

=>    [tex]v_{max} =  0.02 *  (2 * 3.142 *  2)[/tex]

=>    [tex]v_{max} =  0.25 \  m/s[/tex]

Answer:

it is B 1:50

Explanation:

just did it on apex

Answer: his distance from the pole is 90.16 ft

Explanation:

based on the diagram of the question i will upload along this answer;

45 - d is equal to part of the pole below the horizontal line

d/x = tan(16) ; x = d/tan(16)............equ1

(45-d) / x = tan(12); x = (45-d) / tan(12)-----------equ2

∴ d/tan(16) = (45-d) / tan(12)

d.tan(12) = (45-d).tan(16)  

d.tan12 = (45×tan16) - d.tan16

0.2125d = 12.9034 - 0.2867d

0.2125d + 0.2867d = 12.9034

0.4992d = 12.9034

d = 12.9034/0.4992

d = 25.85 ft

now substitute value of d into any of our previous equation, lets take equation 1

x = 25.85 / tan(16)

x = 25.85 / 0.2867

x = 90.16 ft

Therefore his distance from the pole is 90.16 ft

You probably already took this but if anyone wanted to know the answer it's D. "A system where matter and energy cannot enter or leave the system".

(I also took the quiz for it and got it correct)

A closed physical system is a system where matter and energy cannot enter or leave the system. The correct option is D.

A physical system is any item or part of an object that can be analyzed using physics laws.

An atom and lake water are both examples of physical systems. Everything outside the system is referred to as the environment, and it is ignored in the analysis except for its effects on the system.

A physical system is a collection of parts or elements that, when combined, exhibit behavior that the constituents do not. Matter and energy make up physical systems.

A closed system is a natural physical system that does not allow the transfer of matter into or out of the system, though it does allow the transfer of energy in contexts such as physics, chemistry, or engineering.

Thus, the correct option is D.

For more details regarding a physical system, visit:

https://brainly.com/question/28095141

#SPJ2

Answer:

Explanation:

When a projectile is launched at some angle to the horizontal with some speed vi , and air resistance is negligible , it is definitely a freely falling body .

It is so because it is free to accelerate towards the earth with acceleration of g . Air has no resistance , hence no force is acting on it except the gravitational force . Hence it is a freely falling body .

b )

The acceleration in the vertical direction is due to force exerted by the earth that is gravitational force on it  . Hence its  acceleration is equal to g in vertically downward direction .

c )

It has zero acceleration in horizontal direction . It is so because no force is acting on it in horizontal direction . So no acceleration will be present in horizontal direction . It will move in horizontal direction with constant speed of vi cos θ where θ is the angle vi make with the horizontal .

Answer:

0.00004666N

Explanation:

We know that

intensity (I) = P/ A

Where

P= power

A= Area

So lets say that the power absorbed

Will be = Intensity x Area

Which Is = 1.4 x 10^3 x(10)

So

14000 Watt = 14 kWatt

However we know that radiation pressure is equal to

time-averaged intensity all over the speed of light in free space

So

P = (1.4 x 1000)/c

But

F= P x A

So

((1.4 x 1000)/(3 x1 0^8)) x 10

Which is

=0.000046666N

Explanation:

Answer:

Valid Expressions are; t = ∛(d²/va), a = d/t², a = √(vd/t³), v = at

while the Invalid expressions are;  v = a/t and  d = at

Explanation:

Given expressions

1) v = a/t

2) t = ∛(d²/va)

3) d = at

4) a = d/t²

5) a = √(vd/t³)

6) v = at

First we get our units of parameters

V = m/s, t = sec, d = m, a = m/s²

so

1)

v = a/t

we substitute in our units of parameters

v = m/s² / s = m/s² × 1/s = m/s³

v ≠ m/s³

therefore it is false

2)

t = ∛(d²/va)

we substitute

t = ∛(m² / m/s × m/s²)

t = ∛(m² / m²/s³)

t = ∛(s³)

t = s

correct, the expression is true

3)

d = at

we substitute

d = m/s² × s

d = m/s² × s/1 =  ms/s² = m/s

d ≠ m/s (because d = m)

so expression is false

4)

a = d/t²

we substitute

a = m / s² = m/s²

correct

the expression is true

5)

a = √(vd/t³)

we substitute

a = √(m/s×m / s³) = √(m²/s / s³) = √(m²/s × 1/s³)  = √(m²/s⁴) = m/s²

so a = m/s²

correct

the expression is true

6)

v = at

we substitute in the units

v = m/s² × s = m/s² ×s/1 = ms/s² = m/s

v = m/s

correct

the expression is correct

Answer:Newton’s law also states that larger bodies with heavier masses exert more gravitational pull, which is why those who walked on the much smaller moon experienced a sense of weightlessness, as it had a smaller gravitational pull. To help explain his theories of gravity and motion, Newton helped create a new, specialized form of mathematics.

Explanation:

Answer: newtons 2nd law of motion because in order to push the object you must put force to the mass and move it causing motion

Explanation:

Answer:

A. Using

I= P/ A

So = P/ 2π R²

So=777E3 watt/ 2*πx (²5.5E3m)

4.3*10^ -3W/m²

So pressure= 2I/c

=2* 4.3*10^ -3W/m²/ 3*10^ 8

2.7*10^-11p.a

B.

Using Emax= √2I/Eoc

So

√ 2*4.3*10^-3/8.8E-12*3*10^8

= 5.48V/m

So

Bmax= Emax/c

5.58/3E8

= 1.83*10-9T

D.average density is given by

= Eo(Emax/√2)²

= 8.85E-12(5.48/√2)²

1.3*10^10W/m²

The momentum of the truck is "56250 kgm/s".

According to the question,

Mass,

Velocity,

As we know,

→ [tex]p = mv[/tex]

By putting the values, we get

→    [tex]= 2250\times 25[/tex]

→    [tex]= 56250 \ kgm/s[/tex]

Thus the answer is right.

Learn more:

https://brainly.com/question/21433514

Answer:

Lost Money = $ 53200

Explanation:

First, we calculate the selling price of the cloth:

Selling Price = (Area of Bought Fabric)(Unit Price in America)

Selling Price = (500 m²)($ 120/yard²)(1 yard/0.9144 m)²

Selling Price = $ 71759.4

Now, we calculate the amount that the cloth maker paid (cost) for buying the fabric from America:

Cost = (Area of Fabric Bought)(Unit Selling Price)

Cost = (500 m²)(400 tepizes/ m²)($ 0.625/1 tepize)

Cost = $ 125000

Hence, the money lost is given as:

Lost Money = Cost - Selling Price

Lost Money = $ 125000 - $ 71759.4

Lost Money = $ 53240

Rounding off to 3 significant figures, we get:

Lost Money = $ 53200

Answer:

a= 18.4m

b= 26.2m

Explanation:

Please see the attached picture for full solution.

Answer:

We are given x= bt +ct²

So

A. bxt= m

Because m/s*s= m

So b= m/s and c= m/s²

B.

x= bt-ct²

So at x=0 t=0

x=0 t= 2

We have

bt = ct² so t = b/c at x= 0

So b-2ct= 0

B. To find velocity we use

dx / dt = b - 2 Ct

C. At rest wen V= 0

We have t= b/2c

D. To find acceleration we use

dv / dt = - 2C

When We are given x= bt +ct²

Learn more about:

https://brainly.com/question/14805815

Answer:

  [tex]\sqrt{\dfrac{2g\lambda^3}{m}}[/tex]

Explanation:

We can write the expression here, but the point of the problem seems to be to see if you can manipulate the controls on the answer box to reproduce that expression.

  [tex]\boxed{\sqrt{\dfrac{2g\lambda^3}{m}}}[/tex]

The answer is "the product of the object's moment of inertia and the object's angular velocity.

The correct definition of angular momentum would be that it is the product of the object’s moment of inertia and the object’s angular velocity, therefore the correct answer is option A.

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

As given in the problem we have to find the correct definition of angular momentum,

The angular momentum of the object = the moment of the inertia of the object × the angular velocity of the particle

The right response is option A since the definition of angular momentum is that it is the product of an object's moment of inertia and its angular velocity.

To learn more about momentum from here, refer to the link given below ;

brainly.com/question/17662202

#SPJ6

Answer:

50280 meters

Explanation:

33.52 meters/seconds is 2011.2 meters/minutes (multiply by 60)

2011.2 meters/m * 25 minutes = answer

Answer:

The  value  is  [tex]t = 10 \  s[/tex]

Explanation:

From the question we are told that

  The  height is  [tex]h = 500 \ m[/tex]

  The acceleration is  [tex]g =  10 \  m/s[/tex]

Generally from the second equation of motion we have that

    [tex]h  =  ut  +  \frac{1}{2} a t^2[/tex]

Here  the initial velocity u =  0  m/s  given that the stone started from rest

       So

            [tex]500 =  0 (t) +0.5 *  (10) t^2[/tex]

=>         [tex]t = 10 \  s[/tex]

Answer:

Explanation:

what is surface tension?

simply put, surface tension is the ability of water to act or behave as if it were or were covered by an elastic skin.

other notable examples of surface tension are

Examples of surface tension of water

1. Ants walking on water

2.Razor blades floating on water  

3. Capillary action (water rising or falling in a narrow capillary tube)

Should you need further clarification do not hesitate to let me know

Answer:

The electric field inside the conductor is zero.

Explanation:

In electrostatic equilibrium charges are assumed to be in rest. Therefore no current.

I = 0

From the ohm's law

ΔV= IR = 0

⇒ΔV =0

Therefore, potential V is same through the conductor.

Also, E = -ΔV d = 0

Hence, The electric field inside the conductor is zero.

Distance = (speed) x (time)

Distance = (10 meter/second) x (2 minutes)

Distance = (10 meter/second) x (2 minutes) x (60 second/minute)

Distance = (10 x 2 x 60) (meter-minute-second / second-minute)

Distance = 1,200 meters

The magnitude of Dot product of two vectors is 3.

     [tex]A= 4j - 2i - 3k[/tex]  and [tex]C= -4i -2j - 3k[/tex]

        [tex]A\cdot C=(-4*4)+(-2*-2)+(-3*-3)\\\\A\cdot C=-16+4+9\\\\A\cdot C=-16+13=-3[/tex]

Thus,  The magnitude of Dot product of two vectors is 3.

Find out more information about the Dot product here :

https://brainly.com/question/9956772

Answer:

Heat required in converting 1g of ice at −10∘C into steam at 100∘C is: latent heat of fusion= 80 cal/g80 cal/g. latent heat of vaporization=540 cal/g.

◈ Electric current :

Electric current is defined as the rate of charge flow. (per unit time)

I denotes current

Q denotes charge

t denotes time

Given : I = 2A and t = 2s

To Find : Charge flow in wire (Q)

[tex]:\implies\sf\:I=\dfrac{Q}{t}[/tex]

[tex]:\implies\sf\:2=\dfrac{Q}{2}[/tex]

[tex]:\implies\:\boxed{\bf{\red{Q=4\:C}}}[/tex]

A flow of electrical charge carriers, generally electrons or electron-deficient atoms, is referred to as current.  The charge that will be in the wire is 4 C.

A flow of electrical charge carriers, generally electrons or electron-deficient atoms, is referred to as current. The capital letter I is a typical sign for current. The ampere, abbreviated as A, is the standard unit.

As it is given to us that the current in the wire is 2A, while the time for which the current flows through the wire is 2 seconds.

[tex]\rm I=\dfrac Qt[/tex]

Substitute the value we will get,

[tex]\rm 2\ A = \dfrac{Q}{2\ sec}\\\\Q = 4\ C[/tex]

Thus, the charge that will be in the wire is 4 C.

Learn more about Current:

https://brainly.com/question/13076734

Answer:

The answer is a

Explanation: