Answer:
Part I: The degree of a polynomial is the greatest of the degrees of its terms.
Part II: In order to write a polynomial in descending order, you must write the terms with the exponents decreasing from left to right.
Part III: A. -4x² + 11x - 12, degree = 2,
B. 5x³ + 4x + 14, degree = 3.
Step-by-step explanation:
Part I : Since the degree of a polynomial is the highest power of its monomials ( single term ),
e: degree of is 5.
Thus, in part I, the correct option is 'greatest'
Part II: When we write a polynomial then we write the terms of the polynomial in descending order of their degrees.
Thus, in part II the correct option is 'least'
Part III: A.
∵ -4x² has the highest power in the polynomial.
⇒ Degree = 2,
Also, in the polynomial descending order of degrees,
2 > 1 > 0
⇒ polynomial in descending order,
B.
Combining like terms,
∵ 5x³ has the highest degree,
⇒ Degree = 3,
Also, the order of the degrees in the polynomial is,
3 < 2 < 1 < 0
Thus, the polynomial in descending order,
Answer: I had trouble with this one too.
Step-by-step explanation:
determine (a) the x y and z components of the 450-n force, and the angles
The x-component of the 450 N force is 0 N, the y-component is -450 N, and the z-component is 0 N. The angles associated with the force are 90 degrees with the x-axis and 180 degrees with the z-axis.
To determine the x, y, and z components of a force, we need to express the force in terms of its magnitude and direction angles. The x-component represents the force's projection onto the x-axis, the y-component represents the projection onto the y-axis, and the z-component represents the projection onto the z-axis.
In this case, the force has no component along the x-axis, so the x-component is 0 N. The force's entire magnitude is directed in the negative y-direction, so the y-component is -450 N. Similarly, the force has no component along the z-axis, so the z-component is 0 N.
As for the angles, the force is perpendicular to the x-axis, resulting in a 90-degree angle. The force is also directed opposite to the positive z-axis, resulting in a 180-degree angle with the z-axis.
Therefore, the x-component of the force is 0 N, the y-component is -450 N, and the z-component is 0 N. The angles associated with the force are 90 degrees with the x-axis and 180 degrees with the z-axis.
Learn more about angles here:
https://brainly.com/question/31818999
#SPJ11
An engineer designs a structure that is is 21 feet long and 3
yards high. What is the ratio of length to height?
Answer:
7:3
Step-by-step explanation:
Convert one of the measurements to the other before attempting to solve the question.
1 yard = 3 feet
Multiply both sides by 3 to get:
3 yards = 9 feet
Therefore the ratio would be
21:9
Simplify to 7:3 length to height.
A farmer has 600m of fencing to enclose a rectangular area and divide sections as shown. a) write a equation to express the total area enclosed as a function of the length x. I b) Determine the domain and the range of this area function.
The domain of the area function is 0 < x ≤ 300, and the range is A > 0. The total area enclosed by a rectangular fence, given a fixed amount of fencing, can be expressed as a function of the length of one side.
The domain and range of this area function depend on the constraints imposed by the amount of fencing available.
a) To express the total area enclosed as a function of the length x, we need to consider that the perimeter of a rectangle is twice the sum of its length and width. Since the farmer has 600m of fencing, we can write the equation:
2x + 2y = 600
Solving for y, we can express it in terms of x:
y = (600 - 2x) / 2
The area of the rectangle is given by the product of its length and width:
A = x * y = x * (600 - 2x) / 2
b) The domain of the area function is determined by the values of x that satisfy the constraints of the problem. Since x represents the length of one side of the rectangle, it must be positive (x > 0). Additionally, the sum of the lengths of all four sides must be less than or equal to the available fencing, which gives us the constraint: 2x + 2y ≤ 600.
The range of the area function represents the possible areas of the enclosed rectangle. Since both x and y are positive, the range is also positive.
Therefore, the domain of the area function is 0 < x ≤ 300, and the range is A > 0.
Learn more about perimeter here:
https://brainly.com/question/7486523
#SPJ11
Find the measures of the missing angles
Help pleaseee
Answer:
Nwm miałem to dawno powodzenia
help will mark brainliest also do u like my green screen?
Answer:
Cubes in each layer: 6
Number Of Layers: 5
Volume: 30
Reconstruction failed to establish racial equality and black freedom. Explain how the rapid industrialization of the United States under the system of "free labor" in the years after the Civil War led to a social crisis by the end of the nineteenth century in which the traditional American values of democracy, equality, and opportunity seemed to be disappearing, and in which class conflict threatened to tear society apart. How did the capitalists and working classes attempt to enhance their own power and interests in their struggle with each other? Why was the working class unable to achieve much, despite valiant efforts? How did the middle-class respond to the struggle between labor and capital as well as the changes that American society underwent during the late nineteenth century?
The working class was unable to achieve much, despite valiant efforts, due to their lack of solidarity and the capitalist's willingness to use violence against them.The middle class responded to the struggle between labor and capital, as well as the changes that American society underwent during the late nineteenth century, by supporting a variety of social reform movements.
After the Civil War, Reconstruction failed to establish racial equality and black freedom in the United States. The rapid industrialization of the United States under the system of "free labor" in the years following the Civil War contributed to a social crisis by the end of the nineteenth century. This crisis seemed to be causing the disappearance of traditional American values of democracy, equality, and opportunity, and class conflict was threatening to tear society apart.In their struggle against each other, capitalists and working classes attempted to enhance their own power and interests. Capitalists attempted to enhance their power by instituting new labor policies, cutting wages, and lowering working conditions.
The working class was unable to achieve much, despite valiant efforts, due to their lack of solidarity and the capitalist's willingness to use violence against them.The middle class responded to the struggle between labor and capital, as well as the changes that American society underwent during the late nineteenth century, by supporting a variety of social reform movements. They sought to provide relief for the urban poor and to reform politics by promoting women's suffrage and demanding the elimination of political corruption.In conclusion, Reconstruction failed to establish racial equality and black freedom in the United States. The rapid industrialization of the United States under the system of "free labor" in the years following the Civil War contributed to a social crisis by the end of the nineteenth century. Capitalists and working classes attempted to enhance their power and interests in their struggle with each other. The working class was unable to achieve much, despite valiant efforts. The middle class responded to the struggle between labor and capital, as well as the changes that American society underwent during the late nineteenth century, by supporting a variety of social reform movements.
Learn more about American society here:
https://brainly.com/question/12006768
#SPJ11
Gerald’s truck is in need of repairs totaling $3,000. Gerald is considering how he will pay for these repairs.
Hello again!
Answer:
The correct answer is B. 18 months.
Step-by-step explanation:
I just typed in "credit card payoff calculator" in g00gle, and it should be the first one you see.
That was the website I used to solve this problem. You can use that for other problems you need to solve too.
Hope this helps :)
PLEASE HELP THANKS
-----------------------------------
Answer:
the answer should be 25, 32 , 40
Step-by-step explanation:
it does not follow the Pythagoras theorem
good day mate
Determine the next term in the geometric sequence below.
-1, -2, -4, ...
-7
-10
-8
-6
Answer:
-8
Step-by-step explanation:
The rule for the sequence is ×2
E.g.
-1×2=-2
-2×2=-4
-4×2=-8
Answer:
-8 is the correct answer according to the sequence's rule.
Vincent started driving at 45 miles per hour. After he drove 10 miles his friend Bill started driving the same route at a rate of 45 miles per hour. If they continue to drive at the same rate will Bill ever catch up to Vincent?
Answer: No
Step-by-step explanation: Vincent started 10 miles ahead so Bill will never catch up at this rate
Math help me out this is tricky man hurry solve both
Answer:
1) a , b , c , e are ans....
2) a.F b.T c.F d.T
a magazine includes a report on the energy costs per year for 32-inch liquid crystal display (lcd) televisions. the article states that 14 randomly selected 32-inch lcd televisions have a sample standard deviation of $3.90. use a 99% level of confidence. (
We can conclude that with 99% confidence, the true population mean energy cost per year falls between $13.38 and $19.62.
A report in a magazine contains information on energy costs per year for 32-inch liquid crystal display (LCD) televisions. According to the report, a sample of 14 randomly selected 32-inch LCD televisions have a sample standard deviation of $3.90. Using a 99% level of confidence, the confidence interval for the true population mean energy cost per year can be calculated. A 99% level of confidence indicates that there is only a 1% chance that the true population mean energy cost per year falls outside the interval.Confidence Interval for Mean = $\bar{X}±t_{\frac{\alpha}{2},n-1}\frac{S}{\sqrt{n}}$Where, $\bar{X}$ is the sample mean,S is the sample standard deviation,n is the sample size,t is the critical value of t-distributionα is the level of significancet= 3.71 (using t-distribution table for 99% level of confidence with n - 1 degrees of freedom)Mean = $16.50 ± 3.71 × \frac{3.90}{\sqrt{14}}$=$16.50 ± 3.12$The 99% confidence interval for the true population mean energy cost per year is (13.38, 19.62). Therefore, we can conclude that with 99% confidence, the true population mean energy cost per year falls between $13.38 and $19.62.
Learn more about mean here:
https://brainly.com/question/30112112
#SPJ11
The graph shows the function f(x).
Which value is closest to the average rate of change from x = 1 to x = 3?
−3.5,
−2.3,
−1.8,
−0.3,
Answer:
-3.5
Step-by-step explanation:
Principal = $47,300 Rate = 3% Time = 4 months What will the total payment plus interest be?
Answer:
Simple Interest (I) = Principle * Rate * Time
so I = PRT
P = $47300
R = 3% = 0.03
T = 4months = 0.33years
so
Assuming its per year after 4month
I = (47300)(0.03)(0.333333)
I = 472.999527
I = $473
Now we'd add the interest(I) to the Principle
$47300 + $473 = $47773.00
Assuming it is per month, after 4months
I = PRT
I = (47300)(0.03)(4)
I = $5676.00
Now add the interest to the principle
$47300 + $5676 = $52976.00
Step-by-step explanation:
there you go hope this help
Assuming that 8 is a constant, solve the following problem for Laplace's Equa- tion in the upper half plane: PDE: 4x + y = 0, on - 0 a, and furthermore assuming that u(x,y) → 0 uniformly in x as y → 8.
The problem involves solving Laplace's equation in the upper half plane with the boundary condition given by the equation 4x + y = 0 on the line segment -0 ≤ x ≤ a. Additionally, it is assumed that the solution u(x, y) approaches zero uniformly as y approaches infinity.
Laplace's equation in two dimensions is given by ∇²u = 0, where u(x, y) is the unknown function and ∇² is the Laplacian operator. In this problem, we are specifically interested in solving Laplace's equation in the upper half plane.
To solve Laplace's equation in the upper half plane with the given boundary condition, we can use the method of separation of variables. We assume a solution of the form u(x, y) = X(x)Y(y) and substitute it into Laplace's equation. This leads to two separate ordinary differential equations, one for X(x) and one for Y(y).
Solving the equation for X(x), we obtain a solution in terms of x. Similarly, solving the equation for Y(y), we obtain a solution in terms of y. By applying the given boundary condition 4x + y = 0 on the line segment -0 ≤ x ≤ a, we can determine the specific form of the solution.
The assumption that u(x, y) approaches zero uniformly as y approaches infinity indicates that the solution must decay as y increases. This condition further constrains the form of the solution and allows us to determine the behavior of the solution as y approaches infinity.
By solving the separated differential equations and applying the boundary condition and the assumption of uniform decay, we can obtain the solution to Laplace's equation in the upper half plane with the given conditions.
Learn more about Laplace's equation here:
https://brainly.com/question/31583797
#SPJ11
Let X be a set. Let P be a set of subsets of X such that: • Ø∉P • the union of all sets AEP is X. Note that these are clauses (a) and (c) of the definition of a partition (Definition 1.5). Now define a relation R on the set X by R={(x,y):x∈A and y ∈ A for some A ∈ P), as in Theorem 1.7(b). Which of the following is true? Select one: a. R must be symmetric and transitive but might not be reflexive. b. R must be an equivalence relation, but ( [x]_R : x∈X) might not be equal to P. C. R must be reflexive and transitive but might not be symmetric. d. R must be an equivalence relation, and ( [x]_R: x∈X) must equal P. e. R must be reflexive and symmetric but might not be transitive.
The following statement (d) "R must be an equivalence relation, and ([x]_R: x∈X) must equal P." is true
The relation R defined as R={(x,y):x∈A and y∈A for some A∈P} is an equivalence relation.
1. Reflexivity: Since the set P does not contain the empty set, Ø∉P, for any element x∈X, there exists a set A∈P such that x∈A. Therefore, (x,x)∈R for all x∈X, making R reflexive.
2. Symmetry: Let (x,y)∈R, which means there exists a set A∈P such that x∈A and y∈A. Since A is a subset of X, it follows that y∈A and x∈A as well. Hence, (y,x)∈R, and R is symmetric.
3. Transitivity: Let (x,y)∈R and (y,z)∈R, which means there exist sets A and B in P such that x∈A, y∈A, y∈B, and z∈B. Since the union of all sets in P is X, the union of A and B is also a set in P. Thus, x∈A∪B, and z∈A∪B. Therefore, (x,z)∈R, and R is transitive.
Since R is reflexive, symmetric, and transitive, it satisfies the properties of an equivalence relation.
Additionally, the equivalence classes ([x]_R: x∈X) of R are equal to the set P. Each equivalence class [x]_R represents a subset of X that contains all elements y∈X such that (x,y)∈R. In this case, for each x∈X, the corresponding equivalence class [x]_R is the set A∈P such that x∈A.
To know more about equivalence relations, refer here:
https://brainly.com/question/31479048#
#SPJ11
I Need Help ..
4. Evaluate the functions,
Let f(0) = 21-1 and 8(x) - 7-4 find
a. /(0)
b. S(1)
c. (-1)
en g(0)
f. 8(-2)
Answer: cos ( 390 ) − 4 cot ( − 45 ) sin (330 )
Step-by-step explanation: MAKE ME BRANLIEST!!!!!!
You and your friend decide to conduct a survey at your school to see whether students are in favor of a new dress code policy. Your friend stands at the school entrance and asks the opinions of the first 100 students who came to campus on Monday. You obtain a list of all students at the school and randomly select 60 to survey
Your friend finds 34% of his sample in favor of the new dress code policy, but you find only 16%. Which do you believe us more likely to be representative of the school population? Explain your choice.
Answer:
34% in favor of the new dress code
Step-by-step explanation:
Because it has a higher percentage and when there is only 16% of students that doesn't really prove the claim or statement. But, when there is more participating or voting that claim or statement is supported.
Complementary of supplementary? Find the value of x
Answer: x=6
The two angles shown in each are complementary because they add up to 90°.
10 & 12 would be supplementary to one another because they would add up to 180°.
Step-by-step explanation:
We know that on both 10 & 12 the angles add up to equal 90° so...
10. 8x+7x=90
15x=90
x=6
12. it's the same in pic as 10
The two angles shown in each are complementary because they add up to 90°.
10 & 12 would be supplementary to one another because they would add up to 180°.
13=X/4
A. 13/4
B. 4/13
C. 52
D. 9
Answer:
Hi! The answer to your question is C. 52
Step-by-step explanation:
☆*: .｡..｡.:*☆☆*: .｡..｡.:*☆☆*: .｡..｡.:*☆
☆Brainliest is greatly appreciated!☆
Hope this helps!
- Brooklynn Deka
NEED HELP ASAP!!! At a movie theater, the price of 2 adult tickets and 4 child tickets is $48. The price of 5 adult tickets and 2 child tickets is $64.
Let x be the cost of an adult ticket and let y be the cost of a child ticket. Write and solve a system of equations to find the ticket price for one adult and for one child.
Answer:
Step-by-step explanation:
2x+4y=48
5x+2y=64
Adult ticket: $10 Child ticket: $7
For 2 adults and 3 children with the given price per ticket, the family having brought $40 as a budget, their budget would not be high enough as the total would come to be $41. They'd be a dollar short.
help pleaseee ! whoever’s answers first ill mark as brainylest
Answer: 4 is i think 0.2 an 5 is 10
Step-by-step explanation:
b=17-12
h=18-14
b=5cm
h=4cm
1cm=0.0328
b=5×0.0328
b=0.164 ft
c=4×0.0328
c=0.131 ft
Give me brainliesst plzzzzz
Give the characterisations for finito, ineinte, denumwable, cos weak then show that 22 is denumerable
1. Finite: A set is considered finite if it contains a specific number of elements. In other words, a set is finite if you can count its elements and reach a finite number. For example, a set containing {1, 2, 3} is finite because it has three elements.
2. Infinite: A set is considered infinite if it has an uncountable number of elements. This means that the set cannot be put into a one-to-one correspondence with the natural numbers (1, 2, 3, ...). For example, the set of all integers {..., -3, -2, -1, 0, 1, 2, 3, ...} is infinite.
3. Denumerable: A set is denumerable (also called countable) if its elements can be put into a one-to-one correspondence with the natural numbers (1, 2, 3, ...). In other words, a denumerable set has a countable number of elements. For example, the set of all natural numbers is denumerable.
To know more about Denumerable:
https://brainly.com/question/31421629
#SPJ4
Point A(4,5) is translated to the left 3 and up 5. What is A'?
Answer:
(7,10)
Step-by-step explanation:
x=4+3
y=5+5
please help 6th grade math i will give brainliest
Answer:
8
Step-by-step explanation:
First add all the terms together.
[tex]8+7+5+9+6+13=48[/tex], so the total is 48.
Then you divide the total by the number of terms (which is 6) to get the mean.
[tex]\frac{48}{6}=8[/tex], so the mean is 8.
A plane takes off and climbs steadily for 15 minutes until it reaches 30,000 feet. It travels at that altitude for 2 hours until it begins to descend to land, which takes 15 minutes at a constant rate
picture included !
Find the solution to the system
of equations.
A formula of order 4 for approximating the first derivative of a function f gives: f'(0) - 0.08248 for h = 1 f(0) = 0.91751 for h = 0.5 By using Richardson's extrapolation on the above values, a better approximation of f'(0) is: 0.17095 1.00177 0.97318 1.93645
The better approximation for f'(0) using Richardson's extrapolation is approximately 1.75254. So none of the options are correct.
Richardson's extrapolation is a technique used to improve the accuracy of numerical approximations by combining multiple estimates of a quantity. It is commonly applied in numerical analysis and computational mathematics.
To use Richardson's extrapolation, we can apply the formula:
[tex]f'(0) =\frac{2^p * f'(h) - f'(2h)}{2^p - 1}[/tex]
Given the values:
f'(0) = 0.08248 for h = 1
f'(0) = 0.91751 for h = 0.5
We can substitute these values into the Richardson's extrapolation formula:
[tex]f'(0) =\frac{2^1 * 0.91751 - 0.08248}{2^1 - 1}[/tex]
[tex]f'(0)= \frac{1.83502 - 0.08248}{1}[/tex]
[tex]f'(0)=1.75254[/tex]
Therefore, the better approximation for f'(0) using Richardson's extrapolation is approximately 1.75254.
None of the provided options (a, b, c, d) match this value, so none of them are correct.
The question should be:
A formula of order 4 for approximating the first derivative of a function f gives:
f'(0) = 0.08248 for h = 1
f'(0) = 0.91751 for h = 0.5
By using Richardson's extrapolation on the above values, a better approximation of f'(0) is:
a. 0.17095
b. 1.00177
c. 0.97318
d. 1.93645
To learn more about values: https://brainly.com/question/30236354
#SPJ11
Suppose you waited 10 years to invest in the same retirement fund and have the same $400,000 for retirement at the same 8% interest. What amount will you have to deposit each month to match the value of your annuity?
Answer:
$7,196.42
Step-by-step explanation:
Using the compound interest formula to fins the amount after 10years;
A = P(1+r)^n
Principal P = $400,000
Rate r = 8% = 0.08
Time t = 10 years
Substitute
A = 400,000(1+0.08)^10
A = 400,000(1.08)^10
A = 400,000(2.1589)
A = 863,569.99
A ≈ 863,570
Hence the amount after 10 years is $863,570
Monthly deposit = $863,570/120 (10 years is equivalent to 120months)
Monthly deposit = 7,196.42
Therefore he will have to deposit $7,196.42 into his account monthly
b. consider the following system, where you are applying a load p: mathematically, show which system is harder to tip over if a = 0.75b, b = 10, and c = 0.5a. assume both blocks have the same weight.
If we consider a system where block A has a length of 0.75 times block B's length, block B has a length of 10, and block C has a length of 0.5 times block A's length, we can determine which block is harder to tip over.
To analyze the stability of the system, we can compare the center of mass of each block relative to its base of support. The block with a higher center of mass is more likely to tip over.
For block A, its center of mass is located at a distance of 0.375 times its length from its base.
For block B, its center of mass is located at a distance of 5 units from its base.
For block C, its center of mass is located at a distance of 0.375 times block A's length from its base.
Comparing the distances, we see that block B has the highest center of mass at 5 units, making it easier to tip over compared to blocks A and C. Thus, in this system, block B is harder to keep stable and more prone to tipping over.
Learn more about stability here: brainly.com/question/808264
#SPJ11